Stressed syllable

In linguistics, and particularly phonology, stress or accent is the relative emphasis or prominence given to a certain syllable in a word or to a certain word in a phrase or sentence. That emphasis is typically caused by such properties as increased loudness and vowel length, full articulation of the vowel, and changes in tone. The terms ''stress'' and ''accent'' are often used synonymously in that context but are sometimes distinguished. For example, when emphasis is produced through pitch alone, it is called ''pitch accent'', and when produced through length alone, it is called ''quantitative accent''. When caused by a combination of various intensified properties, it is called ''stress accent'' or ''dynamic accent''; English uses what is called ''variable stress accent''.

Since stress can be realised through a wide range of phonetic properties, such as loudness, vowel length, and pitch (which are also used for other linguistic functions), it is difficult to define stress solely phonetically.

The stress placed on syllables within words is called word stress. Some languages have ''fixed stress'', meaning that the stress on virtually any multisyllable word falls on a particular syllable, such as the penultimate (e.g. Polish) or the first (e.g. Finnish). Other languages, like English and Russian, have ''lexical stress'', where the position of stress in a word is not predictable in that way but lexically encoded. Sometimes more than one level of stress, such as ''primary stress'' and '' secondary stress'', may be identified.

Stress is not necessarily a feature of all languages: some, such as French and Mandarin Chinese, are sometimes analyzed as lacking lexical stress entirely.

The stress placed on words within sentences is called sentence stress or prosodic stress. That is one of the three components of prosody, along with rhythm and intonation. It includes phrasal stress (the default emphasis of certain words within phrases or clauses), and contrastive stress (used to highlight an item, a word or part of a word, that is given particular focus).

Phonetic realization

There are various ways in which stress manifests itself in the speech stream, and they depend to some extent on which language is being spoken. Stressed syllables are often louder than non-stressed syllables, and they may have a higher or lower pitch. They may also sometimes be pronounced longer. There are sometimes differences in place or manner of articulation. In particular, vowels in unstressed syllables may have a more central (or " neutral") articulation, and those in stressed syllables have a more peripheral articulation. Stress may be realized to varying degrees on different words in a sentence; sometimes, the difference is minimal between the acoustic signals of stressed and those of unstressed syllables.

Those particular distinguishing features of stress, or types of prominence in which particular features are dominant, are sometimes referred to as particular types of accent: ''dynamic accent'' in the case of loudness, ''pitch accent'' in the case of pitch (although that term usually has more specialized meanings), ''quantitative accent'' in the case of length, and ''qualitative accent'' in the case of differences in articulation. They can be compared to the various types of accents in music theory. In some contexts, the term ''stress'' or ''stress accent'' specifically means dynamic accent (or as an antonym to ''pitch accent'' in its various meanings).

A prominent syllable or word is said to be ''accented'' or ''tonic''; the latter term does not imply that it carries phonemic tone. Other syllables or words are said to be ''unaccented'' or ''atonic''. Syllables are frequently said to be in ''pretonic'' or ''post-tonic'' position, and certain phonological rules apply specifically to such positions. For instance, in American English, /t/ and /d/ are flapped in post-tonic position.

In Mandarin Chinese, which is a tonal language, stressed syllables have been found to have tones that are realized with a relatively large swing in fundamental frequency, and unstressed syllables typically have smaller swings. (See also Stress in Standard Chinese.)

Stressed syllables are often perceived as being more forceful than non-stressed syllables.

Word stress

Word stress, or sometimes ''lexical stress'', is the stress placed on a given syllable in a word. The position of word stress in a word may depend on certain general rules applicable in the language or dialect in question, but in other languages, it must be learned for each word, as it is largely unpredictable, for example in English. In some cases, classes of words in a language differ in their stress properties; for example, loanwords into a language with ''fixed'' stress may preserve stress placement from the source language, or the special pattern for Turkish placenames.

Non-phonemic stress

In some languages, the placement of stress can be determined by rules. It is thus not a phonemic property of the word, because it can always be predicted by applying the rules.

