Timoshenko–Ehrenfest Beam Theory

The Timoshenko–Ehrenfest beam theory was developed by Stephen Timoshenko and Paul EhrenfestIsaac Elishakoff (2020) "Who developed the so-called Timoshenko beam theory?", ''Mathematics and Mechanics of Solids'' 25(1): 97–116 early in the 20th century.Timoshenko, S. P. (1921) "LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars", ''The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science'' 41(245): 744–746 Timoshenko, S. P. (1922) "X. On the transverse vibrations of bars of uniform cross-section", ''The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science'' 43(253): 125–131 The model takes into account shear deformation and rotational bending effects, making it suitable for describing the behaviour of thick beams, sandwich composite beams, or beams subject to high-frequency excitation when the wavelength approaches the thickness of the beam. The resulting equation is of fourth order but, unlike Euler–Bernoulli beam theory, there is also a second-order partial derivative present. Physically, taking into account the added mechanisms of deformation effectively lowers the stiffness of the beam, while the result is a larger deflection under a static load and lower predicted eigenfrequencies for a given set of boundary conditions. The latter effect is more noticeable for higher frequencies as the wavelength becomes shorter (in principle comparable to the height of the beam or shorter), and thus the distance between opposing shear forces decreases.

Rotary inertia effect was introduced by Bresse and Rayleigh.

If the shear modulus of the beam material approaches infinity—and thus the beam becomes rigid in shear—and if rotational inertia effects are neglected, Timoshenko beam theory converges towards Euler–Bernoulli beam theory.

Quasistatic Timoshenko beam

In static Timoshenko beam theory without axial effects, the displacements of the beam are assumed to be given by
:$u_x(x,y,z) = -z~\varphi(x) ~;~~ u_y(x,y,z) = 0 ~;~~ u_z(x,y) = w(x)$
where $(x,y,z)$ are the coordinates of a point in the beam, $u_x, u_y, u_z$ are the components of the displacement vector in the three coordinate directions, $\varphi$ is the angle of rotation of the normal to the mid-surface of the beam, and $w$ is the displacement of the mid-surface in the $z$-direction.

The governing equations are the following coupled system of ordinary differential equations:
:$\begin & \frac\left(EI\frac\right) = q(x) \\ & \frac = \varphi - \frac \frac\left(EI\frac\right). \end$

The Timoshenko beam theory for the static case is equivalent to the Euler–Bernoulli theory when the last term above is neglected, an approximation that is valid when
:$\frac \ll 1$
where
* $L$ is the length of the beam.
* $A$ is the cross section area.
* $E$ is the elastic modulus.
* $G$ is the shear modulus.
* $I$ is the second moment of area.
* $\kappa$, called the Timoshenko shear coefficient, depends on the geometry. Normally, $\kappa = 5/6$ for a rectangular section.
* $q(x)$ is a distributed load (force per length).
* $w$ is the displacement of the mid-surface in the $z$-direction.
* $\varphi$ is the angle of rotation of the normal to the mid-surface of the beam.

Combining the two equations gives, for a homogeneous beam of constant cross-section,
:$EI~\cfrac = q(x) - \cfrac~\cfrac$

The bending moment $M_$ and the shear force $Q_x$ in the beam are related to the displacement $w$ and the rotation $\varphi$. These relations, for a linear elastic Timoshenko beam, are:
:$M_ = -EI~\frac \quad \text \quad Q_ = \kappa~AG~\left(-\varphi + \frac\right) \,.$

:

Boundary conditions

The two equations that describe the deformation of a Timoshenko beam have to be augmented with boundary conditions if they are to be solved. Four boundary conditions are needed for the problem to be well-posed. Typical boundary conditions are:
* Simply supported beams: The displacement $w$ is zero at the locations of the two supports. The bending moment $M_$ applied to the beam also has to be specified. The rotation $\varphi$ and the transverse shear force $Q_x$ are not specified.
* Clamped beams: The displacement $w$ and the rotation $\varphi$ are specified to be zero at the clamped end. If one end is free, shear force $Q_x$ and bending moment $M_$ have to be specified at that end.

