HOME

TheInfoList



OR:

In
geometry Geometry (; ) is a branch of mathematics concerned with properties of space such as the distance, shape, size, and relative position of figures. Geometry is, along with arithmetic, one of the oldest branches of mathematics. A mathematician w ...
, the Petr–Douglas–Neumann theorem (or the PDN-theorem) is a result concerning arbitrary planar
polygon In geometry, a polygon () is a plane figure made up of line segments connected to form a closed polygonal chain. The segments of a closed polygonal chain are called its '' edges'' or ''sides''. The points where two edges meet are the polygon ...
s. The theorem asserts that a certain procedure when applied to an arbitrary polygon always yields a
regular polygon In Euclidean geometry, a regular polygon is a polygon that is Equiangular polygon, direct equiangular (all angles are equal in measure) and Equilateral polygon, equilateral (all sides have the same length). Regular polygons may be either ''convex ...
having the same number of sides as the initial polygon. The theorem was first published by
Karel Petr Karel Petr (; 14 June 1868, Zbyslav, Austria-Hungary – 14 February 1950, Prague, Czechoslovakia) was a mathematician from Bohemia in Austria-Hungary and later Czechoslovakia Czechoslovakia ( ; Czech language, Czech and , ''Česko-Slov ...
(1868–1950) of
Prague Prague ( ; ) is the capital and List of cities and towns in the Czech Republic, largest city of the Czech Republic and the historical capital of Bohemia. Prague, located on the Vltava River, has a population of about 1.4 million, while its P ...
in 1905 (in Czech) and in 1908 (in German). It was independently rediscovered by
Jesse Douglas Jesse Douglas (July 3, 1897 – September 7, 1965) was an American mathematician and Fields Medalist known for his general solution to Plateau's problem. Life and career He was born to a Jewish family in New York City, the son of Sarah ...
(1897–1965) in 1940 and also by B H Neumann (1909–2002) in 1941. The naming of the theorem as ''Petr–Douglas–Neumann theorem'', or as the ''PDN-theorem'' for short, is due to Stephen B Gray. It has also been called Douglas's theorem, the Douglas–Neumann theorem, the Napoleon–Douglas–Neumann theorem and Petr's theorem. The PDN-theorem is a generalisation of
Napoleon's theorem In geometry, Napoleon's theorem states that if equilateral triangles are constructed on the sides of any triangle, either all outward or all inward, the lines connecting the centres of those equilateral triangles themselves form an equilateral tr ...
, which corresponds to the case of
triangle A triangle is a polygon with three corners and three sides, one of the basic shapes in geometry. The corners, also called ''vertices'', are zero-dimensional points while the sides connecting them, also called ''edges'', are one-dimension ...
s, and
van Aubel's theorem In plane geometry, Van Aubel's theorem describes a relationship between squares constructed on the sides of a quadrilateral. Starting with a given convex quadrilateral, construct a square (geometry), square, external to the quadrilateral, on each ...
which corresponds to the case of
quadrilateral In Euclidean geometry, geometry a quadrilateral is a four-sided polygon, having four Edge (geometry), edges (sides) and four Vertex (geometry), corners (vertices). The word is derived from the Latin words ''quadri'', a variant of four, and ''l ...
s.


Statement of the theorem

The Petr–Douglas–Neumann theorem asserts the following. :''If isosceles triangles with apex angles 2kπ/n, for an integer k with 1 ≤ k ≤ n − 2 are erected on the sides of an arbitrary n-gon A0, whose apices are the vertices of a new n-gon A1, and if this process is repeated n-2 times, but with a different value of k for the n-gon formed from the free apices of these triangles at each step, until all values 1 ≤ k ≤ n − 2 have been used (in arbitrary order), to form a sequence A1, A2, ... An-2, of n-gons, their centroids all coincide with the centroid of A0, and the last one, An−2 is a regular n-gon ''.


Specialisation to triangles

In the case of triangles, the value of ''n'' is 3 and that of ''n'' − 2 is 1. Hence there is only one possible value for ''k'', namely 1. The specialisation of the theorem to triangles asserts that the triangle A1 is a regular 3-gon, that is, an equilateral triangle. A1 is formed by the apices of the isosceles triangles with apex angle 2π/3 erected over the sides of the triangle A0. The vertices of A1 are the centers of equilateral triangles erected over the sides of triangle A0. Thus the specialisation of the PDN theorem to a triangle can be formulated as follows: :''If equilateral triangles are erected over the sides of any triangle, then the triangle formed by the centers of the three equilateral triangles is equilateral.'' The last statement is the assertion of the
Napoleon's theorem In geometry, Napoleon's theorem states that if equilateral triangles are constructed on the sides of any triangle, either all outward or all inward, the lines connecting the centres of those equilateral triangles themselves form an equilateral tr ...
.


