Products and services
The company produced a range of products that were associated with FM broadcast radio transmission. During the 1990s the company produced audio limiting and stereo encoding products at a time when commercial broadcasters throughout the UK were needing to upgrade this type of equipment. The company's products were: * MaXiM Deviation limiter (Mk1 and Mk2 versions) * MPX5 Stereo encoder (Mk1 and Mk2 versions) * MPX5/OS Stereo encoder with overshoot correction * FM25/RDS RDS encoder using RE OEM module * FMB10 RDS encoder using Aztec OEM board * Guardian Audio failure detector * Guardian 2 Audio failure detector * FMLP2 2W FM exciter with optional limiter/stereo encoder * FM10 10W FM exciter with optional limiter/stereo encoder * FM25 17W FM exciter with optional limiter/stereo encoder * FM30 30W FM exciter with optional limiter/stereo encoder * TX400 Radio link transmitter with optional limiter/stereo encoder * RX400 Radio link receiver (Mk1 and Mk2 versions) * PA125 125W FM amplifier * PA250 250W FM amplifier * TAConn RS232 remote control for RDS TA flag switching * MicLim Microphone limiter based on the MaXiM limiter The company produced a range of cable head end equipment for multichannel audio distribution. These included low power versions of the FMLP2 and FM10 exciters and a 4-channel version called Quadmod. Passive combiners were also made with varying numbers of inputs. Towards the end of the brand's life, a range of audio interface products were manufactured. This product line was sold to the Sonifex company in 2006 and marketed under the ProAVM brand. As of 2019, only the RX400 link receiver remains available from Eddystone Broadcast. The FM30 exciter was a development from the original FM25. The main difference being the amplifier module and an uprated mains transformer. The FM25 first appeared in 1990. The production of these exciters ran for more than 20 years with many hundreds being produced. The design of most of the products used sealed cases (no ventilation) and linear power supplies. This resulted in very long life, particularly when used in dirty environments. The sealed cases meant that the electronics were protected from dirt and corrosion. Products such as the exciters, audio failure detectors and radio links remain in regular use around the world, despite being 20–30 years old.Locations
SBS started in North London. It moved to Hastings, East Sussex in 1991. In 2002, the company was moved to Pitchill near Evesham in Warwickshire with Eddystone Radio. A few years later, SBS/Eddystone moved to Alcester in Warwickshire where the company remains.History
The company started in the late 1980s, supplying equipment to unlicensed broadcasters. At that time it was based in north London. The highly regulated broadcast industry in the UK at that time meant that the market was not open to small companies. At the end of the 1980s, the UK radio industry was deregulated, with new 'Incremental Radio' stations licensed and launched from 1989 onwards. Stations were no longer required to sign transmission contracts with the government owned transmission operator, the IBA. During 1991, the company relocated toReferences
{{reflist Defunct telecommunications companies of the United Kingdom Electrical engineering companies of the United Kingdom 1980s establishments in England