U.S. Bicycle Route

The United States Bicycle Route System (abbreviated USBRS) is the national cycling route network of the United States. It consists of interstate long-distance cycling routes that use multiple types of bicycling infrastructure, including off-road paths, bicycle lanes, and low-traffic roads. As with the complementary United States Numbered Highways system for motorists, each U.S. Bicycle Route is maintained by state and local governments. The USBRS is intended to eventually traverse the entire country, like the Dutch National Cycle Routes and the United Kingdom's National Cycle Network, yet at a scale similar to the EuroVelo network that spans Europe.

The USBRS was established in 1978 by the American Association of State Highway and Transportation Officials (AASHTO), the same body that coordinates the numbering of Interstate highways and U.S. Routes. The first two U.S. Bicycle Routes were established in 1982 and remained the only two until 2011. Steady growth and interest in the system has followed since. , 29 parent routes and 24 child routes extend across 34 states and the District of Columbia. The system, once fully connected, is projected to encompass over of bike routes.

Layout

Like United States Numbered Highways and many national routing systems, the U.S. Bicycle Route system is designed to roughly follow a grid. Mainline routes are the major cross-country routes and are represented with one- or two-digit numbers. Even-numbered routes are planned to primarily run east–west, with low-numbered routes in the north and high-numbered routes in the south. Odd-numbered routes will primarily run north–south, with low-numbered routes starting in the east and ascending in number toward the west. Three-digit numbers are assigned to auxiliary routes, with the last two digits denoting the parent that the auxiliary connects to. Much like other routing systems, the grid is sometimes violated; for example, U.S. Bicycle Route 76 (USBR 76) is projected to turn to the north in Colorado and end in Oregon as opposed to California, south of (and temporarily concurrent with) USBR 20 but far north of USBR 50. As with auxiliary Interstate Highways, two distinct U.S. Bicycle Routes in two different states along the same mainline route may share the same three-digit number without any plan to connect the routes. The first example of this repetition occurred in 2021 with the approval of USBR 230 in Ohio, which is not intended to connect to an existing USBR 230 in Wisconsin.

The existing USBR 1 will be the easternmost route, though USBR 5 will run farther east of it in Virginia and the Carolinas. The westernmost and northernmost routes are USBR 97 and USBR 8, respectively, both of which are in the state of Alaska, but USBR 97 also enters Washington. Outside of Alaska, the westernmost route is expected to be USBR 95 and the northernmost USBR 8. USBR 90 is expected to be the southernmost route. Despite the analogy the system has to the U.S. Highway system, the USBRS's route numbers do not necessarily trace the same route as the corresponding U.S. Highway number; for example, while USBR 1 will run close to the East Coast and thus parallel U.S. Route 1 (US 1), the projected route of USBR 10 generally follows US 2.

In order for a route to qualify as a U.S. Bike Route, it needs to connect two or more states, connect multiple U.S. Bike Routes, or connect a U.S. Bike Route with a national border.

History

The USBRS was established in 1978 by AASHTO for the purpose of "facilitat ngtravel between the states over routes which have been identified as being more suitable than others for cycling."

The first routes were defined in 1982: U.S. Bicycle Route 1 (USBR 1) from North Carolina to Virginia, and the stretch of USBR 76 from Illinois through Kentucky to Virginia. These two routes remained the only routes in the system until 2011. In the interim, only minor routing changes had been made in Virginia.

AASHTO established a new task force in 2003 to study expansion of the system. The task force included state and federal highway officials and representatives from bicycling organizations. In October 2008, AASHTO approved a national-level corridor and route designation plan. Other organizations involved in the effort include state departments of transportation, the Federal Highway Administration (FHWA), and the Adventure Cycling Association.

In 2009, the U.S. House of Representatives proposed moving the U.S. Bicycle Route System under the authority of the FHWA as part of a new Office of Livability. In 2009, the FHWA published a new edition of the ''Manual on Uniform Traffic Control Devices'' that introduces a revised U.S. Bicycle Route shield. Compared to the 2003 edition, the new design swaps the bicycle symbol and route number.

In early May 2011, the first major expansion of the system was made. Five new parent routes, two child routes, and one alternate route were created, along with modifications to the existing routes in Virginia and the establishment of USBR 1 in New England.
* U.S. Bicycle Route 1 now has an additional run from the state of Maine to New Hampshire.
* U.S. Bicycle Route 1A is a sea-side alternate route for USBR 1 in Maine.
* U.S. Bicycle Route 8 runs from Fairbanks, Alaska, along the Alaska Highway