Titanium diboride (TiB₂) is an extremely hard ceramic which has excellent heat conductivity, oxidation stability and

wear resistance Wear is the damaging, gradual removal or deformation of material at solid surfaces. Causes of wear can be mechanical (e.g., erosion) or chemical (e.g., corrosion). The study of wear and related processes is referred to as tribology. Wear in ...

. TiB₂ is also a reasonable electrical conductor,J. Schmidt et al. "Preparation of titanium diboride TiB2 by spark plasma sintering at slow heating rate" Sci. Technol. Adv. Mater. 8 (2007) 37
free download
/ref> so it can be used as a cathode material in

aluminium smelting Aluminium smelting is the process of extracting aluminium from its oxide, alumina, generally by the Hall-Héroult process. Alumina is extracted from the ore bauxite by means of the Bayer process at an alumina refinery. This is an electrolyt ...

and can be shaped by

electrical discharge machining Electrical discharge machining (EDM), also known as spark machining, spark eroding, die sinking, wire burning or wire erosion, is a metal fabrication process whereby a desired shape is obtained by using electrical discharges (sparks). Material i ...

Physical properties

TiB₂ shares some properties with

boron carbide Boron carbide (chemical formula approximately B4C) is an extremely hard boron–carbon ceramic, a covalent material used in tank armor, bulletproof vests, engine sabotage powders, as well as numerous industrial applications. With a Vickers ha ...

and

titanium carbide Titanium carbide, Ti C, is an extremely hard ( Mohs 9–9.5) refractory ceramic material, similar to tungsten carbide. It has the appearance of black powder with the sodium chloride (face-centered cubic) crystal structure. It occurs in nature ...

, but many of its properties are superior to those of B₄C & TiC:

Exceptional hardness at extreme temperature

*2nd hardest material at 3000°C (#

diamond Diamond is a solid form of the element carbon with its atoms arranged in a crystal structure called diamond cubic. Another solid form of carbon known as graphite is the chemically stable form of carbon at room temperature and pressure, ...

) *3rd hardest material at 2800°C (#

cBN CBN, or cbn, may refer to: Broadcasting organizations * Radio stations in St. John's, Newfoundland: ** CBN (AM), CBC Radio One ** CBN-FM, CBC Music * Chronicle Broadcasting Network, the predecessor of ABS-CBN * CBN (Australian TV station), a TV s ...

) *4th hardest material at 2100°C (# B₄C) *5th hardest material at 1000°C (# B₆O)

Advantages over other borides

*Highest boride

elastic modulus An elastic modulus (also known as modulus of elasticity) is the unit of measurement of an object's or substance's resistance to being deformed elastically (i.e., non-permanently) when a stress is applied to it. The elastic modulus of an object i ...

*Highest boride

fracture toughness In materials science, fracture toughness is the critical stress intensity factor of a sharp crack where propagation of the crack suddenly becomes rapid and unlimited. A component's thickness affects the constraint conditions at the tip of a ...

*Highest boride

compressive strength In mechanics, compressive strength or compression strength is the capacity of a material or structure to withstand loads tending to reduce size (as opposed to tensile strength which withstands loads tending to elongate). In other words, compre ...

*2nd highest boride

melting point The melting point (or, rarely, liquefaction point) of a substance is the temperature at which it changes state from solid to liquid. At the melting point the solid and liquid phase exist in equilibrium. The melting point of a substance depends ...

(3225 °C) (# HfB₂)

Other advantages

*High

thermal conductivity The thermal conductivity of a material is a measure of its ability to conduct heat. It is commonly denoted by k, \lambda, or \kappa. Heat transfer occurs at a lower rate in materials of low thermal conductivity than in materials of high thermal ...

(60-120 W/(m K)), *High

electrical conductivity Electrical resistivity (also called specific electrical resistance or volume resistivity) is a fundamental property of a material that measures how strongly it resists electric current. A low resistivity indicates a material that readily allows ...

(~10⁵ S/cm)

Drawbacks

* Difficult to

mold A mold () or mould () is one of the structures certain fungi can form. The dust-like, colored appearance of molds is due to the formation of spores containing fungal secondary metabolites. The spores are the dispersal units of the fungi. Not ...

due to high melting temperature * Difficult to sinter due to the high

covalent bonding A covalent bond is a chemical bond that involves the sharing of electrons to form electron pairs between atoms. These electron pairs are known as shared pairs or bonding pairs. The stable balance of attractive and repulsive forces between atom ...

* Limited to pressing to small Monolithic pieces using of

spark plasma sintering Spark plasma sintering (SPS), also known as field assisted sintering technique (FAST) or pulsed electric current sintering (PECS), or plasma pressure compaction (P2C) is a sintering technique. The main characteristic of SPS is that the pulsed or u ...

Chemical properties

With respect to chemical stability, TiB₂ is more stable in contact with pure iron than

tungsten carbide Tungsten carbide (chemical formula: WC) is a chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon atoms. In its most basic form, tungsten carbide is a fine gray powder, but it can be pressed and formed int ...

silicon nitride Silicon nitride is a chemical compound of the elements silicon and nitrogen. is the most thermodynamically stable and commercially important of the silicon nitrides, and the term "silicon nitride" commonly refers to this specific composition. It ...

. TiB₂ is resistant to oxidation in air at temperatures up to 1100 °C, and to hydrochloric and hydrofluoric acids, but reacts with

alkali In chemistry, an alkali (; from ar, القلوي, al-qaly, lit=ashes of the saltwort) is a basic, ionic salt of an alkali metal or an alkaline earth metal. An alkali can also be defined as a base that dissolves in water. A solution of ...

nitric acid Nitric acid is the inorganic compound with the formula . It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available ni ...

and sulfuric acid.

