The Precision 15 CB is an American

sailing dinghy Dinghy sailing is the activity of sailing small boats - usually for fun, learning necessary sailing skills (often also within family), and competition. RYA lists Five essentials of sailing dinghies as: * The sails * The hydrofoil, foils (i.e. t ...

, that was designed by Jim Taylor and first built in 1995. There was also a version of the same design with a fixed

keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...

, the

Precision 15 The Precision 15, also called the Precision 15 K (for keel), is an American trailerable sailboat, that was designed by Jim Taylor and first built in 1995. A sailing dinghy version with a centerboard and no ballast was also built and designate ...

, sometimes called the Precision 15 K (for keel).

Production

The design was built by Precision Boat Works in

Palmetto, Florida Palmetto is a city in Manatee County, Florida, United States. As of the 2020 census, the population was listed as 13,323, up from 12,606 at the 2010 census. It is part of the Sarasota metropolitan area, North Port–Bradenton–Sarasota, Florida ...

United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...

from 1995 to 2018. More than 800 examples of both models were produced.

Design

The Precision 15 is a recreational

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

, built predominantly of

fiberglass Fiberglass (American English) or fibreglass (English in the Commonwealth of Nations, Commonwealth English) is a common type of fibre-reinforced plastic, fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened i ...

, with a

vinyl ester resin Vinyl ester resin, or often just vinyl ester, is a resin produced by the esterification of an epoxy resin with acrylic or methacrylic acids. The "vinyl" groups refer to these ester substituents, which are prone to polymerize and thus an inhibito ...

skin coat. It has a fractional sloop rig with

anodized Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts. The process is called ''anodizing'' because the part to be treated forms the anode electrode of an electro ...

aluminum Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...

spars and a hinged mast step. The hull has a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a plumb transom, a transom-hung, kick-up

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...

controlled by a wooden

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post, rudder post or stock to provide leverage in the form of torque for the helmsman to turn ...

, with a tiller extension and a retractable

centerboard A centreboard or centerboard (US) is a retractable hull appendage which pivots out of a slot in the hull of a sailboat, known as a ''centreboard trunk'' (UK) or ''centerboard case'' (US). The retractability allows the centreboard to be raised t ...

. The boat has foam flotation, a

boom vang A boom vang (US) or kicking strap (UK) (often shortened to "vang" or "kicker") is a line or piston system on a sailboat used to exert downward force on the boom and thus control the shape of the sail. The Collins English Dictionary defines it a ...

and

jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its forward corner (tack) is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main ty ...

tracks. The boat has a draft of with the centerboard extended and with it retracted allowing beaching or ground transportation on a trailer. The manufacturer lists the boat's design goals as "safety, stability, reliable handling, and sprightly speed under sail". An optional mount may be fitted for a small

outboard motor An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorised method ...

for docking and maneuvering. The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...

of .

References

External links

* {{Sailing dinghies and skiffs Dinghies 1990s sailboat type designs Two-person sailboats Sailboat types built in the United States Sailboat type designs by Jim Taylor Yacht Designs Sailboat types built by Precision Boat Works

Production

Design

See also

References

External links