Strain energy of a Timoshenko beam

The strain energy of a Timoshenko beam is expressed as a sum of strain energy due to bending and shear. Both these components are quadratic in their variables. The strain energy function of a Timoshenko beam can be written as,
:$W=\int_ \frac\left(\frac\right)^2+\frac\left(\varphi-\frac\right)^2$

Example: Cantilever beam

For a cantilever beam, one boundary is clamped while the other is free. Let us use a right handed coordinate system where the $x$ direction is positive towards right and the $z$ direction is positive upward. Following normal convention, we assume that positive forces act in the positive directions of the $x$ and $z$ axes and positive moments act in the clockwise direction. We also assume that the sign convention of the stress resultants ($M_$ and $Q_x$) is such that positive bending moments compress the material at the bottom of the beam (lower $z$ coordinates) and positive shear forces rotate the beam in a counterclockwise direction.

Let us assume that the clamped end is at $x=L$ and the free end is at $x=0$. If a point load $P$ is applied to the free end in the positive $z$ direction, a free body diagram of the beam gives us
:$-Px - M_ = 0 \implies M_ = -Px$
and
:$P + Q_x = 0 \implies Q_x = -P\,.$
Therefore, from the expressions for the bending moment and shear force, we have
:$Px = EI\,\frac \qquad \text \qquad -P = \kappa AG\left(-\varphi + \frac\right) \,.$
Integration of the first equation, and application of the boundary condition $\varphi = 0$ at $x = L$, leads to
:$\varphi(x) = -\frac\,(L^2-x^2) \,.$
The second equation can then be written as
:$\frac = -\frac - \frac\,(L^2-x^2)\,.$
Integration and application of the boundary condition $w = 0$ at $x = L$ gives
:$w(x) = \frac - \frac\,\left(L^2-\frac\right) + \frac \,.$
The axial stress is given by
:$\sigma_(x,z) = E\,\varepsilon_ = -E\,z\,\frac = -\frac = \frac \,.$

Dynamic Timoshenko beam

In Timoshenko beam theory without axial effects, the displacements of the beam are assumed to be given by
:$u_x(x,y,z,t) = -z~\varphi(x,t) ~;~~ u_y(x,y,z,t) = 0 ~;~~ u_z(x,y,z,t) = w(x,t)$
where $(x,y,z)$ are the coordinates of a point in the beam, $u_x, u_y, u_z$ are the components of the displacement vector in the three coordinate directions, $\varphi$ is the angle of rotation of the normal to the mid-surface of the beam, and $w$ is the displacement of the mid-surface in the $z$-direction.

Starting from the above assumption, the Timoshenko beam theory, allowing for vibrations, may be described with the coupled linear partial differential equations:

:
\rho A\frac - q(x,t) = \frac\left \kappa AG \left(\frac-\varphi\right)\right

:$\rho I\frac = \frac\left(EI\frac\right)+\kappa AG\left(\frac-\varphi\right)$

where the dependent variables are $w(x,t)$, the translational displacement of the beam, and $\varphi(x,t)$, the angular displacement. Note that unlike the Euler–Bernoulli theory, the angular deflection is another variable and not approximated by the slope of the deflection. Also,
* $\rho$ is the density of the beam material (but not the linear density).
* $A$ is the cross section area.
* $E$ is the elastic modulus.
* $G$ is the shear modulus.
* $I$ is the second moment of area.
* $\kappa$, called the Timoshenko shear coefficient, depends on the geometry. Normally, $\kappa = 5/6$ for a rectangular section.
* $q(x,t)$ is a distributed load (force per length).
* $m := \rho A$
* $J := \rho I$
* $w$ is the displacement of the mid-surface in the $z$-direction.
* $\varphi$ is the angle of rotation of the normal to the mid-surface of the beam.

These parameters are not necessarily constants.

For a linear elastic, isotropic, homogeneous beam of constant cross-section these two equations can be combined to giveThomson, W. T., 1981, ''Theory of Vibration with Applications'', second edition. Prentice-Hall, New Jersey.Rosinger, H. E. and Ritchie, I. G., 1977, ''On Timoshenko's correction for shear in vibrating isotropic beams'', J. Phys. D: Appl. Phys., vol. 10, pp. 1461-1466.
:$EI~\cfrac + m~\cfrac - \left(J + \cfrac\right)\cfrac + \cfrac~\cfrac = q(x,t) + \cfrac~\cfrac - \cfrac~\cfrac$
:
However, it can easily be shown that this equation is incorrect. Consider the case where q is constant and does not depend on x or t, combined with the presence of a small damping all time derivatives will go to zero when t goes to infinity. The shear terms are not present in this situation, resulting in the Euler-Bernoulli beam theory, where shear deformation is neglected.

