Organomolybdenum Compounds

Organomolybdenum chemistry is the chemistry of chemical compounds with Mo-C bonds. The heavier group 6 elements molybdenum and tungsten form organometallic compounds similar to those in organochromium chemistry but higher oxidation states tend to be more common.

Mo(0) and more reduced states

Molybdenum hexacarbonyl is the precursor to many substituted derivatives. It reacts with organolithium reagents to give anionic acyls which can be O-alkylated to give Fischer carbenes.
144px, Structure of (mesitylene)molybdenum tricarbonyl.
Mo(CO)₆ reacts with arenes to give piano-stool complexes such as (mesitylene)molybdenum tricarbonyl. Cycloheptatrienemolybdenum tricarbonyl, which is related to (arene)Mo(CO)₃, reacts with trityl salts to give the cycloheptatrienyl complex:
:(C₇H₈)Mo(CO)₃ + (C₆H₅)₃C⁺ → C₇H₇)Mo(CO)₃sup>+ + (C₆H₅)₃CH
file:CHTMo(CO)3.png, 144px, Structure of Cycloheptatrienemolybdenum tricarbonyl.

Reduction of Mo(CO)₆ gives [Mo(CO)₅]²⁻ which is formally Mo(-II).

CO-free Mo(0) compounds tend to be more reducing and kinetically labile than the carbonyl complexes. Examples include bis(benzene)molybdenum (Mo(C₆H₆)₂) and tris(butadiene)molybdenum. Such compounds can be prepared by metal vapor synthesis and reductive routes from molybdenum(V) chloride.

Mo(II)

Halogenation of Mo(CO)₆ gives Mo(II) carbonyl halides, which are also versatile precursors. One large collection of compounds have the formula (C₅R₅)Mo(CO)₃X, derived from cyclopentadienylmolybdenum tricarbonyl dimer (X = halide, hydride, alkyl).

Treating molybdenum(II) acetate with methyllithium gives Li₄ o₂(CH₃)₈

Mo(IV)

With the formula of the type Cp₂MoX₂ molybdocene dichloride (X = Cl) and molybdocene dihydride (X = H) are both known as are ansa metallocene analogues.
124px, Molybdocene dihydride.

Mo(V) and Mo(VI)

Mo(CH₃)₅, Mo(CH₃)₆, and salts of o(CH₃)₇sup>− are known.

Oxo and imide (RN=) ligands are found in several high oxidation state organomolybdenum compounds. The complexes (C₅R₅)MoO₂X are illustrative. Schrock's Mo-based olefin metathesis catalysts feature molybdenum(VI) centers supported by alkoxide, alkylidene, and imido ligands.

Molybdenum neopentylidyne complexes endowed with sterically demanding phenolates or branched fluorinated alkoxides are catalysts for alkyne metathesis. However, preparation of these catalysts is problematic by the standard Schrock procedure. The trisalkoxide species 17 is active at room temperature.

The related complex precursor complex 18 provides even greater opportunities, which is originally designed for the stoichiometric cleavage of dinitrogen. In fact, when treating complex 18 with DCM in toluene, the major species formed is a methylidyne complex 19 and a monochloride compound 20. More importantly, the combination of complex 18 and DCM tolerates numerous polar groups. For instance, basic amines and sulfides, which deactivate the more Lewis acidic complex such as Schrock complex. Following by this original discovery, Moore and co-workers tried higher gem-dichlorides RCHCl₂ as activating agents to increase the catalyst lifetime. To reconvert the chloride byproduct, they added magnesium in reaction. Moreover, after ligand exchange to an electron deficient ligand such as ''p''-nitrophenol, gave access to a very active catalyst 22, which was effective in many applications, particularly in polymer chemistry and material science. On the other hand, alcoholysis of 21 with a tridentate ligand will lead to longer lifetime and better substrate scope.

Despite the favorable characteristics of such catalysts, complex 18 must be handled with great care. This compound is not only very sensitive to oxidation and hydrolysis, but even reactive enough to cleave molecular nitrogen.

Molybdenum nitride complexes with Ph₃SiO ligands are practical and tolerant precatalyst for alkyne metathesis. This result implied that molybdenum alkylidynes endowed with Ph₃SiO ligands must be very active. To further increase the feasibility, stability and activity of these catalysts, they came up with an independent route to directly prepare the alkylidynes instead of their nitrile counterparts. By complexation with 1,10-phenanthroline, an air-stable compound 27 can be formed as precatalyst, which can be activated easily by MnCl₂ or ZnCl₂ in solvents. As shown below, this route is highly scalable and practical.

Organotungsten compounds

Tungsten analogues of almost all organoMo compounds are known. Some notable examples include hexamethyltungsten and analogues of Schrock olefin metathesis catalysts.

Many tungsten-based alkyne metathesis catalysts are of the general type ₃W≡CR Activity is manipulated by the ligands. A typical route to such catalysts entails treatment neopentyl Grignard reagent to tungsten(VI) precursor followed by net alcoholysis of the alkyl ligands. Complex 3 can undergo a ligand exchange with lithium salts to generate Schrock type catalysts (complex 4). Another way to make complex 4 is via cleavage of internal alkyne by W(III) complex, such as 5. Complex 2, as well as 3, is unable to metathesize internal alkynes, the related pathway is shown right. In detail, compound 6 (when X is not OR) will react with two equivalent alkynes to form complex 7. Complex 7 will undergo an "associative path" to generate a metallabenzene complex 8. It will decompose to polymerized compounds or a cyclopentadienyl complex with a formally reduced tungsten center. Tungstenocenes, or tungsten-containing metallocenes, may be formed from these cyclopentadienyl complexes.

The formal 12-electron count of the W(VI) center in Schrock catalyst represents an appreciable Lewis acidity, which seriously limits the scope of these catalysts. For example, Schrock catalyst is unable to metathesize substrates containing donor or basic sites such as amines, thio ethers or crown ether segments. Acid-sensitive groups such as acetals can be destroyed. Replacement of tert-butoxide ligands by fluorinated alkoxides increase the Lewis acidic character. To reach a balance, it is proposed that a heteroleptic push/pull environment around the tungsten center will work.(as shown below) For example, complex 13 is highly active (with loading 1-2 mol% being sufficient) and compatible with many functional groups.

Applications

Mo-based catalysts are useful for olefin metathesis.

Trisamidomolybdenum(VI) alkylidyne complexes catalyze alkyne metathesis.

In the Kauffmann olefination, molybdenum(III) chloride and methyllithium form an organometallic complex capable of carbonyl olefination.

References

{{ChemicalBondsToCarbon

*