Production

TiB₂ does not occur naturally in the earth. Titanium diboride powder can be prepared by a variety of high-temperature methods, such as the direct reactions of

titanium Titanium is a chemical element with the Symbol (chemistry), symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resista ...

or its oxides/hydrides, with elemental boron over 1000 °C, carbothermal reduction by

thermite reaction Thermite () is a pyrotechnic composition of metal powder and metal oxide. When ignited by heat or chemical reaction, thermite undergoes an exothermic reduction-oxidation (redox) reaction. Most varieties are not explosive, but can create brief ...

titanium oxide Titanium oxide may refer to: * Titanium dioxide Titanium dioxide, also known as titanium(IV) oxide or titania , is the inorganic compound with the chemical formula . When used as a pigment, it is called titanium white, Pigment White 6 (PW6), o ...

and boron oxide, or hydrogen reduction of boron halides in the presence of the metal or its halides. Among various synthesis routes, electrochemical synthesis and solid state reactions have been developed to prepare finer titanium diboride in large quantity. An example of solid state reaction is the borothermic reduction, which can be illustrated by the following reactions: (1) 2 TiO₂ + B₄C + 3C → 2 TiB₂ + 4 CO (2) TiO₂ + 3NaBH₄ → TiB₂ + 2Na_(g,l) + NaBO₂ + 6H_2(g) The first synthesis route (1), however, cannot produce nanosized powders. Nanocrystalline (5–100 nm) TiB₂ was synthesized using the reaction (2) or the following techniques: * Solution phase reaction of NaBH₄ and TiCl₄, followed by annealing the amorphous precursor obtained at 900–1100 °C. *Mechanical alloying of a mixture of elemental Ti and B powders. *Self-propagating high temperature synthesis process involving addition of varying amounts of NaCl. *Milling assisted Self-propagating high temperature synthesis (MA-SHS). *Solvothermal reaction in benzene of metallic sodium with amorphous boron powder and TiCl₄ at 400 °C: ::TiCl₄ + 2 B + 4 Na → TiB₂ + 4 NaCl Many TiB₂ applications are inhibited by economic factors, particularly the costs of densifying a high melting point material - the melting point is about 2970 °C, and, thanks to a layer of titanium dioxide that forms on the surface of the particles of a powder, it is very resistant to

sintering Clinker nodules produced by sintering Sintering or frittage is the process of compacting and forming a solid mass of material by pressure or heat without melting it to the point of liquefaction. Sintering happens as part of a manufacturing ...

. Admixture of about 10%

facilitates the sintering,Titanium diboride sintered body with silicon nitride as a sintering aid and a method for manufacture thereof
/ref> though sintering without silicon nitride has been demonstrated as well. Thin films of TiB₂ can be produced by several techniques. The

electroplating Electroplating, also known as electrochemical deposition or electrodeposition, is a process for producing a metal coating on a solid substrate through the redox, reduction of cations of that metal by means of a direct current, direct electric cur ...

of TiB₂ layers possess two main advantages compared with

physical vapor deposition Physical vapor deposition (PVD), sometimes called physical vapor transport (PVT), describes a variety of vacuum deposition methods which can be used to produce thin films and coatings on substrates including metals, ceramics, glass, and poly ...

chemical vapor deposition Chemical vapor deposition (CVD) is a vacuum deposition method used to produce high quality, and high-performance, solid materials. The process is often used in the semiconductor industry to produce thin films. In typical CVD, the wafer (subst ...

: the growing rate of the layer is 200 times higher (up to 5 μm/s) and the inconveniences of covering complex shaped products are dramatically reduced.

Potential applications

Current use of TiB₂ appears to be limited to specialized applications in such areas as impact resistant

armor Armour (British English) or armor (American English; see spelling differences) is a covering used to protect an object, individual, or vehicle from physical injury or damage, especially direct contact weapons or projectiles during combat, or ...

cutting tool In the context of machining, a cutting tool or cutter is typically a hardened metal tool that is used to cut, shape, and remove material from a workpiece by means of machining tools as well as abrasive tools by way of shear deformation. The majori ...

crucible A crucible is a ceramic or metal container in which metals or other substances may be melted or subjected to very high temperatures. While crucibles were historically usually made from clay, they can be made from any material that withstands te ...

s, neutron absorbers and wear resistant coatings. TiB₂ is extensively used for evaporation boats for vapour coating of

aluminium Aluminium (aluminum in AmE, American and CanE, Canadian English) is a chemical element with the Symbol (chemistry), symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately o ...

. It is an attractive material for the aluminium industry as an inoculant to refine the

grain size Grain size (or particle size) is the diameter of individual grains of sediment, or the lithified particles in clastic rocks. The term may also be applied to other granular materials. This is different from the crystallite size, which refe ...

when

casting Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a ''casting'', which is ejected ...

aluminium alloy An aluminium alloy (or aluminum alloy; see spelling differences) is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two princip ...

s, because of its wettability by and low solubility in molten aluminium and good electrical conductivity.

Thin film A thin film is a layer of material ranging from fractions of a nanometer ( monolayer) to several micrometers in thickness. The controlled synthesis of materials as thin films (a process referred to as deposition) is a fundamental step in many a ...

s of TiB₂ can be used to provide wear and

corrosion Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials (usually a metal) by chemical or electrochemical reaction with their environment. Corrosion engi ...

resistance to a cheap and/or tough substrate.

References

Compare

* Magnesium diboride

Physical properties

Exceptional hardness at extreme temperature

Advantages over other borides

Other advantages

Drawbacks

Chemical properties

Production

Potential applications

References

Compare

See also