Roche limit

In celestial mechanics, the Roche limit, also called Roche radius, is the distance from a celestial body within which a second celestial body, held together only by its own force of gravity, will disintegrate because the first body's tidal forces exceed the second body's self-gravitation. Inside the Roche limit, orbiting material disperses and forms rings, whereas outside the limit, material tends to coalesce. The Roche radius depends on the radius of the second body and on the ratio of the bodies' densities.

The term is named after Édouard Roche (, ), the French astronomer who first calculated this theoretical limit in 1848.

Explanation

The Roche limit typically applies to a satellite's disintegrating due to tidal forces induced by its ''primary'', the body around which it orbits. Parts of the satellite that are closer to the primary are attracted more strongly by gravity from the primary than parts that are farther away; this disparity effectively pulls the near and far parts of the satellite apart from each other, and if the disparity (combined with any centrifugal effects due to the object's spin) is larger than the force of gravity holding the satellite together, it can pull the satellite apart. Some real satellites, both natural and artificial, can orbit within their Roche limits because they are held together by forces other than gravitation. Objects resting on the surface of such a satellite would be lifted away by tidal forces. A weaker satellite, such as a comet, could be broken up when it passes within its Roche limit.

Since, within the Roche limit, tidal forces overwhelm the gravitational forces that might otherwise hold the satellite together, no satellite can gravitationally coalesce out of smaller particles within that limit. Indeed, almost all known planetary rings are located within their Roche limit. (Notable exceptions are Saturn's E-Ring and Phoebe ring. These two rings are formed from particles released from the moons Enceladus and Phoebe due to cryovolcanic plumes and meteoroid impacts, respectively.)

The gravitational effect occurring below the Roche limit is not the only factor that causes comets to break apart. Splitting by thermal stress, internal gas pressure, and rotational splitting are other ways for a comet to split under stress.

Determination

The limiting distance to which a satellite can approach without breaking up depends on the rigidity of the satellite. At one extreme, a completely rigid satellite will maintain its shape until tidal forces break it apart. At the other extreme, a highly fluid satellite gradually deforms leading to increased tidal forces, causing the satellite to elongate, further compounding the tidal forces and causing it to break apart more readily.

Most real satellites would lie somewhere between these two extremes, with tensile strength rendering the satellite neither perfectly rigid nor perfectly fluid. For example, a rubble-pile asteroid will behave more like a fluid than a solid rocky one; an icy body will behave quite rigidly at first but become more fluid as tidal heating accumulates and its ices begin to melt.

But note that, as defined above, the Roche limit refers to a body held together solely by the gravitational forces which cause otherwise unconnected particles to coalesce, thus forming the body in question. The Roche limit is also usually calculated for the case of a circular orbit, although it is straightforward to modify the calculation to apply to the case (for example) of a body passing the primary on a parabolic or hyperbolic trajectory.

Rigid satellites

The ''rigid-body'' Roche limit is a simplified calculation for a spherical satellite. Irregular shapes such as those of tidal deformation on the body or the primary it orbits are neglected. It is assumed to be in hydrostatic equilibrium. These assumptions, although unrealistic, greatly simplify calculations.

The Roche limit for a rigid spherical satellite is the distance, $d$, from the primary at which the gravitational force on a test mass at the surface of the object is exactly equal to the tidal force pulling the mass away from the object:

:$d = R_M\left(2 \frac \right)^$

where $R_M$ is the radius of the primary, $\rho_M$ is the density of the primary, and $\rho_m$ is the density of the satellite. This can be equivalently written as

:$d = R_m\left(2 \frac \right)^$

where $R_m$ is the radius of the secondary, $M_M$ is the mass of the primary, and $M_m$ is the mass of the secondary. A third equivalent form uses only one property for each of the two bodies, the mass of the primary and the density of the secondary, is

:$d = 0.7816 \left( \frac \right)^$

These all represent the orbital distance inside of which loose material (e.g. regolith) on the surface of the satellite closest to the primary would be pulled away, and likewise material on the side opposite the primary will also go away from, rather than toward, the satellite.

Fluid satellites

A more accurate approach for calculating the Roche limit takes the deformation of the satellite into account. An extreme example would be a tidally locked liquid satellite orbiting a planet, where any force acting upon the satellite would deform it into a prolate spheroid.

The calculation is complex and its result cannot be represented in an exact algebraic formula. Roche himself derived the following approximate solution for the Roche limit:

:$d \approx 2.44 \ R\left( \frac \right)^$

However, a better approximation that takes into account the primary's oblateness and the satellite's mass is:

:$d \approx 2.423 \ R\left( \frac \right)^ \left( \frac \right)^$

where $c/R$ is the oblateness of the primary.

The fluid solution is appropriate for bodies that are only loosely held together, such as a comet. For instance, comet Shoemaker–Levy 9's decaying orbit around Jupiter passed within its Roche limit in July 1992, causing it to fragment into a number of smaller pieces. On its next approach in 1994 the fragments crashed into the planet. Shoemaker–Levy 9 was first observed in 1993, but its orbit indicated that it had been captured by Jupiter a few decades prior.International Planetarium Society Conference, Astronaut Memorial Planetarium & Observatory, Cocoa, Florida
Rob Landis 10–16 July 199

/ref>

See also

* Roche lobe
* Chandrasekhar limit
* Spaghettification (the extreme case of tidal distortion)
* Hill sphere
* Sphere of influence (black hole)
* Black hole
* Triton (moon) (Neptune's satellite)
* Comet Shoemaker–Levy 9

References

Sources

* 2.44 is mentioned on page 258.
*
*
*
*
*
*

External links

Discussion of the Roche Limit


Audio: Cain/Gay – Astronomy Cast
Tidal Forces Across the Universe – August 2007

Roche Limit Description from NASA

{{DEFAULTSORT:Roche Limit
Concepts in astrophysics
Equations of astronomy
Gravity
Planetary rings
Space science
Tidal forces
Solar System