HOME

TheInfoList



OR:

SNC Demo-1, also known as Dream Chaser Demo-1, is the planned first flight of the
Sierra Nevada The Sierra Nevada () is a mountain range in the Western United States, between the Central Valley of California and the Great Basin. The vast majority of the range lies in the state of California, although the Carson Range spur lies primarily ...
robotic resupply spacecraft Unmanned spacecraft or uncrewed spacecraft are spacecraft without people on board, used for robotic spaceflight. Uncrewed spacecraft may have varying levels of autonomy from human input; they may be remote controlled, remote guided or even ...
Dream Chaser Dream Chaser is an American reusable lifting-body spaceplane being developed by Sierra Nevada Corporation (SNC) Space Systems. Originally intended as a crewed vehicle, the Dream Chaser Space System is set to be produced after the cargo varian ...
to the
International Space Station The International Space Station (ISS) is the largest modular space station currently in low Earth orbit. It is a multinational collaborative project involving five participating space agencies: NASA (United States), Roscosmos (Russia), JAXA ...
(ISS) under the CRS-2 contract with
NASA The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research. NASA was established in 1958, succeeding t ...
. The demonstration mission is planned for launch in December 2023 on the second flight of the ULA Vulcan Centaur rocket. Sierra Nevada Corporation (SNC) developed a new reusable spacecraft to provide commercial cargo resupply services to the International Space Station (ISS), based on decades of lifting body programs. Under the Commercial Orbital Transportation System (COTS) program, SNC designed Dream Chaser with industrial partner
Lockheed Martin The Lockheed Martin Corporation is an American aerospace, arms, defense, information security, and technology corporation with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It ...
. SNC also designed the accompanying Shooting Star cargo module with subcontractor Applied Composites. At the end of mission, the Shooting Star will destructively reenter the atmosphere and the Dream Chaser will land at the Kennedy Space Center's
Shuttle Landing Facility The Shuttle Landing Facility (SLF) also known as Launch and Landing Facility (LLF) is an airport located on Merritt Island in Brevard County, Florida, United States. It is a part of the Kennedy Space Center and was used by Space Shuttle for lan ...
.


Spacecraft

The Dream Chaser Cargo System will fly cargo resupply missions to the ISS under NASA's Commercial Resupply Services-2 program. This system features the Shooting Star, an expendable cargo module with solar panels, and the Dream Chaser, a reusable lifting body capable of returning of pressurized cargo to
Earth Earth is the third planet from the Sun and the only astronomical object known to harbor life. While large volumes of water can be found throughout the Solar System, only Earth sustains liquid surface water. About 71% of Earth's surfa ...
while undergoing maximum re-entry forces of 1.5 g. The Dream Chaser design is derived from
NASA The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research. NASA was established in 1958, succeeding t ...
's HL-20 Personnel Launch System
spaceplane A spaceplane is a vehicle that can fly and glide like an aircraft in Earth's atmosphere and maneuver like a spacecraft in outer space. To do so, spaceplanes must incorporate features of both aircraft and spacecraft. Orbital spaceplanes ten ...
concept from the 1990s, which in turn is descended from over 20,000 hours and six decades of experimental
lifting body A lifting body is a fixed-wing aircraft or spacecraft configuration in which the body itself produces lift. In contrast to a flying wing, which is a wing with minimal or no conventional fuselage, a lifting body can be thought of as a fuselage wi ...
vehicles, including the
X-20 Dyna-Soar The Boeing X-20 Dyna-Soar ("Dynamic Soarer") was a United States Air Force (USAF) program to develop a spaceplane that could be used for a variety of military missions, including aerial reconnaissance, bombing, space rescue, satellite mainten ...
,
Northrop M2-F2 The Northrop M2-F2 was a heavyweight lifting body based on studies at NASA's Ames and Langley research centers and built by the Northrop Corporation in 1966. Development The success of Dryden's M2-F1 program led to NASA's development and cons ...
,
Northrop M2-F3 The Northrop M2-F3 was a heavyweight lifting body rebuilt from the Northrop M2-F2 after it crashed at the Dryden Flight Research Center in 1967. It was modified with an additional third vertical fin - centered between the tip fins - to improve c ...
,
Northrop HL-10 The Northrop HL-10 was one of five US heavyweight lifting body designs flown at NASA's Flight Research Center (FRC—later Dryden Flight Research Center) in Edwards, California, from July 1966 to November 1975 to study and validate the concept o ...
, Martin X-24A and X-24B, and
Martin X-23 PRIME The Martin X-23A PRIME (Precision Reentry Including Maneuvering reEntry) (SV-5D) was a small lifting-body re-entry vehicle tested by the United States Air Force in the mid-1960s. Unlike ASSET, primarily used for structural and heating research, ...
. The vehicle to be used in SNC Demo-1 is named ''Tenacity''. The Shooting Star carries pressurized and unpressurized cargo, and serves as the power supply for the Dream Chaser. The Shooting Star will have a cargo capacity of . Its design is similar to the ''Exoliner'' cargo container shown in Lockheed Martin's ''Jupiter'' proposal for NASA's CRS-2.


