The Porter Gyropachute was a 1910s experimental direct-lift machine designed by James Robertson Porter.

Design and development

James Robertson Porter was an Australian-born civil engineer, resident in the United Kingdom, who became interested in flight in the mid-1900s. He developed a series of un-crewed test-rigs which incorporated annular fans fitted with vertical blades, drawing air down and through a set of two superimposed annular surfaces. Porter's fourth, and first full-size, craft was called the Gyropachute. It consisted primarily of two superimposed parachute-shaped surfaces. An opening of diameter in the uppermost surface allowed air to be drawn in by wide impeller, fitted with vertical blades, powered by a

Gnome A gnome () is a mythological creature and diminutive spirit in Renaissance magic and alchemy, introduced by Paracelsus in the 16th century and widely adopted by authors, including those of modern fantasy literature. They are typically depict ...

rotary engine. The air would be expelled out through an annular shroud created by the lowermost surface, creating lift. Segmented flexible skirts arranged around the circumference of the outer shroud could be controlled by the pilot, via a steering wheel, to manoeuvre the craft. The Gyropachute was exhibited at the 1913 Olympia Aero Show. It is not known if the craft was tested, or if it flew.

Specifications

References

1910s British experimental aircraft Unflown aircraft VTOL aircraft Ducted fan-powered aircraft Single-engined piston aircraft {{Aero-stub

Design and development

Specifications

See also

References