The Solo 2625 is a series of
German aircraft engine
An aircraft engine, often referred to as an aero engine, is the power component of an aircraft propulsion system. Most aircraft engines are either piston engines or gas turbines, although a few have been rocket powered and in recent years many ...
s, designed and produced by
Solo Vertriebs- und Entwicklungs GmbH
Solo or SOLO may refer to:
Arts and entertainment Comics
* ''Solo'' (DC Comics), a DC comics series
* Solo, a 1996 mini-series from Dark Horse Comics
Characters
* Han Solo, a ''Star Wars'' character
* Jacen Solo, a Jedi in the non-canonical ''S ...
of
Fellbach for use in
ultralight aircraft
Ultralight aviation (called microlight aviation in some countries) is the flying of lightweight, 1- or 2-seat fixed-wing aircraft. Some countries differentiate between weight-shift control and conventional three-axis control aircraft with ailer ...
,
self-launching sailplane
A motor glider is a fixed-wing aircraft that can be flown with or without engine power. The FAI Gliding Commission Sporting Code definition is: a fixed-wing aerodyne equipped with a means of propulsion (MoP), capable of sustained soaring flight ...
s and
homebuilt aircraft.
[Tacke, Willi; Marino Boric; et al: ''World Directory of Light Aviation 2015-16'', pages 262-263. Flying Pages Europe SARL, 2015. ]
Design and development
The engine series are all twin-cylinder
two-stroke,
in-line, displacement, liquid-cooled, gasoline engine designs, with poly V belt
reduction drives. They employ dual
electronic ignition ignitions systems and produce , depending on the model, with a
compression ratio
The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values.
A fundamental specification for such engines, it is measured two ways: the stati ...
of 9.5:1.
Variants
;Solo 2625 01
:Model with a single diaphragm
carburetor
A carburetor (also spelled carburettor) is a device used by an internal combustion engine to control and mix air and fuel entering the engine. The primary method of adding fuel to the intake air is through the venturi tube in the main meteri ...