Mission

SNC Demo-1 is the Dream Chaser demonstration mission under the Commercial Resupply Services-2 (CRS-2) contract with
NASA The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research. NASA was established in 1958, succeeding t ...
. Production and integration of the Dream Chaser spacecraft is performed in
Texas Texas (, ; Spanish language, Spanish: ''Texas'', ''Tejas'') is a state in the South Central United States, South Central region of the United States. At 268,596 square miles (695,662 km2), and with more than 29.1 million residents in 2 ...
,
Colorado Colorado (, other variants) is a state in the Mountain West subregion of the Western United States. It encompasses most of the Southern Rocky Mountains, as well as the northeastern portion of the Colorado Plateau and the western edge of t ...
, and
Florida Florida is a state located in the Southeastern region of the United States. Florida is bordered to the west by the Gulf of Mexico, to the northwest by Alabama, to the north by Georgia, to the east by the Bahamas and Atlantic Ocean, and to ...
. The Dream Chaser is mated with the Shooting Star at the launch site, and mission operations are conducted from control centers in Colorado and
Houston Houston (; ) is the most populous city in Texas, the most populous city in the Southern United States, the fourth-most populous city in the United States, and the sixth-most populous city in North America, with a population of 2,304,580 in ...
,
Texas Texas (, ; Spanish language, Spanish: ''Texas'', ''Tejas'') is a state in the South Central United States, South Central region of the United States. At 268,596 square miles (695,662 km2), and with more than 29.1 million residents in 2 ...
. Sierra Nevada selected ULA's
Vulcan Centaur Vulcan Centaur is a two-stage-to-orbit, heavy-lift launch vehicle that is under development by the United Launch Alliance (ULA) since 2014 with an initial flight expected in early 2023. It is principally designed to meet launch demands for the ...
as its launch vehicle for this Demo-1 mission and the six contracted NASA CRS-2 missions.


See also

*
Cygnus Orb-D1 Orbital-D1, also known as Orb-D1, and Cygnus 1, was the first flight of the Cygnus cargo spacecraft developed by Orbital Sciences Corporation. It was named after the late NASA astronaut and Orbital Sciences executive G. David Low. The flight ...
*
SpaceX COTS Demo Flight 2 SpaceX COTS Demo Flight 2 (COTS 2), also known as Dragon C2+, was the second test-flight for SpaceX's uncrewed SpaceX Dragon, Cargo Dragon spacecraft. It launched in May 2012 on the third flight of the company's two-stage Falcon 9 launch vehicl ...


References


External links


Dream Chaser
at
Sierra Nevada Corporation Sierra Nevada Corporation (SNC) is an American, privately held aerospace and national security contractor specializing in aircraft modification and integration, space components and systems, and related technology products for cybersecurity and ...
{{Future spaceflights Sierra Nevada Corporation aircraft Supply vehicles for the International Space Station 2023 in spaceflight 2023 in the United States Test spaceflights