HOME

TheInfoList



OR:

Taylorcraft Aviation is an
airplane manufacturer An aerospace manufacturer is a company or individual involved in the various aspects of designing, building, testing, selling, and maintaining aircraft, aircraft parts, missiles, rockets, or spacecraft. Aerospace is a high technology ind ...
that has been producing aircraft for more than 70 years in several locations. The company builds small single-engined airplanes. The Taylorcraft design is a conventional layout: high-wing, fabric-covered, two-seat aircraft. The basic design has remained unchanged since 1936, and this design is sold as a personal sport aircraft today.


History

The designer,
Clarence Gilbert Taylor Clarence Gilbert Taylor (September 8, 1898 – March 29, 1988) was an early aviation entrepreneur and co-founder of the Taylor Brothers Aircraft Corporation (later named the Piper Aircraft Corporation) in Rochester, New York. He was the designer ...
, a self-taught aeronautical engineer born in Rochester, New York, to parents who immigrated from England, can be called the father of private aviation in America, as he designed the original
Taylor Cub The Taylor Cub was originally designed by C. Gilbert Taylor as a small, light and simple utility aircraft, evolved from the Arrowing Chummy. It is the forefather of the popular Piper J-3 Cub, and total production of the Cub series was 23,512 ...
in 1931 at
Bradford, Pennsylvania Bradford is a city in McKean County, Pennsylvania. It is located close to the border with New York state and approximately south of Buffalo, New York. Bradford is the principal city in the Bradford, PA Micropolitan Statistical Area. The populat ...
. Taylor, along with his brother Gordon, formed Taylor Brothers Aircraft Corporation - slogan; "Buy Your Airplane Taylor Made" - in
Rochester, New York Rochester () is a city in the U.S. state of New York, the seat of Monroe County, and the fourth-most populous in the state after New York City, Buffalo, and Yonkers, with a population of 211,328 at the 2020 United States census. Located i ...
in 1926, offering a two-seat high-winged monoplane called the "Chummy", priced at $4,000. The Chummy failed to sell, and after Gordon died flying another Taylor design in 1928, Clarence moved to
Bradford, Pennsylvania Bradford is a city in McKean County, Pennsylvania. It is located close to the border with New York state and approximately south of Buffalo, New York. Bradford is the principal city in the Bradford, PA Micropolitan Statistical Area. The populat ...
, where the townsfolk had offered him a new factory at the local airfield plus $50,000 to invest in the company. One of the investors was William Thomas Piper, who had made his money from
oil well An oil well is a drillhole boring in Earth that is designed to bring petroleum oil hydrocarbons to the surface. Usually some natural gas is released as associated petroleum gas along with the oil. A well that is designed to produce only gas ma ...
s.Aeroplane Monthly - April 1987 issue - ''For Business And Pleasure'' article, P. 188 Taylor vowed to build a personal aircraft superior to the Cub so he formed his own company in 1935 as Taylor-Young Airplane Company, renamed Taylorcraft Aviation Corporation in 1939. Piper bought out Taylor's share in Taylor Aircraft which was later renamed Piper Aircraft. In 1936 Taylor rented facilities at
Pittsburgh-Butler Airport Pittsburgh-Butler Regional Airport , also known as the Butler County Airport or K. W. Scholter Field, is a public airport southwest of the central business district of Butler, the county seat of Butler County, Pennsylvania, United States. The ...
and first manufactured the "Taylorcraft" plane. That summer, the firm moved to
Alliance, Ohio Alliance is a city in eastern Stark County, Ohio, United States. With a small district lying in adjacent Mahoning County, the city is approximately northeast of Canton, southwest of Youngstown and southeast of Cleveland. The population was 2 ...
when the city offered the use of the former Hess-Argo biplane (28 built between 1929 and 1932) factory rent free for a period of six months with an option to buy for $48,000. During World War II, light aircraft were used for training, liaison, and observation purposes. Taylorcraft's DCO-65 model was called the
L-2 L2, L2, L02, L II, L.2 or L-2 may refer to: Astronomy * L2 point, second Lagrangian point in a two body orbiting system * L2 Puppis, star which is also known as HD 56096 * Advanced Telescope for High Energy Astrophysics, a proposed X-ray telesc ...
by the
United States Army Air Forces The United States Army Air Forces (USAAF or AAF) was the major land-based aerial warfare service component of the United States Army and ''de facto'' aerial warfare service branch of the United States during and immediately after World War II ...
and served alongside the military version of the Piper Cub. Taylorcraft Aeroplanes Ltd., a subsidiary based in
Thurmaston Thurmaston is a village and civil parish in Leicestershire, England, located within the Borough of Charnwood. At the 2011 census, it had a population of 9,668. It is situated four miles north of the city centre of Leicester and lies just o ...
, Leicestershire,
England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe ...
, developed the Taylorcraft Model 'D' and the Auster Mk. I through Mk. V, which became the backbone aircraft of the British AOP (
Air Observation Post Air Observation Post (AOP) is an aeroplane or helicopter used in the role of artillery spotter by the British Army and Commonwealth forces. In this role, either the pilot of the aircraft or another crew member acts as an observer watching for ta ...
) and the three Canadian AOP squadrons, No. 664 Squadron RCAF, No. 665 Squadron RCAF, and
No. 666 Squadron RCAF No. 666 Squadron RCAF was originally an RCAF Air Observation Post (AOP) squadron formed during the Second World War. It was manned principally by Royal Canadian Artillery (RCA) and Royal Canadian Air Force (RCAF) personnel.National Archives of Cana ...
.


