Reynolds Technology is a manufacturer of tubing for

bicycle frame A bicycle frame is the main component of a bicycle, onto which wheels and other components are fitted. The modern and most common frame design for an upright bicycle is based on the safety bicycle, and consists of two triangles: a main triangle ...

s and other bicycle components based in

Birmingham Birmingham ( ) is a City status in the United Kingdom, city and metropolitan borough in the metropolitan county of West Midlands (county), West Midlands, within the wider West Midlands (region), West Midlands region, in England. It is the Lis ...

, England established in 1898.

History

The Reynolds Tube Company was founded in 1898 by John Reynolds in

, England, but traces its origins back to 1841 when John Reynolds set up a company manufacturing nails. In 1897, the company

patent A patent is a type of intellectual property that gives its owner the legal right to exclude others from making, using, or selling an invention for a limited period of time in exchange for publishing an sufficiency of disclosure, enabling discl ...

ed the process for making butted tubes, which are thicker at the ends than in the middle, this allowed frame builders to create frames that were both strong and lightweight. Reynolds introduced the double-butted tube-set 531 in 1934. ''The Patent Butted Tube Co., Ltd.'', the predecessor of the present company, was spun off from John Reynolds' original company in 1898. In 1923 the ''Patent Butted Tube Co., Ltd'' changed its name to ''Reynolds Tube Co., Ltd.'' and retained this name up until 1928 when it was acquired by Tube Investments, Ltd and became ''TI Reynolds 531 Ltd''. In 1996 ''Coyote Sports Inc.'', a privately held company based in

Boulder, Colorado Boulder is a List of municipalities in Colorado#Home rule municipality, home rule city in Boulder County, Colorado, United States, and its county seat. With a population of 108,250 at the 2020 United States census, 2020 census, it is the most ...

acquired ''TI Reynolds 531 Ltd.'' resulting in a name change to ''Reynolds Cycle Technology Ltd''. In 2006 the company underwent another name change to ''Reynolds Technology Ltd.'', reflecting the increasing revenues from diversification into "new" sectors for tubing outside the cycle industry. When ''Coyote Sports'' entered

Chapter 11 Chapter 11 of the United States Bankruptcy Code ( Title 11 of the United States Code) permits reorganization under the bankruptcy laws of the United States. Such reorganization, known as Chapter 11 bankruptcy, is available to every business, w ...

reorganization, a

management buy-out A management buyout (MBO) is a form of acquisition in which a company's existing managers acquire a large part, or all, of the company, whether from a parent company or High-net-worth individual, individual. Management- and/or leveraged buyouts bec ...

resulted in the company returning to its base in the UK.

Cycle tubing development

Reynolds has over the years developed a number of steel alloys, most notably Reynolds 531, which has a high strength and can be made into strong, but lightweight tubes for bicycle frames. Before the introduction of more exotic materials such as

aluminium Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...

titanium Titanium is a chemical element; it has symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resistant to corrosion in ...

or composites, Reynolds was considered the dominant maker of high end materials for bicycle frames, with 27 winners of the

Tour de France The Tour de France () is an annual men's multiple-stage cycle sport, bicycle race held primarily in France. It is the oldest and most prestigious of the three Grand Tour (cycling), Grand Tours, which include the Giro d'Italia and the Vuelta a ...

winning the race riding on Reynolds tubing. The

Raleigh Bicycle Company The Raleigh Bicycle Company is a British bicycle manufacturer based in Nottingham, England and founded by Woodhead and Angois in 1885. Using Raleigh as their brand name, it is one of the oldest bicycle companies in the world. After being acquir ...

Nottingham Nottingham ( , East Midlands English, locally ) is a City status in the United Kingdom, city and Unitary authorities of England, unitary authority area in Nottinghamshire, East Midlands, England. It is located south-east of Sheffield and nor ...

