Rotax 532
   HOME

TheInfoList



OR:

The Rotax 532 is a
two-stroke A two-stroke (or two-stroke cycle) engine is a type of internal combustion engine that completes a power cycle with two strokes of the piston, one up and one down, in one revolution of the crankshaft in contrast to a four-stroke engine which re ...
, two-cylinder,
rotary valve A rotary valve (also called rotary-motion valve) is a type of valve in which the rotation of a passage or passages in a transverse plug regulates the flow of liquid or gas through the attached pipes. The common stopcock is the simplest form of ro ...
engine, liquid-cooled, gear reduction-drive engine that was formerly manufactured by BRP-Rotax GmbH & Co. KG. It was designed for use on
ultralight aircraft Ultralight aviation (called microlight aviation in some countries) is the flying of lightweight, 1- or 2-seat fixed-wing aircraft. Some countries differentiate between weight-shift control and Aircraft flight control system, conventional three-a ...
.Raisner, William: ''LEAF catalog'', pages 6-105. Leading Edge Air Foils, 1995.


Design

The 532 features liquid-cooled cylinder heads and cylinders with a rotary valve inlet. Cooling is via one or two externally mounted radiators. Lubrication is by use of pre-mixed fuel and oil at 50:1. The 532 has a single Bosch flywheel
magneto ignition An ignition magneto (also called a high-tension magneto) is an older type of ignition system used in spark-ignition engines (such as petrol engines). It uses a magneto and a transformer to make pulses of high voltage for the spark plugs. The old ...
system. It can be equipped with either one or two piston-type
carburetor A carburetor (also spelled carburettor or carburetter) is a device used by a gasoline internal combustion engine to control and mix air and fuel entering the engine. The primary method of adding fuel to the intake air is through the Ventu ...
s. It uses a manifold-driven pneumatic fuel pump to provide fuel pressure. The engine's propeller drive is via a Rotax type B or C style gearbox. The standard engine includes a muffler exhaust system and an intake air filter. The standard starter is a
recoil start Rope start (also called ripcord , ''pull start'', or ''rewind start'') is a method of starting an internal combustion engine, usually on small machines, such as lawn mowers, chainsaws, grass trimmers, ultralight aircraft, small outboard mo ...
type, with an electric starter optional. An integral
alternating current Alternating current (AC) is an electric current that periodically reverses direction and changes its magnitude continuously with time, in contrast to direct current (DC), which flows only in one direction. Alternating current is the form in w ...
generator produces 12 volts. The Rotax 532 was replaced in production by the improved
Rotax 582 The Rotax 582 is a two-stroke cycle, two-stroke, two-cylinder, rotary intake valve, oil-in-fuel or oil injection pump, liquid-cooled, gear reduction-drive aircraft engine manufactured by Rotax, BRP-Rotax GmbH & Co. KG. It is for use in non-ce ...
engine design. The 582 increased the cylinder bore from the 532's 72 mm to 76 mm. This increased the displacement from 521.2 cc to 580.7 cc, an increase of 11%. The increased displacement had the effect of flattening out the 532's torque curve and allowed the 582 to produce useful power over a wider rpm range. Reliability over the 532 was also improved.


Applications


Specifications (Rotax 532)


See also

* Rotax aircraft engines * Arrow 500


References

{{Rotax aeroengines Two-stroke aircraft piston engines Rotax engines