Transmit-after-receive Time Delay
   HOME

TheInfoList



OR:

In
telecommunications Telecommunication, often used in its plural form or abbreviated as telecom, is the transmission of information over a distance using electronic means, typically through cables, radio waves, or other communication technologies. These means of ...
, transmit-after-receive time delay is the time interval from removal of RF energy at the local receiver input until the local transmitter is automatically keyed on and the transmitted
RF signal Radio waves (formerly called Hertzian waves) are a type of electromagnetic radiation with the lowest frequencies and the longest wavelengths in the electromagnetic spectrum, typically with frequencies below 300 gigahertz (GHz) and wavelengths g ...
amplitude has increased to 90% of its steady-state value. ''An Exception:''
High-frequency High frequency (HF) is the International Telecommunication Union, ITU designation for the radio band, band of radio waves with frequency between 3 and 30 megahertz (MHz). It is also known as the decameter band or decameter wave as its wavelengt ...
(HF)
transceiver In radio communication, a transceiver is an electronic device which is a combination of a radio ''trans''mitter and a re''ceiver'', hence the name. It can both transmit and receive radio waves using an antenna, for communication purposes. The ...
equipment is normally not designed with an interlock between receiver
squelch In telecommunications, squelch is a circuit function that acts to suppress the audio (or video) output of a receiver in the absence of a strong input signal. Essentially, squelch is a specialized type of noise gate designed to suppress weak s ...
and transmitter on-off key. The transmitter can be keyed on at any time, independent of whether or not a signal is being received at the receiver input.


See also

* Attack-time delay * Receive-after-transmit time delay


References

* Telecommunications engineering Radio technology {{telecomm-stub