Stock removal is the process of removing material (stock) from a workpiece. Stock removal processes include:
[Degarmo, p. viii.]
*
Machining
Machining is a manufacturing process where a desired shape or part is created using the controlled removal of material, most often metal, from a larger piece of raw material by cutting. Machining is a form of subtractive manufacturing, which util ...
*
Milling
Milling may refer to:
* Milling (minting), forming narrow ridges around the edge of a coin
* Milling (grinding), breaking solid materials into smaller pieces by grinding, crushing, or cutting in a mill
* Milling (machining), a process of using ro ...
*
Turning
Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates.
Usually the term "turning" is reserved for the generation of ...
*
Drilling
Drilling is a cutting process where a drill bit is spun to cut a hole of circular cross section (geometry), cross-section in solid materials. The drill bit is usually a rotary Cutting tool (machining), cutting tool, often multi-point. The bit i ...
*
Grinding
*
Filing
*
Broaching
*
Shaping
*
Planing
*
Sawing
A saw is a tool consisting of a tough blade, wire, or chain with a hard toothed edge used to cut through material. Various terms are used to describe toothed and abrasive saws.
Saws began as serrated materials, and when mankind learned how ...
Stock removal processes all fall under the umbrella of
subtractive manufacturing
Machining is a manufacturing process where a desired shape or part is created using the controlled removal of material, most often metal, from a larger piece of raw material by cutting. Machining is a form of subtractive manufacturing, which util ...
, a more general term.
References
Notes
Bibliography
*{{Citation , last = Degarmo , first = E. Paul , last2 = Black , first2 = J T. , last3 = Kohser , first3 = Ronald A. , title = Materials and Processes in Manufacturing , publisher = Wiley , year = 2003 , edition = 9th , isbn = 0-471-65653-4.
Metalworking terminology