Languages in which the position of the stress can usually be predicted by a simple rule are said to have ''fixed stress''. For example, in Czech, Finnish, Icelandic, Hungarian and Latvian, the stress almost always comes on the first syllable of a word. In Armenian the stress is on the last syllable of a word. In Quechua, Esperanto, and Polish, the stress is almost always on the penult (second-last syllable). In Macedonian, it is on the antepenult (third-last syllable).

Other languages have stress placed on different syllables but in a predictable way, as in Classical Arabic and Latin, where stress is conditioned by the weight of particular syllables. They are said to have a regular stress rule.

Statements about the position of stress are sometimes affected by the fact that when a word is spoken in isolation, prosodic factors (see below) come into play, which do not apply when the word is spoken normally within a sentence. French words are sometimes said to be stressed on the final syllable, but that can be attributed to the prosodic stress, which is placed on the last syllable (unless it is a schwa in which case the stress is placed on the second-last syllable) of any string of words in that language. Thus, it is on the last syllable of a word analyzed in isolation. The situation is similar in Mandarin Chinese. French and Georgian (and, according to some authors, Mandarin Chinese) can be considered to have no real lexical stress.

Phonemic stress

With some exceptions above, languages such as Germanic languages, Romance languages, the East and South Slavic languages, Lithuanian, Greek, as well as others, in which the position of stress in a word is not fully predictable, are said to have ''phonemic stress''. Stress in these languages is usually truly lexical and must be memorized as part of the pronunciation of an individual word. In some languages, such as Spanish, Portuguese, Catalan, Lakota and, to some extent, Italian, stress is even represented in writing using diacritical marks, for example in the Spanish words and . Sometimes, stress is fixed for all forms of a particular word, or it can fall on different syllables in different inflections of the same word.

In such languages with phonemic stress, the position of stress can serve to distinguish otherwise identical words. For example, the English words ''insight'' () and ''incite'' () are distinguished in pronunciation only by the fact that the stress falls on the first syllable in the former and on the second syllable in the latter. Examples from other languages include German ( vs. ); and Italian ( vs. ).

In many languages with lexical stress, it is connected with alternations in vowels and/or consonants, which means that vowel quality differs by whether vowels are stressed or unstressed. There may also be limitations on certain phonemes in the language in which stress determines whether they are allowed to occur in a particular syllable or not. That is the case with most examples in English and occurs systematically in Russian, such as (, ) vs. (, ); and in Portuguese, such as the triplet (, ), (, ), (, ).

Dialects of the same language may have different stress placement. For instance, the English word ''laboratory'' is stressed on the second syllable in British English (''labóratory'' often pronounced "labóratry", the second ''o'' being silent), but the first syllable in American English, with a secondary stress on the "tor" syllable (''láboratory'' often pronounced "lábratory"). The Spanish word is stressed on the first syllable in Spain () but on the second syllable in the Americas (). The Portuguese words for Madagascar and the continent Oceania are stressed on the third syllable in European Portuguese ( and ), but on the fourth syllable in Brazilian Portuguese ( and ).

Compounds

With very few exceptions, English compound words are stressed on their first component. Even the exceptions, such as ''mankínd'', are instead often stressed on the first component by some people or in some kinds of English. The same components as those of a compound word are sometimes used in a descriptive phrase with a different meaning and with stress on both words, but that descriptive phrase is then not usually considered a compound: ''bláck bírd'' (any bird that is black) and ''bláckbird'' (a specific bird species) and ''páper bág'' (a bag made of paper) and ''páper bag'' (very rarely used for a bag for carrying newspapers but often also used for a bag made of paper).