Specialisation to quadrilaterals

In the case of
quadrilateral In Euclidean geometry, geometry a quadrilateral is a four-sided polygon, having four Edge (geometry), edges (sides) and four Vertex (geometry), corners (vertices). The word is derived from the Latin words ''quadri'', a variant of four, and ''l ...
s, the value of ''n'' is 4 and that of ''n'' − 2 is 2. There are two possible values for ''k'', namely 1 and 2, and so two possible apex angles, namely: :(2×1×π)/4 = π/2 = 90° ( corresponding to ''k'' = 1 ) :(2×2×π)/4 = π = 180° ( corresponding to ''k'' = 2 ). According to the PDN-theorem the quadrilateral A2 is a regular 4-gon, that is, a
square In geometry, a square is a regular polygon, regular quadrilateral. It has four straight sides of equal length and four equal angles. Squares are special cases of rectangles, which have four equal angles, and of rhombuses, which have four equal si ...
. The two-stage process yielding the square A2 can be carried out in two different ways. (The apex ''Z'' of an
isosceles triangle In geometry, an isosceles triangle () is a triangle that has two Edge (geometry), sides of equal length and two angles of equal measure. Sometimes it is specified as having ''exactly'' two sides of equal length, and sometimes as having ''at le ...
with apex angle π erected over a line segment ''XY'' is the
midpoint In geometry, the midpoint is the middle point of a line segment. It is equidistant from both endpoints, and it is the centroid both of the segment and of the endpoints. It bisects the segment. Formula The midpoint of a segment in ''n''-dim ...
of the line segment ''XY''.)


Construct A1 using apex angle π/2 and then A2 with apex angle π.

In this case the vertices of A1 are the free apices of
isosceles triangle In geometry, an isosceles triangle () is a triangle that has two Edge (geometry), sides of equal length and two angles of equal measure. Sometimes it is specified as having ''exactly'' two sides of equal length, and sometimes as having ''at le ...
s with apex angles π/2 erected over the sides of the quadrilateral A0. The vertices of the quadrilateral A2 are the
midpoint In geometry, the midpoint is the middle point of a line segment. It is equidistant from both endpoints, and it is the centroid both of the segment and of the endpoints. It bisects the segment. Formula The midpoint of a segment in ''n''-dim ...
s of the sides of the quadrilateral A1. By the PDN theorem, A2 is a square. The vertices of the quadrilateral A1 are the centers of squares erected over the sides of the quadrilateral A0. The assertion that quadrilateral A2 is a square is equivalent to the assertion that the
diagonal In geometry, a diagonal is a line segment joining two vertices of a polygon or polyhedron, when those vertices are not on the same edge. Informally, any sloping line is called diagonal. The word ''diagonal'' derives from the ancient Greek � ...
s of A1 are equal and
perpendicular In geometry, two geometric objects are perpendicular if they intersect at right angles, i.e. at an angle of 90 degrees or π/2 radians. The condition of perpendicularity may be represented graphically using the '' perpendicular symbol'', � ...
to each other. The latter assertion is the content of
van Aubel's theorem In plane geometry, Van Aubel's theorem describes a relationship between squares constructed on the sides of a quadrilateral. Starting with a given convex quadrilateral, construct a square (geometry), square, external to the quadrilateral, on each ...
. Thus
van Aubel's theorem In plane geometry, Van Aubel's theorem describes a relationship between squares constructed on the sides of a quadrilateral. Starting with a given convex quadrilateral, construct a square (geometry), square, external to the quadrilateral, on each ...
is a special case of the PDN-theorem.


Construct A1 using apex angle π and then A2 with apex angle π/2.

In this case the vertices of A1 are the
midpoint In geometry, the midpoint is the middle point of a line segment. It is equidistant from both endpoints, and it is the centroid both of the segment and of the endpoints. It bisects the segment. Formula The midpoint of a segment in ''n''-dim ...
s of the sides of the quadrilateral A0 and those of A2 are the apices of the triangles with apex angles π/2 erected over the sides of A1. The PDN-theorem asserts that A2 is a square in this case also.


Images illustrating application of the theorem to quadrilaterals


Specialisation to pentagons

In the case of
pentagon In geometry, a pentagon () is any five-sided polygon or 5-gon. The sum of the internal angles in a simple polygon, simple pentagon is 540°. A pentagon may be simple or list of self-intersecting polygons, self-intersecting. A self-intersecting ...
s, we have ''n'' = 5 and ''n'' − 2 = 3. So there are three possible values for ''k'', namely 1, 2 and 3, and hence three possible apex angles for isosceles triangles: :(2×1×π)/5 = 2π/5 = 72° :(2×2×π)/5 = 4π/5 = 144° :(2×3×π)/5 = 6π/5 = 216° According to the PDN-theorem, A3 is a
regular pentagon In geometry, a pentagon () is any five-sided polygon or 5-gon. The sum of the internal angles in a simple polygon, simple pentagon is 540°. A pentagon may be simple or list of self-intersecting polygons, self-intersecting. A self-intersecting ...
. The three-stage process leading to the construction of the regular pentagon A3 can be performed in six different ways depending on the order in which the apex angles are selected for the construction of the isosceles triangles. :


