R-410A

R-410A is a refrigerant fluid used in air conditioning and heat pump applications. It is a zeotropic but near- azeotropic mixture of difluoromethane (CH₂F₂, called R-32) and pentafluoroethane (CHF₂CF₃, called R-125). R-410A is sold under the trademarked names AZ-20, EcoFluor R410, Forane 410A, Genetron R410A, Puron, and Suva 410A.

On December 27, 2020, the United States Congress passed the American Innovation and Manufacturing (AIM) Act, which directs US Environmental Protection Agency (EPA) to phase down production and consumption of hydrofluorocarbons (HFCs). The AIM act was passed because HFCs have high global warming potential. Rules developed under the AIM Act require HFC production and consumption to be reduced by 85% from 2022 to 2036. R-410A will be restricted by this Act because it contains the HFC R-125. Other refrigerants with lower global warming potential will replace R-410A in most applications, just as R-410A replaced the earlier ozone-depleting refrigerant, R-22.

History

R-410A was invented and patented by Allied Signal (later Honeywell) in 1991. Other producers around the world have been licensed to manufacture and sell R-410A. R-410A was successfully commercialized in the air conditioning segment by a combined effort of Carrier Corporation, Emerson Climate Technologies, Inc., Copeland Scroll Compressors (a division of Emerson Electric Company), and Allied Signal. Carrier Corporation was the first company to introduce an R-410A-based residential air conditioning unit into the market in 1996 and holds the trademark "Puron".

Transition from R-22 to R-410A

In accordance with terms and agreement reached in the Montreal Protocol (The Montreal Protocol on Substances That Deplete the Ozone Layer), the United States Environmental Protection Agency mandated that production or import of R-22 along with other hydrochlorofluorocarbons (HCFCs) be phased out in the United States. In the EU and the US, R-22 could not be used in the manufacture of new air conditioning or similar units after 1 January 2010. In other parts of the world, the phase-out date varied from country to country.
Since 1 January 2020, the production and importation of R-22 has been banned in the US; the only available sources of R-22 include that which has been stockpiled or recovered from existing devices.

By 2020, most newly manufactured window air conditioners and mini split air conditioners in the United States used refrigerant R-410A. Further, R-410A had largely replaced R-22 as the preferred refrigerant for use in residential and commercial air conditioners in Japan and Europe, as well as the United States.

Environmental effects

Unlike alkyl halide refrigerants that contain bromine or chlorine, R-410A (which contains only fluorine) does not contribute to ozone depletion and therefore became more widely used as ozone-depleting refrigerants like R-22 were phased out. However, like methane, R-410A has a global warming potential (GWP) that is appreciably worse than CO₂ (GWP = 1) for the time it persists. R-410A is a mixture of 50% HFC-32 and 50% HFC-125. HFC-32 has a 4.9 year lifetime and a 100-year GWP of 675 and HFC-125 has a 29-year lifetime and a 100-year GWP of 3500. The combination has an effective GWP of 2088, higher than that of R-22 (100-year GWP = 1810), and an atmospheric lifetime of nearly 30 years compared with the 12-year lifetime of R-22.

Since R-410A allows for higher SEER ratings than an R-22 system by reducing power consumption, the overall impact on global warming of R-410A systems can, in some cases, be lower than that of R-22 systems due to reduced greenhouse gas emissions from power plants. This assumes that the atmospheric leakage will be sufficiently managed. Under the assumption that preventing ozone depletion is more important in the short term than GWP reduction, R-410A is preferable to R-22.

R-410A Phaseout

The phase-down mandated by the AIM Act will lead to R-410A's replacement by other refrigerants beginning in 2022. Alternative refrigerants are available, including hydrofluoroolefins, R-454B (a zeotropic blend of R-32 and R-1234yf), hydrocarbons (such as propane R-290 and isobutane R-600A), and even carbon dioxide ( R-744, GWP = 1). The alternative refrigerants have much lower global warming potential than R-410A. Some alternatives have mild or moderate flammability, operate in higher pressure ranges, or require specialized compressor lubricants and seals.

Physical properties

R-410A is an A1 class non-flammable substance according to ISO 817 & ASHRAE 34. One of its components, R-32, is mildly flammable (AL2), and the other, R-125, is an A1 class substance that suppresses the flammability of R32.

Thermophysical properties
Properties of refrigerant R410a

Precautions

R-410A cannot be used in R-22 service equipment because of higher operating pressures (approximately 40 to 70% higher). Parts designed specifically for R-410A must be used. R-410A systems thus require service personnel to use different tools, equipment, safety standards, and techniques to manage the higher pressure. Equipment manufacturers were aware of these differences and required the certification of professionals installing R-410A systems. In addition, the AC&R Safety Coalition was created to help educate professionals about R-410A systems.

R-410A cylinders were once colored rose, but they now bear a standard light gray color.

While R-410A has negligible fractionation potential, it cannot be ignored when charging.

Trade names

* Suva 410A (DuPont)
* Puron (Carrier)
* Genetron AZ-20 (Honeywell)

See also

* Hydrofluoroolefin
* R-32
* R-454B
* List of refrigerants

References

{{DEFAULTSORT:R-410a
Refrigerants
Greenhouse gases
Daikin