Levels of stress

Some languages are described as having both ''primary stress'' and ''secondary stress''. A syllable with secondary stress is stressed relative to unstressed syllables but not as strongly as a syllable with primary stress. As with primary stress, the position of secondary stress may be more or less predictable depending on language. In English, it is not fully predictable, but the different secondary stress of the words ''organization'' and ''accumulation'' (on the first and second syllable, respectively) is predictable due to the same stress of the verbs ''órganize'' and ''accúmulate''. In some analyses, for example the one found in Chomsky and Halle's '' The Sound Pattern of English'', English has been described as having four levels of stress: primary, secondary, tertiary, and quaternary, but the treatments often disagree with one another.

Peter Ladefoged and other phoneticians have noted that it is possible to describe English with only one degree of stress, as long as prosody is recognized and unstressed syllables are phonemically distinguished for vowel reduction.Ladefoged (1975 ''etc.'') '' A course in phonetics'' § 5.4; (1980) ''Preliminaries to linguistic phonetics'' p 83 They find that the multiple levels posited for English, whether ''primary–secondary'' or ''primary–secondary–tertiary'', are not phonetic stress (let alone phonemic), and that the supposed secondary/tertiary stress is not characterized by the increase in respiratory activity associated with primary/secondary stress in English and other languages. (For further detail see Stress and vowel reduction in English.)

Prosodic stress

''Prosodic stress'', or ''sentence stress'', refers to stress patterns that apply at a higher level than the individual word – namely within a prosodic unit. It may involve a certain natural stress pattern characteristic of a given language, but may also involve the placing of emphasis on particular words because of their relative importance (contrastive stress).

An example of a natural prosodic stress pattern is that described for French above; stress is placed on the final syllable of a string of words (or if that is a schwa, the next-to-final syllable). A similar pattern is found in English (see above): the traditional distinction between (lexical) primary and secondary stress is replaced partly by a prosodic rule stating that the final stressed syllable in a phrase is given additional stress. (A word spoken alone becomes such a phrase, hence such prosodic stress may appear to be lexical if the pronunciation of words is analyzed in a standalone context rather than within phrases.)

Another type of prosodic stress pattern is ''quantity sensitivity'' – in some languages additional stress tends to be placed on syllables that are longer ( moraically heavy).

Prosodic stress is also often used pragmatically to emphasize (focus attention on) particular words or the ideas associated with them. Doing this can change or clarify the meaning of a sentence; for example:

As in the examples above, stress is normally transcribed as italics in printed text or underlining in handwriting.

In English, stress is most dramatically realized on focused or accented words. For instance, consider the dialogue

In it, the stress-related acoustic differences between the syllables of ''tomorrow'' would be small compared to the differences between the syllables of ''dinner'', the emphasized word. In these emphasized words, stressed syllables such as ''din'' in ''din''ner are louder and longer. They may also have a different fundamental frequency, or other properties.

The main stress within a sentence, often found on the last stressed word, is called the ''nuclear stress''.

Stress and vowel reduction

In many languages, such as Russian and English, vowel reduction may occur when a vowel changes from a stressed to an unstressed position. In English, unstressed vowels may reduce to schwa-like vowels, though the details vary with dialect (see stress and vowel reduction in English). The effect may be dependent on lexical stress (for example, the unstressed first syllable of the word ''photographer'' contains a schwa , whereas the stressed first syllable of ''photograph'' does not ), or on prosodic stress (for example, the word ''of'' is pronounced with a schwa when it is unstressed within a sentence, but not when it is stressed).

Many other languages, such as Finnish and the mainstream dialects of Spanish, do not have unstressed vowel reduction; in these languages vowels in unstressed syllables have nearly the same quality as those in stressed syllables.

Stress and rhythm

Some languages, such as English, are said to be '' stress-timed languages''; that is, stressed syllables appear at a roughly constant rate and non-stressed syllables are shortened to accommodate that, which contrasts with languages that have ''syllable timing'' (e.g. Spanish) or '' mora timing'' (e.g. Japanese), whose syllables or moras are spoken at a roughly constant rate regardless of stress.

