The Thames Trader was a range of

truck A truck or lorry is a motor vehicle designed to transport freight, carry specialized payloads, or perform other utilitarian work. Trucks vary greatly in size, power, and configuration, but the vast majority feature body-on-frame construct ...

s manufactured by

Ford UK Ford Motor Company Limited,The Ford 'companies' or corporate entities referred to in this article are: * Ford Motor Company, Dearborn, Michigan, USA, incorporated 16 June 1903 * Ford Motor Company Limited, incorporated 7 December 1928. Current ...

built between 1957 and 1965.

Forward Control models

Design

The distinctive cab design, which sets it apart from other British commercial vehicles, was a forward-control (or semi-forward control) design and the Thames Trader model covered a much wider weight range than the existing normal control ET Thames model or the earlier forward control 7V model. Both these earlier models had been based on Ford of America designs; the new Thames Trader was the first heavy commercial to be designed by Ford of Britain (although looking at the headlight surrounds suggests a family resemblance to the American Ford C series truck of the mid 1950s).

Mechanicals and wheelbase types

The Thames Trader model range covered weights from 2 to 7 tons, powered by either petrol or diesel engines in four- or six-cylinder guises. The lower-weight vehicles were available with 118- and 138-inch wheelbases, the heavy weight vehicle with 138-, 152- and 160-inch wheelbases; there was also a 108-inch tipper wheelbase. In addition there was a low-frame chassis model – typically used for furniture van bodywork. The engines were all from the Dagenham engine family, originally developed for the Fordson tractor in 1952 but updated to Mark 2 specifications for the Thames Trader. All have a stroke; the petrol engines received a bore and the diesels . The four-cylinder petrol engine displaces and initially produced at 2,800 rpm, while the six-cylinder petrol is of and produces at 2,800 rpm. The smaller diesel is of and produces at 2,500 rpm, the 6D engine displaces and produces at 2,500 rpm. The engines were mounted at a 45° slant to allow for more space above.

Mk2

A Mk 2 version was introduced in mid-1962. Externally it is very easy to differentiate between Mk1 and Mk2 versions; the Mk1 has the words THAMES TRADER in red on a chrome strip along the bottom of the bonnet opening and the white painted grill between the headlights has a vertical divider with a red circular badge with 4 stars, whereas the Mk2 has just the word THAMES under the bonnet, and TRADER in white letters spaced out between the headlights replacing the divider and badge. The Mk2 Diesel engined variants had either a 4D or 6D chrome badge on each front wing, on the Mk1 it was a squarish chrome badge with either a red painted 4, 6, 4D, or 6D to indicate the engine configuration. The lower edge of the badge had a horizontal chrome strip running the length of the lower part of the wing.

Normal Control models

Ford commenced production of the Thames Trader NC at the Dagenham factory in England in early 1962.www.griffintrust.org.uk
Retrieved 15 November 2016 It used the cabin developed by Ford Germany for their slow-selling Ford Köln truck, which had been discontinued in 1961. The NC designation indicated "normal control",www.fomcc.de
Retrieved 15 November 2016 as opposed to " forward control". The lighter duty Thames NC was initially fitted only with the four-cylinder petrol or diesel engine, now producing respectively. The first models ranged between capacity and replaced the earlier, semi-forward control Thames Trader of the same weights. After the discontinuation of the Thames brand in 1965 the NC was re-designated as the K Series. Ford Europe did not return to the market segment for normal control heavy-duty vans until 1973 with the Ford A-Series, which was based on the smaller

Ford Transit The Ford Transit is a family of light commercial vehicles manufactured by the Ford Motor Company since 1965, primarily as a panel van, cargo van, but also available in other configurations including a large passenger van (marketed as the Ford ...

London Transport use

London Transport ordered five double decker buses based on the Thames Trader for special duties, taking cyclists through the Dartford Tunnel. These had a lower deck purpose built for carrying bicycles, with the upper deck for cyclists. Unusually, these buses had their stairwell several feet above the level of the road, accessible by a ladder. The service was later dropped in 1965, owing to lack of cycle traffic and possibly the design.

Gallery

File:1959 Thames trader dropside lorry (PPM 927), 2009 HCVS London to Brighton run.jpg, 1959 Thames Trader File:Thames trader (5604960415).jpg, Thames Trader Mark 2 File:Thames Trader registered October 1964 3600cc sic DVLA.JPG, 1964 Thames Trader NC

References

External links

Ford Thames Trader at Heritage Machines

Thames Trader at National Road Transport Hall of Fame (Australia)
{{Early European Ford commercial vehicles Thames Trader Ford trucks Vehicles introduced in 1957 Rear-wheel-drive vehicles