significant wave height

In physical oceanography, the significant wave height (SWH, HTSGW or ''H''_s)
is defined traditionally as the mean ''wave height'' (trough to crest) of the highest third of the waves (''H''_1/3). It is usually defined as four times the standard deviation of the surface elevation – or equivalently as four times the square root of the zeroth-order moment (area) of the ''wave spectrum''. The symbol ''H''_m0 is usually used for that latter definition. The significant wave height (H_s) may thus refer to ''H''_m0 or ''H''_1/3; the difference in magnitude between the two definitions is only a few percent.
SWH is used to characterize '' sea state'', including winds and swell.

Origin and definition

The original definition resulted from work by the oceanographer Walter Munk during World War II. The significant wave height was intended to mathematically express the height estimated by a "trained observer". It is commonly used as a measure of the height of ocean waves.

Time domain definition

Significant wave height ''H''_1/3, or ''H''_''s'' or ''H''_''sig'', as determined in the time domain, directly from the time series of the surface elevation, is defined as the average height of that one-third of the ''N'' measured waves having the greatest heights: $H_ = \frac\, \sum_^\, H_m$ where ''H''_m represents the individual wave heights, sorted into descending order of height as ''m'' increases from 1 to ''N''. Only the highest one-third is used, since this corresponds best with visual observations of experienced mariners, whose vision apparently focuses on the higher waves.

Frequency domain definition

Significant wave height ''H''_m0, defined in the frequency domain, is used both for measured and forecasted wave variance spectra. Most easily, it is defined in terms of the variance ''m''₀ or standard deviation ''σ''_''η'' of the surface elevation: $H_ = 4 \sqrt = 4 \sigma_\eta,$ where ''m''₀, the zeroth- moment of the variance spectrum, is obtained by integration of the variance spectrum. In case of a measurement, the standard deviation ''σ''_''η'' is the easiest and most accurate statistic to be used.
*Another wave-height statistic in common usage is the root-mean-square (or RMS) wave height ''H''_rms, defined as: $H_\text = \sqrt,$ with ''H''_m again denoting the individual wave heights in a certain time series.

Statistical distribution of the heights of individual waves

Significant wave height, scientifically represented as ''H''_s or ''H''_sig, is an important parameter for the statistical distribution of ocean waves. The most common waves are lower in height than ''H''_s. This implies that encountering the significant wave is not too frequent. However, statistically, it is possible to encounter a wave that is much higher than the significant wave.

Generally, the statistical distribution of the individual wave heights is well approximated by a Rayleigh distribution. For example, given that ''H''_s is , statistically:

* 1 in 10 will be larger than
* 1 in 100 will be larger than
* 1 in 1000 will be larger than

This implies that one might encounter a wave that is roughly double the significant wave height. However, in rapidly changing conditions, the disparity between the significant wave height and the largest individual waves might be even larger.

Other statistics

Other statistical measures of the wave height are also widely used. The RMS wave height, which is defined as square root of the average of the squares of all wave heights, is approximately equal to ''H''_s divided by 1.4.

For example, according to the Irish Marine Institute:
:''"… at midnight on 9/12/2007 a record significant wave height was recorded of 17.2m at with 'sic''a period of 14 seconds."''

Measurement

Although most measuring devices estimate the significant wave height from a wave spectrum, satellite radar altimeters are unique in measuring directly the significant wave height thanks to the different time of return from wave crests and troughs within the area illuminated by the radar. The maximum ever measured wave height from a satellite is during a North Atlantic storm in 2011.

Weather forecasts

The World Meteorological Organization stipulates that certain countries are responsible for providing weather forecasts for the world's oceans. These respective countries' meteorological offices are called Regional Specialized Meteorological Centers, or RSMCs. In their weather products, they give ocean wave height forecasts in significant wave height. In the United States, NOAA's National Weather Service is the RSMC for a portion of the North Atlantic, and a portion of the North Pacific. The Ocean Prediction Center and the Tropical Prediction Center's Tropical Analysis and Forecast Branch (TAFB) issue these forecasts.

RSMCs use wind-wave models as tools to help predict the sea conditions. In the U.S., NOAA's Wavewatch III model is used heavily.

Generalization to wave systems

A ''significant wave height'' is also defined similarly, from the ''wave spectrum'', for the different systems that make up the sea. We then have a ''significant wave height'' for the wind-sea or for a particular swell.

See also

* Ocean Prediction Center
* Rogue wave: a wave of over twice the significant wave height
* Sea state

Notes

External links

Current global map of significant wave height and periodNOAA Wavewatch IIINWS Environmental Modeling CenterEnvirtech solid state payload for directional waves measurement

{{physical oceanography

Naval architecture
Physical oceanography
Shipbuilding
Water waves