Historical effects

It is common for stressed and unstressed syllables to behave differently as a language evolves. For example, in the Romance languages, the original Latin short vowels and have often become diphthongs when stressed. Since stress takes part in verb conjugation, that has produced verbs with vowel alternation in the Romance languages. For example, the Spanish verb (to return, come back) has the form in the past tense but in the present tense (see Spanish irregular verbs). Italian shows the same phenomenon but with alternating with instead. That behavior is not confined to verbs; note for example Spanish from Latin , or Italian from Latin . There are also examples in French, though they are less systematic : from Latin where the first syllable was stressed, vs from Latin where the main stress was on the penultimate syllable.

Stress "deafness"

An operational definition of word stress may be provided by the stress "deafness" paradigm first developed by Dupoux, Peperkamp & Sebastián-Gallés (2001). The idea is that if listeners perform poorly on reproducing the presentation order of series of stimuli that minimally differ in the position of phonetic prominence (e.g. ), the language does not have word stress. The task involves a reproduction of the order of stimuli as a sequence of key strokes, whereby key "1" is associated with one stress location (e.g. ) and key "2" with the other (e.g. ). A trial may be from two to six stimuli in length. Thus, the order is to be reproduced as "1121". It was found that listeners whose native language was French performed significantly worse than Spanish listeners in reproducing the stress patterns by key strokes. The explanation is that Spanish has lexically contrastive stress, as evidenced by the minimal pairs like () and (), while in French, stress does not convey lexical information and there is no equivalent of stress minimal pairs as in Spanish.

An important case of stress "deafness" relates to Persian. The language has generally been described as having contrastive word stress or accent as evidenced by numerous stem and stem–clitic minimal pairs such as () and (). The authors argue that the reason why Persian listeners are "stress-deaf" is that their accent locations arise postlexically. Persian thus lacks stress in the strict sense.

Stress "deafness" has been studied for a number of languages, such as Polish and French learners of Spanish.

Spelling and notation for stress

The orthographies of some languages include devices for indicating the position of lexical stress. Some examples are listed below:
* In Modern Greek, all polysyllables are written with an acute accent () over the vowel of the stressed syllable. (The acute accent is also used on some monosyllables in order to distinguish homographs, as in ('the') and ('or'); here the stress of the two words is the same.)
* In Spanish orthography, stress may be written explicitly with a single acute accent on a vowel. Stressed antepenultimate syllables are always written with that accent mark, as in . If the last syllable is stressed, the accent mark is used if the word ends in the letters ''n'', ''s'', or a vowel, as in . If the penultimate syllable is stressed, the accent is used if the word ends in any other letter, as in . That is, if a word is written without an accent mark, the stress is on the penult if the last letter is a vowel, ''n'', or ''s'', but on the final syllable if the word ends in any other letter. However, as in Greek, the acute accent is also used for some words to distinguish various syntactical uses (e.g. 'tea' vs. a form of the pronoun 'you'; 'where' as a pronoun or ''wh''-complement, 'where' as an adverb).
* Catalan and Valencian orthographies use the acute and grave accents to mark both stress and vowel quality. An acute on indicates that the vowel is stressed and close-mid (), while grave on indicates that the vowel is stressed and open-mid (). Grave on and acute on simply indicate that the vowels are stressed. Thus, the acute is used on close or close-mid vowels, and the grave on open or open-mid vowels.
* In Filipino orthography (which also applies to other Philippine languages), an acute accent is used to distinguish similar words with distinct definitions. The position of the stress may occur in first, middle or final syllable of a word. Stress that occurs in the first syllable serves as the default word and is usually left unwritten e.g. ('whistle') which distinguishes from ('seven'). Diacritics in Modern Tagalog and other Philippine languages are rarely used in writing, cases of which the diacritical marks are used can only be seen in formal and academic setting. Vowels with an acute accent are not included in the Filipino alphabet, possible combinations include: á,é,í,ó and ú.
* In Portuguese, stress is sometimes indicated explicitly with an acute accent (for ''i'', ''u'', and open ''a'', ''e'', ''o''), or circumflex (for close ''a'', ''e'', ''o''). The orthography has an extensive set of rules that describe the placement of diacritics, based on the position of the stressed syllable and the surrounding letters.
* In Italian, the grave accent is needed in words ending with an accented vowel, e.g. , 'city', and in some monosyllabic words that might otherwise be confused with other words, like ('there') and ('the'). It is optional for it to be written on any vowel if there is a possibility of misunderstanding, such as ('condominiums') and ('joint owners'). (In this particular case, a frequent one in which diacritics present themselves, the difference of accents is caused by the fall of the second "i" from Latin in Italian, typical of the genitive, in the first noun (con/domìnìi/, meaning ); while the second was derived from the nominative (con/dòmini/, meaning simply )). The acute accent may be used on and to represent close-mid vowels when they are stressed. Since final is hardly ever close-mid, is very rarely encountered in written Italian (e.g. 'subway'). The two different accents may be used to differentiate minimal pairs within Italian (for example 'peach' vs. 'fishing'), but in practice this is limited to didactic texts.
* Maltese orthography indicates stress with grave accent.

