The Piaggio P.16 was an Italian heavy

bomber A bomber is a military combat aircraft designed to attack ground and naval targets by dropping air-to-ground weaponry (such as bombs), launching aerial torpedo, torpedoes, or deploying air-launched cruise missiles. The first use of bombs dropped ...

designed and built by

Piaggio Piaggio & C. SpA (Piaggio ) is an Italian motor vehicle manufacturer, which produces a range of two-wheeled motor vehicles and compact commercial vehicles under seven brands: Piaggio, Vespa, Gilera, Aprilia, Moto Guzzi, Derbi, and Scarabeo. Its ...

for the ''

Regia Aeronautica The Italian Royal Air Force (''Regia Aeronautica Italiana'') was the name of the air force of the Kingdom of Italy. It was established as a service independent of the Royal Italian Army from 1923 until 1946. In 1946, the monarchy was abolis ...

'' (Italian Royal Air Force).

Design and development

The P.16 was a three-engine shoulder-

wing A wing is a type of fin that produces lift while moving through air or some other fluid. Accordingly, wings have streamlined cross-sections that are subject to aerodynamic forces and act as airfoils. A wing's aerodynamic efficiency is expres ...

monoplane of mostly metal construction, with inverted gull wings. Its wing was thick and semi-elliptical, and its tail was mounted high on the

fuselage The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...

. It had retractable main

landing gear Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Martin ...

and a spatted, non-retractable tailwheel. In addition to bombs, its armament consisted of four 7.62-millimeter (0.3-inch) machine guns, of which two were mounted in the leading edge of the wing, one in a retractable dorsal turret, and one in the rear of the fuselage beneath the tail. The bombardier (bomb-aimer) manned a compartment set behind the nose engine on the underside of the fuselage.

Operational history

The P.16 first flew in November 1934, and an order for 12 aircraft was placed and then cancelled, with preference given to the

Piaggio P.32 The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading. Desig ...

, which was produced from 1936 to 1939.

Operators

; *''

Specifications

References

External links

*http://www.flightglobal.com/pdfarchive/view/1936/1936%20-%200073.html {{Portal bar, Italy, Companies, Aviation P.016 1930s Italian bomber aircraft Trimotors Shoulder-wing aircraft Aircraft first flown in 1934 Inverted gull-wing aircraft