, England was a big customer for Reynolds 531 tubing used in their racing cycle range. Reynolds 531 has now been largely replaced in new frames by still-better steels. The latest, for race or sports frames, is Reynolds 953. Reynolds worked closely with Carpenter Speciality Alloys to develop 953. It started reaching frame builders in 2005. 953 is based on a specially developed maraging steel stainless steel alloy that can achieve a tensile strength in excess of 2000 MPa (853 is around 1400 MPa), giving a good strength-to-weight ratio. Because of the high strength of the steel, extremely thin tube walls (down to 0.3 mm) can be used, thus reducing the weight. Reynolds 953 is no longer being sold due to supply chain issues.

Composites

U.S. The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 states and a federal capital district, Washington, D.C. The 48 contiguous ...

division called Reynolds Composites was created to manufacture composite components.

Tubing types

Steel

*SMS - Plain gauge (0.8mm) drawn tubeset in high tensile steel. Replaced 531 plain gauge in 1980, replaced by 453. *453 - cromoly steel alloy. Reynolds produced only the 3 main tubes in this alloy and they were single butted, replaced by 500 series. *500 - A chromium-molybdenum (CrMo) steel, seamed, plain gauge tubeset of 3 main triangle tubes **500ATB - Mountain, All terrain, Off-road **500 Magnum - Same use as ATB *501 - Reynolds 501 was a chromium-molybdenum (CrMo) steel, seamed, butted 3-tubes tubeset that made its debut about 1983 and was available in two different thicknesses. **501ATB - Mountain, All terrain, Off-road **501 Magnum - Same use as ATB **501SB - Single Butted **501SL - Special lightweight (SL) tubeset *K2 - Reynolds K2 was a chromium-molybdenum (CrMo) steel similar to 501, seamed, butted tubeset, with eight laterally aligned ribs on the butt section, designed and produced exclusively for

Raleigh Raleigh ( ) is the List of capitals in the United States, capital city of the U.S. state of North Carolina. It is the List of municipalities in North Carolina, second-most populous city in the state (after Charlotte, North Carolina, Charlotte) ...

between about 1993 and 1995 *Optima - A chromium-molybdenum (CrMo) steel, seamed, butted tubeset designed and produced exclusively for

from 1995. Similar to 501 but tweaked for tig welding. *525 - Cold worked AISI-4130 (CrMo).

Yield Strength In materials science and engineering, the yield point is the point on a stress–strain curve that indicates the limit of elastic behavior and the beginning of plastic behavior. Below the yield point, a material will deform elastically and w ...

Ultimate Tensile Strength Ultimate tensile strength (also called UTS, tensile strength, TS, ultimate strength or F_\text in notation) is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials, the ultimate t ...

(YS/UTS): 600/700 MPa,

density Density (volumetric mass density or specific mass) is the ratio of a substance's mass to its volume. The symbol most often used for density is ''ρ'' (the lower case Greek letter rho), although the Latin letter ''D'' (or ''d'') can also be u ...