The Timoshenko equation predicts a critical frequency
$\omega_C=2 \pi f_c=\sqrt.$
For normal modes the Timoshenko equation can be solved. Being a fourth order equation, there are four independent solutions, two oscillatory and two evanescent for frequencies below $f_c$.
For frequencies larger than $f_c$ all solutions are oscillatory and, as consequence, a second spectrum appears.

Axial effects

If the displacements of the beam are given by
:$u_x(x,y,z,t) = u_0(x,t)-z~\varphi(x,t) ~;~~ u_y(x,y,z,t) = 0 ~;~~ u_z(x,y,z,t) = w(x,t)$
where $u_0$ is an additional displacement in the $x$-direction, then the governing equations of a Timoshenko beam take the form
:
\begin
m \frac & = \frac\left \kappa AG \left(\frac-\varphi\right)\right+ q(x,t) \\
J \frac & = N(x,t)~\frac + \frac\left(EI\frac\right)+\kappa AG\left(\frac-\varphi\right)
\end

where $J = \rho I$ and $N(x,t)$ is an externally applied axial force. Any external axial force is balanced by the stress resultant
:$N_(x,t) = \int_^ \sigma_~dz$
where $\sigma_$ is the axial stress and the thickness of the beam has been assumed to be $2h$.

The combined beam equation with axial force effects included is
:$EI~\cfrac + N~\cfrac + m~\frac - \left(J+\cfrac\right)~\cfrac + \cfrac~\cfrac = q + \cfrac~\frac - \cfrac~\frac$

Damping

If, in addition to axial forces, we assume a damping force that is proportional to the velocity with the form
:$\eta(x)~\cfrac$
the coupled governing equations for a Timoshenko beam take the form
:
m \frac + \eta(x)~\cfrac = \frac\left \kappa AG \left(\frac-\varphi\right)\right+ q(x,t)

:$J \frac = N\frac + \frac\left(EI\frac\right)+\kappa AG\left(\frac-\varphi\right)$
and the combined equation becomes
:$\begin EI~\cfrac & + N~\cfrac + m~\frac - \left(J+\cfrac\right)~\cfrac + \cfrac~\cfrac + \cfrac~\cfrac \\ & -\cfrac~\cfrac\left(\eta(x)\cfrac\right) + \eta(x)\cfrac = q + \cfrac~\frac - \cfrac~\frac \end$

A caveat to this Ansatz damping force (resembling viscosity) is that, whereas viscosity leads to a frequency-dependent and amplitude-independent damping rate of beam oscillations, the empirically measured damping rates are frequency-insensitive, but depend on the amplitude of beam deflection.

Shear coefficient

Determining the shear coefficient is not straightforward (nor are the determined values widely accepted, i.e. there's more than one answer); generally it must satisfy:
:$\int_A \tau dA = \kappa A G (\varphi - \frac)$ .

The shear coefficient depends on Poisson's ratio. The attempts to provide precise expressions were made by many scientists, including Stephen Timoshenko, Raymond D. Mindlin, G. R. Cowper,Cowper, G. R., 1966, "The Shear Coefficient in Timoshenko’s Beam Theory", J. Appl. Mech., Vol. 33, No.2, pp. 335–340. N. G. Stephen, J. R. Hutchinson etc. (see also the derivation of the Timoshenko beam theory as a refined beam theory based on the variational-asymptotic method in the book by Khanh C. Le leading to different shear coefficients in the static and dynamic cases). In engineering practice, the expressions by Stephen Timoshenko are sufficient in most cases. In 1975 Kaneko published a review of studies of the shear coefficient. More recently, experimental data shows that the shear coefficient is underestimated."On the Accuracy of the Timoshenko Beam Theory Above the Critical Frequency: Best Shear Coefficient", J. A. Franco-Villafañe and R. A. Méndez-Sánchez, Journal of Mechanics, January 2016, pp. 1–4. DOI: 10.1017/jmech.2015.104.

Corrective shear coefficients for homogeneous isotropic beam according to Cowper - selection.

where $\nu$ is Poisson's ratio.

See also

* Plate theory
* Sandwich theory

References

{{DEFAULTSORT:Timoshenko-Ehrenfest beam theory
Beam theory
Continuum mechanics
Structural analysis