Retrotronics
   HOME

TheInfoList



OR:

Retrotronics (a
portmanteau In linguistics, a blend—also known as a blend word, lexical blend, or portmanteau—is a word formed by combining the meanings, and parts of the sounds, of two or more words together.
of "retro" and "electronics", also ''retro-tronics'') is the making of
electric circuit An electrical network is an interconnection of electrical components (e.g., battery (electricity), batteries, resistors, inductors, capacitors, switches, transistors) or a model of such an interconnection, consisting of electrical elements (e. ...
s or appliances using older electric components, such as
vacuum tube A vacuum tube, electron tube, thermionic valve (British usage), or tube (North America) is a device that controls electric current flow in a high vacuum between electrodes to which an electric voltage, potential difference has been applied. It ...
s, Nixie displays,
relay A relay Electromechanical relay schematic showing a control coil, four pairs of normally open and one pair of normally closed contacts An automotive-style miniature relay with the dust cover taken off A relay is an electrically operated switc ...
s,
uniselector In electrical engineering, a stepping switch or stepping relay, also known as a uniselector, is an electromechanical device that switches an input signal path to one of several possible output paths, directed by a train of electrical pulses. The ...
s, analogue meters, etc. These are usually chosen more for their aesthetic qualities than performance. Retrotronics is a popular strand within the
steampunk Steampunk is a subgenre of science fiction that incorporates retrofuturistic technology and Applied arts, aesthetics inspired by, but not limited to, 19th-century Industrial Revolution, industrial steam engine, steam-powered machinery. Steampun ...
movement. At the Oxford exhibition of Steampunk art, a third of the works on show had a strong retrotronic influence, from light fittings of period components through to computer keyboards and webcams of burnished copper and brass. Outside steampunk, similar influences are found amongst the retro-futurist scene. Other sources cite the
Maker movement The maker culture is a contemporary subculture representing a technology-based extension of DIY culture that intersects with hardware-oriented parts of hacker culture and revels in the creation of new devices as well as tinkering with existing o ...
as an influence. A recent musical trend has sought to recapture early 1980s 8-bit game and synthesiser sounds, often referred to as
chiptune Chiptune, also called 8-bit music (although not all chiptune is 8-bit music), is a style of electronic music made using the programmable sound generator (PSG) sound chips or synthesizers in vintage arcade machines, computers and video gam ...
. Artists such as
Kid Carpet Kid Carpet (born Ed Patrick) is a musician from Bristol, England. His music has been described as 'kiddy disco punk' and 'shit-hop', as it is recorded in his home studio using instruments such as samplers, Casio keyboards, and various children ...
perform entire sets on children's toys or pocket synths of the period. Other artists, such as
Nullsleep Jeremiah Johnson (born October 7, 1980), better known as Nullsleep, is an American electronic musician and computer artist currently residing in New York City. In 1999 he co-founded the low-bit art collective 8bitpeoples, and has served as its ...
, perform using only period video game hardware. DJs offer dance music events built from samples of period games or gadgets. Some
audiophile An audiophile (from + ) is a person who is enthusiastic about high-fidelity sound reproduction. The audiophile seeks to achieve high sound quality in the audio reproduction of recorded music, typically in a quiet listening space in a room with ...
s and
electric guitar An electric guitar is a guitar that requires external electric Guitar amplifier, sound amplification in order to be heard at typical performance volumes, unlike a standard acoustic guitar. It uses one or more pickup (music technology), pickups ...
ists also favour the use of valve (
vacuum tube A vacuum tube, electron tube, thermionic valve (British usage), or tube (North America) is a device that controls electric current flow in a high vacuum between electrodes to which an electric voltage, potential difference has been applied. It ...
) amplifiers, on the ground of sound quality or particular "colour". This is still within the scope of retrotronics, but is on a functional ground, rather than aesthetic. Designs of the 1960s are highly sought after today, and still support a market in manufacturing new valves and replacing time-expired components such as
electrolytic capacitor An electrolyte is a substance that conducts electricity through the movement of ions, but not through the movement of electrons. This includes most soluble Salt (chemistry), salts, acids, and Base (chemistry), bases, dissolved in a polar solven ...
s. In the audiophile world, such popularity is justified on the basis of sound quality; the earlier valve amplifier designs were free of such artifacts as
crossover distortion Crossover distortion is a type of distortion which is caused by switching between devices driving a load. It is most commonly seen in complementary, or "push-pull", class-B amplifier stages, although it is occasionally seen in other types of circ ...
that beset the early
bipolar transistor A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers. In contrast, a unipolar transistor, such as a field-effect transistor (FET), uses only one kind of charge carrier. A ...
designs of the 1960s. Despite more recent designs that have removed these problems, the "
valve sound Tube sound (or valve sound) is the characteristic sound associated with a vacuum tube amplifier (valve amplifier in British English), a vacuum tube-based audio amplifier. At first, the concept of ''tube sound'' did not exist, because practicall ...
" is still preferred by some, who will pay large amounts to achieve it. It's also notable that almost all recent audiophile valve amplifiers make a deliberate display of their valves and place them visibly on show. Another trend is the mixing of tubes with more up-to-date circuitry; these systems are referred to as a "hybrid systems". For example, in the Netherlands, the TubeSociety employs this technique.Tentlabs website
/ref> Amongst guitarists, the goal of a "valve sound" is different, a deliberate distortion effect achieved through either over-driving valves, or through
microphonics Microphonics, microphony, or microphonism describes the phenomenon wherein certain components in electronic devices transform mechanical vibrations into an undesired electrical signal (noise). The term comes from analogy with a microphone, wh ...
, the valve's sensitivity to air vibration as well as electrical signals. Original, or reproduction,
guitar amplifiers A guitar amplifier (or amp) is an electronic device or system that strengthens the electrical signal from a pickup on an electric guitar, bass guitar, or acoustic guitar so that it can produce sound through one or more loudspeakers, which are ...
such as the
Vox AC30 The Vox AC30 is a Instrument amplifier, guitar amplifier manufactured by Vox (company), Vox. It was introduced in 1958 to meet the growing demand for louder amplifiers. Its "jangly" high-end sound made it widely used by British musicians and oth ...
now command a premium price. A few guitarists are collecting germanium
transistor A transistor is a semiconductor device used to Electronic amplifier, amplify or electronic switch, switch electrical signals and electric power, power. It is one of the basic building blocks of modern electronics. It is composed of semicondu ...
s, and built effect pedals with them, because of the distorted "older rock" sound of effect pedals built with early germanium transistors. One of the earlier examples of widespread retrotronics was the resurgent popularity of black
Bakelite Bakelite ( ), formally , is a thermosetting polymer, thermosetting phenol formaldehyde resin, formed from a condensation reaction of phenol with formaldehyde. The first plastic made from synthetic components, it was developed by Belgian chemist ...
telephones in the UK. In the early 1980s, the UK domestic telephone market was deregulated and for the first time it was possible to legally purchase telephones outright and install them at home through a simple plug and socket. As well as the expected rush for modern lightweight handsets, there was also a brisk trade in 300 series telephones, refurbished internally to modern standards, but as a functional decorator item that appeared unchanged from the 1930s.


References


External links

* http://www.tubeclockdb.com/ a large collection of retro Nixie clocks and kits {{Cyberpunk and derivatives Steampunk Retro style Retrofuturism