Proof of the theorem

The theorem can be proved using some elementary concepts from linear algebra. The proof begins by encoding an ''n''-gon by a list of complex numbers representing the vertices of the ''n''-gon. This list can be thought of as a vector in the ''n''-dimensional complex linear space Cn. Take an ''n''-gon ''A'' and let it be represented by the complex vector :''A'' = ( ''a''1, ''a''2, ... , ''a''''n'' ). Let the polygon ''B'' be formed by the free vertices of similar triangles built on the sides of ''A'' and let it be represented by the complex vector :''B'' = ( ''b''1, ''b''2, ... , ''b''''n'' ). Then we have :α( ''a''''r'' − ''b''''r'' ) = ''a''''r''+1 − ''b''''r'', where α = exp( ''i'' θ ) for some θ (here ''i'' is the square root of −1). This yields the following expression to compute the ''b''r ' s: :''b''''r'' = (1−α)−1 ( ''a''''r''+1 − α''a''''r'' ). In terms of the linear operator ''S'' : Cn → Cn that cyclically permutes the coordinates one place, we have :''B'' = (1−α)−1( ''S'' − α''I'' )''A'', where ''I'' is the identity matrix. This means that the polygon ''A''j+1 obtained at the ''j''the step is related to the preceding one ''A''j by : ''A''j+1 '' = ( 1 − ωσj )−1( ''S'' − ωσj ''I'' ) ''A''j '', where ω = exp( 2π''i''/''n'' ) is the ''n''th primitive root of unity and ''σj'' is the ''j''th term of a permutation ''σ'' of the integer sequence ''(1,..., n-2)''. The last polygon in the sequence, ''A''''n''−2, which we need to show is regular, is thus obtained from ''A''0 by applying the composition of all the following operators: : ( 1 − ω''j'' )−1( ''S'' − ωj ''I'' ) for ''j'' = 1, 2, ... , ''n'' − 2 . (These factors commute, since they are all polynomials in the same operator ''S'', so the ordering of the product does not depend on the choice of the permutation ''σ''.) A polygon ''P'' = ( ''p''1, ''p''2, ..., ''p''''n'' ) is a regular ''n''-gon if each side of ''P'' is obtained from the next by rotating through an angle of 2π/''n'', that is, if : ''p''''r'' + 1 − ''p''''r'' = ω( ''p''''r'' + 2 − ''p''''r'' + 1 ). This condition can be formulated in terms of S as follows: :( ''S'' − ''I'' )( ''I'' − ω''S'' ) ''P'' = 0. Or equivalently as :( ''S'' − ''I'' )( ''S'' − ω''n'' − 1 ''I'' ) ''P'' = 0, since ω''n'' = 1. The main result of the Petr–Douglas–Neumann theorem now follows from the following computations. :( ''S'' − ''I'' )( ''S'' − ω''n'' − 1 ''I'' ) ''A''''n'' − 2 :: = ( ''S'' − ''I'' )( ''S'' − ω''n'' − 1 ''I'' ) ( 1 − ω )−1 ( ''S'' − ω ''I'' ) ( 1 − ω2 )−1 ( ''S'' − ω2 ''I'' ) ... ( 1 − ω''n'' − 2 )−1 ( ''S'' − ω''n'' − 2 ''I'' ) ''A''0 :: = ( 1 − ω )−1( 1 − ω2 )−1 ... ( 1 − ω''n'' − 2 )−1 ( ''S'' − ''I'' ) ( ''S'' − ω ''I'' ) ( ''S'' − ω2 ''I'' ) ... ( ''S'' − ω''n'' − 1 ''I'')''A''0 :: = ( 1 − ω )−1( 1 − ω2 )−1 ... ( 1 − ω''n'' − 2 )−1 ( ''S''''n'' − ''I'' ) ''A''0 :: = 0, since ''S''''n'' = ''I''. To show that all the centroids are equal, we note that the centroid ''cA'' of any n-gon is obtained by averagining all the vertices. This means that, viewing ''A'' as an ''n''-component vector, its centroid is given by taking its scalar product :''cA''= ''(E , A)'' with the vector ''E:=(1/n) (1, 1, ..., 1)'' . Taking the scalar product of both sides of the equation : ''A''j+1 '' = ( 1 − ωσj )−1( ''S'' − ωσj ''I'' ) ''A''j '', with ''E'', and noting that ''E'' is invariant under the cyclic permutation operator ''S'', we obtain : ''cAj+1 ''= (E, ''Aj+1'') = ( 1 − ωσj )−1 ( 1 − ωσj )(E, ''Aj'') = (E, ''Aj'') = ''cAj '', so all the centroids are equal.


Notes


References


External links

* * {{DEFAULTSORT:Petr-Douglas-Neumann theorem Theorems about quadrilaterals