St Peter's Church is the parish church of

Hackness Hackness is a village and civil parish in the district and county of North Yorkshire, England. It lies within the North York Moors National Park. The parish population rose from 125 in the 2001 UK census to 221 in the 2011 UK census. From 19 ...

, a village in

North Yorkshire North Yorkshire is a Ceremonial counties of England, ceremonial county in Northern England.The Unitary authorities of England, unitary authority areas of City of York, York and North Yorkshire (district), North Yorkshire are in Yorkshire and t ...

, in England. A nunnery was founded in Hackness by

Hilda of Whitby Hilda of Whitby (or Hild; c. 614 – 680) was a saint of the early Church in Britain. She was the founder and first abbess of the monastery at Whitby which was chosen as the venue for the Synod of Whitby in 664. An important figure in the Chri ...

, in about 680. By the 11th century, there were three churches in the village, one of which was St Peter's Church, on the site of the former nunnery. The chancel arch survives from this period. The south arcade was added in the early 12th century, followed later in the century by the north arcade, tower and tower arch. The chancel, clerestory, spire and battlements were added in the 15th century, and then in the 17th century a

vestry A vestry was a committee for the local secular and ecclesiastical government of a parish in England, Wales and some English colony, English colonies. At their height, the vestries were the only form of local government in many places and spen ...

was added, along with a window in the north chapel. In 1870 a porch was added, and the aisles were rebuilt. The church was

grade I listed In the United Kingdom, a listed building is a structure of particular architectural or historic interest deserving of special protection. Such buildings are placed on one of the four statutory lists maintained by Historic England in England, Hi ...

in 1967. The church is built in

sandstone Sandstone is a Clastic rock#Sedimentary clastic rocks, clastic sedimentary rock composed mainly of grain size, sand-sized (0.0625 to 2 mm) silicate mineral, silicate grains, Cementation (geology), cemented together by another mineral. Sand ...

with a

slate Slate is a fine-grained, foliated, homogeneous, metamorphic rock derived from an original shale-type sedimentary rock composed of clay or volcanic ash through low-grade, regional metamorphism. It is the finest-grained foliated metamorphic ro ...

roof, and consists of a

nave The nave () is the central part of a church, stretching from the (normally western) main entrance or rear wall, to the transepts, or in a church without transepts, to the chancel. When a church contains side aisles, as in a basilica-type ...

with a

clerestory A clerestory ( ; , also clearstory, clearstorey, or overstorey; from Old French ''cler estor'') is a high section of wall that contains windows above eye-level. Its purpose is to admit light, fresh air, or both. Historically, a ''clerestory' ...

, north and south aisles, a south porch, a

chancel In church architecture, the chancel is the space around the altar, including the Choir (architecture), choir and the sanctuary (sometimes called the presbytery), at the liturgical east end of a traditional Christian church building. It may termi ...

with a north chapel and

, and a west

steeple In architecture, a steeple is a tall tower on a building, topped by a spire and often incorporating a belfry and other components. Steeples are very common on Christian churches and cathedrals and the use of the term generally connotes a relig ...

. The steeple has a tower with three stages, a

chamfer A chamfer ( ) is a transitional edge between two faces of an object. Sometimes defined as a form of bevel, it is often created at a 45° angle between two adjoining right-angled faces. Chamfers are frequently used in machining, carpentry, fur ...

plinth A pedestal or plinth is a support at the bottom of a statue, vase, column, or certain altars. Smaller pedestals, especially if round in shape, may be called socles. In civil engineering, it is also called ''basement''. The minimum height o ...

, a stair turret at the southwest, angle

buttress A buttress is an architectural structure built against or projecting from a wall which serves to support or reinforce the wall. Buttresses are fairly common on more ancient (typically Gothic) buildings, as a means of providing support to act ...

es, chamfered bands,

lancet window A lancet window is a tall, narrow window with a sharp pointed arch at its top. This arch may or may not be a steep lancet arch (in which the compass centres for drawing the arch fall outside the opening). It acquired the "lancet" name from its rese ...

s, paired bell openings with pointed heads under round arches and

hood mould In architecture, a hood mould, hood, label mould (from Latin , lip), drip mould or dripstone is an external moulded projection from a wall over an opening to throw off rainwater, historically often in form of a '' pediment''. This moulding can be ...

s, an

embattled A battlement, in defensive architecture, such as that of city walls or castles, comprises a parapet (a defensive low wall between chest-height and head-height), in which gaps or indentations, which are often rectangular, occur at intervals t ...

parapet A parapet is a barrier that is an upward extension of a wall at the edge of a roof, terrace, balcony, walkway or other structure. The word comes ultimately from the Italian ''parapetto'' (''parare'' 'to cover/defend' and ''petto'' 'chest/brea ...

, and a recessed octagonal spire. Inside, there is the Anglo-Saxon

Hackness Cross The Hackness Cross is an Anglo-Saxon high cross in Hackness, a village in North Yorkshire, in England. The cross was carved some time between the late 7th and early 9th centuries. It may be associated with a nunnery which Hilda of Whitby founded ...

, eight 15th-century

misericord A misericord (sometimes named mercy seat, like the biblical object) is a small wooden structure formed on the underside of a folding seat in a church which, when the seat is folded up, is intended to act as a shelf to support a person in a p ...

s, and a font cover of similar date on a 19th-century

font In metal typesetting, a font is a particular size, weight and style of a ''typeface'', defined as the set of fonts that share an overall design. For instance, the typeface Bauer Bodoni (shown in the figure) includes fonts " Roman" (or "regul ...

. There are several monuments of interest from 1592 on, including one by

Francis Leggatt Chantrey Sir Francis Leggatt Chantrey (7 April 1781 – 25 November 1841) was an English sculptor. He became the leading portrait sculptor in Regency era Britain, producing busts and statues of many notable figures of the time. Chantrey's most notable w ...

References

{{DEFAULTSORT:Hackness, St Peter Grade I listed churches in North Yorkshire Church of England church buildings in North Yorkshire 11th-century church buildings in England

St Peter Saint Peter (born Shimon Bar Yonah; 1 BC – AD 64/68), also known as Peter the Apostle, Simon Peter, Simeon, Simon, or Cephas, was one of the Twelve Apostles of Jesus and one of the first leaders of the early Christian Church. He appears repe ...

See also

References