Though not part of normal orthography, a number of devices exist that are used by linguists and others to indicate the position of stress (and syllabification in some cases) when it is desirable to do so. Some of these are listed here.
* Most commonly, the stress mark is placed before the beginning of the stressed syllable, where a syllable is definable. However, it is occasionally placed immediately before the vowel. In the International Phonetic Alphabet (IPA), primary stress is indicated by a high vertical line (primary stress mark: ) before the stressed element, secondary stress by a low vertical line (secondary stress mark: ). For example, or . Extra stress can be indicated by doubling the symbol: .
* Linguists frequently mark primary stress with an acute accent over the vowel, and secondary stress by a grave accent. Example: or . That has the advantage of not requiring a decision about syllable boundaries.
* In English dictionaries that show pronunciation by respelling, stress is typically marked with a prime mark placed after the stressed syllable: /si-lab′-ə-fi-kay′-shən/.
* In pronunciation guides, stress is often indicated using a combination of bold text and capital letters. For example, si-lab-if-i-KAY-shun or si-LAB-if-i-KAY-shun
* In Russian, Belarusian, and Ukrainian dictionaries, stress is indicated with marks called (, 'stress marks'). Primary stress is indicated with an acute accent (´) on a syllable's vowel (example: ). Secondary stress may be unmarked or marked with a grave accent: . If the acute accent sign is unavailable for technical reasons, stress can be marked by making the vowel capitalized or italic. In general texts, stress marks are rare, typically used either when required for disambiguation of homographs (compare 'in great quantities', and 'in great quantities'), or in rare words and names that are likely to be mispronounced. Materials for foreign learners may have stress marks throughout the text.
* In Dutch, indication of stress is usually marked by an acute accent on the vowel (or, in the case of a diphthong or double vowel, the first two vowels) of the stressed syllable. Compare ('deterioration') and ('rear exit').
* In Biblical Hebrew, a complex system of cantillation marks is used to mark stress, as well as verse syntax and the melody according to which the verse is chanted in ceremonial Bible reading. In Modern Hebrew, there is no standardized way to mark the stress. Most often, the cantillation mark (part of ), which looks like a left-pointing arrow above the consonant of the stressed syllable, for example ('morning') as opposed to ('cowboy'). That mark is usually used in books by the Academy of the Hebrew Language and is available on the standard Hebrew keyboard at AltGr-6. In some books, other marks, such as , are used.

See also

* Accent (poetry)
* Accent (music)
* Foot (prosody)
* Initial-stress-derived noun
* Pitch accent (intonation)
* Phonetic word
* Rhythm
* Syllable weight

References

External links

"Feet and Metrical Stress"
''The Cambridge Handbook of Phonology''


''Linguapress''

''Word Stress Rules: A Guide to Word and Sentence Stress Rules for English Learners and Teachers''
based on affixation

{{Authority control

Phonetics
Phonology
Poetic rhythm