A proximity card or prox card also known as a key card or keycard is a contactless

smart card A smart card (SC), chip card, or integrated circuit card (ICC or IC card), is a card used to control access to a resource. It is typically a plastic credit card-sized card with an Embedded system, embedded integrated circuit (IC) chip. Many smart ...

which can be read without inserting it into a reader device, as required by earlier

magnetic stripe card The term digital card can refer to a physical item, such as a memory card on a camera, or, increasingly since 2017, to the digital content hosted as a virtual card or cloud card, as a digital virtual representation of a physical card. They shar ...

s such as credit cards and contact type smart cards. The proximity cards are part of the contactless card technologies. Held near an electronic reader for a moment they enable the identification of an encoded number. The reader usually produces a beep or other sound to indicate the card has been read. The term "proximity card" refers to the older 125 kHz devices as distinct from the newer 13.56 MHz

contactless smartcard A contactless smart card is a contactless credential whose dimensions are credit card size. Its embedded integrated circuits can store (and sometimes process) data and communicate with a terminal via NFC. Commonplace uses include transit ticket ...

s. Second generation prox cards are used for mass and distance reading applications. Proximity cards typically have a read range of up to which is the main difference from the

with a range of . The card can often be left in a wallet or purse,Access Control Card Handling Guide https://www.supercircuits.com/media/docs/proxcard_handling_guide_en.pdf and read by simply holding the wallet or purse near the reader. These early proximity cards can't hold more data than a

, and only cards with smart chips (ie,

s) can hold other types of data like electronic funds balance for

contactless payment Contactless payment systems are credit cards and debit cards, key fobs, smart cards, or other devices, including smartphones and other mobile devices, that use radio-frequency identification (RFID) or near-field communication (NFC) for making sec ...

systems, history data for time and attendance or biometric templates. When used without encoding data, only with the card serial number, contactless smartcards have similar functionalities to proximity cards.

Types

Passive cards

Passive 125 kHz cards, the more widely used type which were described above, are powered by

radio frequency Radio frequency (RF) is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around to around . This is roughly between the u ...

signals from the reader device and so have a limited range and must be held close to the reader unit. They are used as keycards for access control doors in office buildings. A version with more memory,

s, are used for other applications:

library card A library card can refer to several Plastic card, cards traditionally used for the management of books and patrons in a library. In its most common use, a library card serves similar functions as a corporate membership card. A person who holds a ...

systems, and

public transit Public transport (also known as public transit, mass transit, or simply transit) are forms of transport available to the general public. It typically uses a fixed schedule, route and charges a fixed fare. There is no rigid definition of wh ...

fare cards.

Active cards

Active 125 kHz prox cards, sometimes called vicinity cards, are powered by an internal lithium battery. They can have a greater range, up to 2 meters (6 ft). Other contactless technologies like UHF (Ultra High Frequency) smart cards can reach up to 150 meters (500 ft) and are often used for applications where the card is read inside a vehicle, such as security gates which open when a vehicle with the access card inside approaches, or automated toll collection. The battery eventually runs down, however, and the card must be replaced after 2 to 7 years.

Method of operation

The card and the reader unit communicate with each other through 125 kHz radio frequency fields (13.56 MHz for the

cards) by a process called resonant energy transfer. Passive cards have three components which are sealed inside the plastic: an antenna consisting of a coil of wire, a

capacitor In electrical engineering, a capacitor is a device that stores electrical energy by accumulating electric charges on two closely spaced surfaces that are insulated from each other. The capacitor was originally known as the condenser, a term st ...

, and an

integrated circuit An integrated circuit (IC), also known as a microchip or simply chip, is a set of electronic circuits, consisting of various electronic components (such as transistors, resistors, and capacitors) and their interconnections. These components a ...

(IC) which contains the user's ID number in specific formats and no other data. The reader has its own antenna, which continuously transmits a short range radio frequency field. When the card is placed within range of the reader, the antenna coil and capacitor, which form a

tuned circuit An LC circuit, also called a resonant circuit, tank circuit, or tuned circuit, is an electric circuit consisting of an inductor, represented by the letter L, and a capacitor, represented by the letter C, connected together. The circuit can act ...