Taylorcraft Inc

In the fall of 1946 production was halted following a fire in the Taylorcraft factory at
Alliance, Ohio Alliance is a city in eastern Stark County, Ohio, United States. With a small district lying in adjacent Mahoning County, the city is approximately northeast of Canton, southwest of Youngstown and southeast of Cleveland. The population was 2 ...
and the company went into bankruptcy. In 1949 C.G. Taylor bought the assets from the former company, and started a new company ''Taylorcraft, Inc.'' at Conway, Pennsylvania. The company restarted production of the BC-12D Traveller and the BC-12-85D Sportsman. The company produced few aircraft; the type certificates were sold to Univair and production was halted.


Taylorcraft Aviation Corporation

In 1971 the Taylorcraft Aviation Corporation, owned by Charles Feris put the Model 19 back into production as the F-19 Sportsman and added the F-21 model. Feris died in 1976 and the production continued at a low rate until 1985. Charles Ruckle bought the company in 1985 and he moved the operation to
Lock Haven, Pennsylvania Lock Haven is the county seat of Clinton County, in the U.S. state of Pennsylvania. Located near the confluence of the West Branch Susquehanna River and Bald Eagle Creek, it is the principal city of the Lock Haven Micropolitan Statistical Area ...
, where it produced 16 aircraft before it went bankrupt in 1986 and the company was offered for sale.


Aircraft Acquisition Corporation

The West Virginia-based company was set up to put one new model in certification, and develop a distribution network. The assets were sold to key investor East Kent Capitol.


2008 Repossession

On February 21, 2008, the company was repossessed by its former owner, Taylorcraft 2000 LLC. The previous owners had taken orders for new struts for existing aircraft to alleviate a repetitive inspection
Airworthiness Directive An Airworthiness Directive (commonly abbreviated as AD) is a notification to owners and operators of certified aircraft that a known safety deficiency with a particular model of aircraft, engine, avionics or other system exists and must be correct ...
and is delivering struts to customers. The design's type certificates, drawings, jigs, templates and parts have been put up for sale.


Aircraft


References


Citations


Bibliography

* * * Peek, Chet ''The Taylorcraft Story'', Aviation Heritage Library Series/Sunshine House, Inc., Terre Haute, IN. 1993 * Fromow, Lt-Col. D.L. ''Canada's Flying Gunners'', Air Observation Post Pilot's Association, Ottawa, Canada. 2002. * Simpson, R.W ''Airlife's General Aviation'', Airlife Publishing, England, 1991.


External links


Taylorcraft factory website

"The Taylorcraft Story" by Chet Peek - Book covering the history of C.G. Taylor's aircraft designs
{{Taylorcraft aircraft Aircraft manufacturers of the United States Brownsville, Texas Vehicle manufacturing companies established in 1935 Manufacturing companies based in Texas Companies based in Texas 1935 establishments in Pennsylvania