Pressure compounding is the method in which pressure in a

steam turbine A steam turbine or steam turbine engine is a machine or heat engine that extracts thermal energy from pressurized steam and uses it to do mechanical work utilising a rotating output shaft. Its modern manifestation was invented by Sir Charles Par ...

is made to drop in a number of stages rather than in a single

nozzle A nozzle is a device designed to control the direction or characteristics of a fluid flow (specially to increase velocity) as it exits (or enters) an enclosed chamber or pipe (material), pipe. A nozzle is often a pipe or tube of varying cross ...

. This method of compounding is used in Rateau and

Zoelly Heinrich Zoelly (1862–1937) was a Mexican-Swiss engineer. He developed steam turbines and turbine-driven locomotives and patented the geothermal heat pump in 1912. Life and work Heinrich Zoelly was the fifth child of Franz Xaver Zoelly. His f ...

turbines.

Construction

The arrangement consists of a number of simple impulse turbines in series mounted on a common shaft. The exit steam from one turbine is made to enter the nozzle of the succeeding turbine. Each of the simple impulse turbines would then be termed a "stage" of the turbine. Each stage comprises its ring of nozzle and blades. The steam from the

boiler A boiler is a closed vessel in which fluid (generally water) is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, centra ...

passes through the first nozzle ring, where its

pressure Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country and eve ...

drops and

velocity Velocity is a measurement of speed in a certain direction of motion. It is a fundamental concept in kinematics, the branch of classical mechanics that describes the motion of physical objects. Velocity is a vector (geometry), vector Physical q ...

increases. The high-velocity jet steam is directed onto the first moving blades, wherein nearly all of its velocity is absorbed. The steam pressure remains unaltered. The steam from the first ring of moving blades enters the second ring of nozzles where its pressure is further reduced and velocity increased again. The next ring of moving blades absorbs the velocity obtained from this second ring nozzle. The process is repeated in the remaining rings until the whole of the pressure has been absorbed.

Effect

The total pressure drop of the steam does not take place in the first nozzle, but is split equally between all the nozzle rings in the arrangement. The effect of absorbing the pressure drop in stages is to reduce the velocity of the steam entering the moving blades.

References

Steam turbines {{Mech-engineering-stub

Construction

Effect

See also

References