, absorb and store energy from the field, resonating at the frequency emitted by the reader. This energy is rectified to

direct current Direct current (DC) is one-directional electric current, flow of electric charge. An electrochemical cell is a prime example of DC power. Direct current may flow through a conductor (material), conductor such as a wire, but can also flow throug ...

which powers the

. The chip sends its ID number or other data to the antenna coil, which transmits it by radio frequency signals back to the reader unit. The reader checks whether the ID number from the card is correct, and then performs whatever function it has been programmed to do for that ID number. All the energy to power the card comes from the reader unit, so passive cards must be close to a reader to transmit their data. An active card contains a flat

lithium cell Lithium battery may refer to: * Lithium metal battery, a non-rechargeable battery with lithium as an anode ** Lithium–air battery ** Lithium–iron disulfide battery ** Lithium–sulfur battery ** Nickel–lithium battery ** Rechargeable lit ...

in addition to the above components to power it. The integrated circuit contains a receiver which uses the battery's power to amplify the signal from the reader unit so it is stronger, allowing the card to detect the reader at a greater distance. The battery also powers a

transmitter In electronics and telecommunications, a radio transmitter or just transmitter (often abbreviated as XMTR or TX in technical documents) is an electronic device which produces radio waves with an antenna (radio), antenna with the purpose of sig ...

circuit in the chip which transmits a stronger return signal to cover the greater distance.

Standards for proximity cards

Proximity cards are all proprietary. This is also the case of the memory-based first generation of

s. This means that there is no compatibility between the readers of a specific brand and the cards of another brand.

Contactless smartcard A contactless smart card is a contactless credential whose dimensions are credit card size. Its embedded integrated circuits can store (and sometimes process) data and communicate with a terminal via NFC. Commonplace uses include transit ticket ...

s are covered by the

ISO/IEC 14443 ISO/IEC 14443 ''Identification cards – Contactless integrated circuit cards – Proximity cards'' is an international standard that defines proximity cards used for identification, and the transmission protocols for communicating with it. The ...

and/or the

ISO/IEC 15693 ISO/IEC 15693, is an ISO/ IEC standard for ''vicinity cards'', i.e. cards which can be read from a greater distance as compared with proximity cards. Such cards can normally be read out by a reader without being powered themselves, as the reader ...

ISO/IEC 18000 ISO/IEC JTC 1, entitled "Information technology", is a joint technical committee (JTC) of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Its purpose is to develop, maintain and ...

standards. These standards define two types of card ("A" and "B", each with different

communications protocols A communication protocol is a system of rules that allows two or more entities of a communications system to transmit information via any variation of a physical quantity. The protocol defines the rules, syntax, semantics, and synchronization of ...

) which typically have a range up to . The related

( vicinity card) standard typically works up to a longer range of . The reality is that

as well as

can only be fully implemented on microprocessor-based cards. The best way to check if a technology meets ISO standard is to ask the manufacturer if it can be emulated on other devices without any proprietary hardware.

125 kHz readers and formats

The card readers communicate in various protocols, for example the Wiegand protocol that consists of a data 0 and a data 1 circuit (or binary or simple on/off (digital) type circuit). Other known protocols are mono directional Clock and Data or bidirectional OSDP (RS 485), RS 232 or UART. The earliest card formats were up to 64 bits long. As demand has increased, bit size has increased to continue to provide unique numbers. Often, the first several bits can be made identical; these are called facility or site codes. The idea is that company A has a facility code of ''xn'' and a card set of 0001 through 1000 and company B has a facility code of ''yn'' and a card set also of 0001 through 1000. For smartcards, a numbering system is internationally harmonized and allocated by Netherlands-based

NEN (registration authority) NEN or Nen may refer to: Acronym *Near Earth Network (formerly Ground Network), a NASA network of ground stations to support space flight missions *NEN (TV station), an Australian television station licensed to, and serving northern New South Wales ...

according to ISO/IEC 6523 and ISO/IEC 15459 standards.

References

{{DEFAULTSORT:Proximity Card