Development
The Skeeto was initially intended to be an affordable light aircraft that could be built complete for under $500 in 1957. The fuselage was welded steel tubing, with mostly fabric covered wood construction for the wings and control surfaces. The engine for this kit venture was to be a low cost off-the shelf model. *Test model 1 was a Continental modified for . *Test model 2 was a two cycle engine with a belt reduction. *Test model 3 used two engines on a single v-belt making it a twin engine which flew at 25 mph. *Test model 4 had a homelite chainsaw engine at *Test model 5 used a Disston chain saw engine at *Test model 6 used a Disston chain saw engine mounted inverted. *Test model 7 used an Inverted Evinrude outboard boat motor. *Test model 8 used a right-side up Evinrude.Operational history
Test flights were limited to the length of the runway after the aircraft was registered as a "research and development" project. The roll rate was so low at 20-30 mph, that rudder turns were preferred. The 3-4 pound wing loading was considered impractically light for handling. An example of a SA-8 Skeeto was donated to theSpecifications (Stits SA-8A Skeeto)
References
{{Stits aircraft Homebuilt aircraft 1950s United States sport aircraft Parasol-wing aircraft Single-engined tractor aircraft