The Pressure Equipment Directive (PED) 2014/68/EU (formerly 97/23/EC) of the EU sets out the
standards for the
design
A design is the concept or proposal for an object, process, or system. The word ''design'' refers to something that is or has been intentionally created by a thinking agent, and is sometimes used to refer to the inherent nature of something ...
and
fabrication of
pressure
Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country and eve ...
equipment ("pressure equipment" means
steam boilers,
pressure vessel
A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.
Construction methods and materials may be chosen to suit the pressure application, and will depend on the size o ...
s,
piping
Within industry, piping is a system of pipes used to convey fluids (liquids and gases) from one location to another. The engineering discipline of piping design studies the efficient transport of fluid.
Industrial process piping (and accomp ...
,
safety valves and other components and assemblies subject to pressure loading) generally over one liter in volume and having a maximum pressure more than 0.5
bar gauge. It also sets the administrative procedures requirements for the "conformity assessment" of pressure equipment, for the free placing on the European market without local legislative barriers. It has been mandatory throughout the EU since 30 May 2002, with 2014 revision fully effective as of 19 July 2016. The standards and regulations regarding
pressure vessels and
boiler
A boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, centra ...
safety are also very close to the US standards defined by the
American Society of Mechanical Engineers
The American Society of Mechanical Engineers (ASME) is an American professional association that, in its own words, "promotes the art, science, and practice of multidisciplinary engineering and allied sciences around the globe" via "continuing edu ...
(ASME). This enables most international inspection agencies to provide both verification and certification services to assess compliance to the different pressure equipment directives. From the pressure vessel manufactures PED does not generally require a prior manufacturing permit/certificate/stamp as ASME does.
Contents
# Scope and Definitions (including exemptions of its scope)
# Market surveillance
# Technical requirements: classification of pressure equipment according to type and content.
# Free movement
# Presumption of conformity
# Committee on technical standards and regulations
# Committee on Pressure Equipment
# Safeguard clause
# Classification of pressure equipment
# Conformity assessment
# European approval for materials
# Notified bodies
# Recognized third-party organisations
# User inspectorates
# CE marking
# Unduly affixed CE marking
# International co-operation
# Decisions entailing refusal or restriction
# Repeal
# Transposition and transitional provisions
# Addressees of the Directive: the EU member states for implementation in national laws and/or regulations.
* Annex I: Essential safety requirements
*# General
*# Design
*# Manufacturing
*# Materials
*# Fired or otherwise heated pressure equipment with a risk of overheating (article 3.1)
*# Piping
*# Specific quantitative requirements for certain pressure equipment
* Appendix II: Conformity assessment tables. Actually diagrams of pressure vs. volume (or diameter for pipes), for classification of equipment in four classes.
* Appendix III: Conformity assessment procedures
* Appendix IV: Minimum criteria to be met when designating the notified bodies (article 12) and the recognised third party organisations (article 13)
* Appendix V: Criteria to be met when authorising user inspectorates (article 14)
* Appendix VI: CE marking
* Appendix VII: Declaration of conformity
Transition to Directive 2014/68/EU
Directive 97/23/EC was fully superseded by directive 2014/68/EU from 20 July 2016 onwards. Article 13 of the new directive (classification of pressure equipment) became effective 1 June 2015, replacing article 9 of directive 97/23/EC.
European Commission: Pressure Equipment Directive
/ref>
UK implementation
In the UK the Pressure Equipment (Safety) Regulations 2016 PE(S)R (Formerly Pressure Equipment Regulations 1999 (PER)) and the Pressure Systems Safety Regulations 2000 apply:[UK Legislation]
Pressure Equipment Regulations 1999
accessed 16 October 2022 see Health and safety regulations in the United Kingdom. The Health and Safety Executive and the Health and Safety Executive for Northern Ireland are the named enforcement authorities. Some of the provisions included in PE(S)R 2016 apply differently in NI for as long as the Northern Ireland Protocol is in force after UK existing EU.
See also
* Pressure vessel
A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.
Construction methods and materials may be chosen to suit the pressure application, and will depend on the size o ...
* EN 13445
EN or En or en may refer to:
Businesses
* Bouygues (stock symbol EN)
* Island Rail Corridor, formerly known as the Esquimalt and Nanaimo Railway (reporting mark EN)
* Euronews, a news television and internet channel
Language and writing
* N, 1 ...
References
{{reflist
External links
Directive 2014/68/EU of the European Parliament (Pressure Equipment Directive)
Essential links for CE Marking in the UK
Engineering equipment
European Union directives
European Union technology policy
Gas technologies
Pressure vessels
Structural engineering standards
1997 in law
1997 in the European Union
2014 in law
2014 in the European Union