7.78 g/cm³ 8 tube set **525-Triathlon - almost identical to 525, with the only differences being seat stays are 0.1mm thinner, and chainstays are 0.1mm thicker, than standard 525 **520 - is the same as 525, made under license in Taiwan, to the same specs and qc standards as for 525. For proximity to manufacturing in South-East Asia. * 531 - Manganese/Molybdenum. YS/UTS: 695/803 MPa (45-52 Tsi, 100-130 ksi) (number quoted are for after (lower) and before (higher) brazing), density 7.85 g/cm³ Starting in about 1980 tubesets of different gauges were named as follows. **531ATB - Designed for Mountain, All terrain, Off-road **531Competition/531C - Competition Racing tubeset. Road racing, track, time trial and cyclo-cross. main tubes were 8/5/8 double butted **531CS - Club Sport. Double butted 531 main tubes, 501 forks and stays. **531Magnum - Oversize, heavy gauge tubeset for use in ATB's. **531OS - Oversize tubeset **531Professional - Superseded 531SL, thinner and 150g lighter than 531Competition. **531SL - Special lightweight (SL) tubeset, comprising 531 main tubes drawn thinner than standard 531. Later named 531Pro. **531 Speed Stream - 531SL Oval shaped aerodynamic tube. 50g heavier than 531C but 100g lighter than 531ST. **531ST - Special Touring tubeset **531 Super Tourist - Superseded ST. **531DS Designer select tubing. Alternative 531 tubes with differing gauges and profiles were available to the specialist builder. *631 - Seamless air-hardened. UTS: 800-900 MPa, density 7.78 g/cm³ **631OS - Oversize tubeset *653 - Was a mixed tubeset with a non-heat treated 753 main triangle. Stays used 753r and fork blades were borrowed from the 531c tube set. *708 - 708 was a tube set in Reynolds' range in the 1990s. It has main tubes with special section. These were not butted, but had 8 flats running along the length of the tube. The rear stays would be 753. *725 - Heat-Treated 525; AISI4130 (CrMo), with strength placing it just above 921 and below 931; UTS: 1080-1280 MPa, density 7.78 g/cm³ **725os - Oversize version of the 725 tubeset *731OS - Oversize tubeset introduced in 1992 double butted oversized tubes with laterally aligned stiffening ribs on the but sections to maximize stiffness and torsional rigidity. Tubeset: Strength steering tube and fork 802N/mm2, top, down and seat tube 925N/mm2 and rear triangle 1315N/mm2. *753 - Heat-Treated Manganese-Molybdenum. Essentially 531 made with reduced wall thickness and heat treated to increase tensile strength. UTS: 1080-1280 MPa (70-83 Tsi, 157-186 ksi) Complete tube set of 11 tubes (Frame 8, Fork 3). 753 can only be lugged and fillet-brazed with an alloy of 56% silver below 700 degrees Celsius and sale is restricted only to approved builders certified by Reynolds **753ATB - Mountain, All terrain, Off-road **753R - Road tubeset **753T - Thinner tube gauges for time trial framesets **753OS - Oversize tubeset *853 - Seamless air-hardening heat-treated. UTS: 1250-1400 MPa, density 7.78 g/cm³ **853OS - Oversize tubeset *921 - Cold-work stainless steel *931 - Precipitation hardening stainless steel. Tubing introduced in 2012. Can be used with 953 to reduce overall frame costs. *953 - Maraging stainless steel. Introduced in 2005. UTS: 1750-2050 MPa, density 7.8 g/cm³ No longer being sold.

Aluminium

*7005 - Al-Zn alloy. UTS: 400 MPa, density 2.78 g/cm³ *6061 - Al-Si-Mg alloy. UTS: 325 MPa, density 2.70 g/cm³ *X-100 - Al-Li Alloy. UTS: 550-600 MPa, density 2.65 g/cm³

Titanium

*6Al-4V - Seamless ELI Grade. UTS: 900-1150 MPa, density 4.42 g/cm³ *3Al-2.5V - Seamless. UTS: 810-960 MPa, density 4.48 g/cm³ *CP 2 - Supplied to

during the 1990s

Magnesium

*MZM Electron -

Magnesium alloy Magnesium alloys are mixtures of magnesium (the lightest structural metal) with other metals (called an alloy), often aluminium, zinc, manganese, silicon, copper, rare earths and zirconium. Magnesium alloys have a hexagonal lattice structur ...

. UTS: ~300 MPa, density ~1.80 g/cm³

References

External links

Reynolds websiteReynolds Decal Archive
{{British bicycle manufacturers Cycle manufacturers of the United Kingdom Manufacturing companies based in Birmingham, West Midlands Cycle parts manufacturers Companies that have filed for Chapter 11 bankruptcy Companies that filed for Chapter 11 bankruptcy in 1999 Science and technology in the United Kingdom