The Nikon 1-mount is a type of interchangeable

lens mount A lens mount is an interface – mechanical and often also electrical – between a photographic camera body and a lens. It is a feature of camera systems where the System camera, body allows interchangeable lenses, most usually the rangefinder ...

developed by

Nikon (, ; ) is a Japanese optics and photographic equipment manufacturer. Nikon's products include cameras, camera lenses, binoculars, microscopes, ophthalmic lenses, measurement instruments, rifle scopes, spotting scopes, and equipment related to S ...

for its

camera A camera is an instrument used to capture and store images and videos, either digitally via an electronic image sensor, or chemically via a light-sensitive material such as photographic film. As a pivotal technology in the fields of photograp ...

s. The 1-mount was first introduced on the

Nikon 1 series The Nikon 1 series is a discontinued camera line from Nikon, originally announced on 21 September 2011. The cameras utilized Nikon 1-mount#Lenses, Nikon 1-mount lenses, and featured 1" Nikon CX format, CX format sensors. The series included the ...

in 2011, and features a

bayonet mount A bayonet mount (mainly as a method of mechanical attachment, such as fitting a lens to a camera using a matching lens mount) or bayonet connector (for electrical use) is a fastening mechanism consisting of a cylindrical male side with one ...

Compatibility to
Nikon F-mount The Nikon F-mount is a type of interchangeable lens mount developed by Nikon for its 35mm format single-lens reflex cameras. The F-mount was first introduced on the Nikon F camera in 1959, and features a three-lug bayonet mount with a 44mm thro ...

The F-mount adapter FT1 enables the use of all F-mount lenses especially with integrated autofocus motor. The FT1 adapter mounts and meters with all AI-P, AF, AF-S, D and G lenses and compatibles providing autofocus with all lenses with integrated autofocus motor. It further mounts Pre-AI, AI, AI-S and E lenses without metering as well as lenses which jut out the F-mount (needing mirror lock-up on cameras with mirror). Also although not recommended, it is used with

teleconverter A teleconverter (sometimes called tele extender) is a secondary lens mounted between a camera and a photographic lens which enlarges the central part of an image obtained by the lens. For example, a 2× teleconverter for a 35 mm camera, 35 ...

s for extreme

telephoto A telephoto lens, also known as telelens, is a specific type of a long-focus lens used in photography and cinematography, in which the physical length of the lens is shorter than the focal length. This is achieved by incorporating a special lens ...

Lenses

Zoom lenses

Power zoom lenses

These lenses have an in-lens motor to operate the focal length control, aimed at making smooth zooms during videography.

Prime lenses

All-weather lens

Lenses are optically identical to their non-sealed counterparts and use the same bayonet, but have an extended flange to ensure a watertight seal with the Nikon 1 AW1 body.

Third party lens

Future lenses

At the Nikon 1 launch in October 2011, Nikon showcased seven prototype lenses. As of October 2012, five of these prototypes have become official. Nikon discontinued the Nikon 1 line in 2018, including cancelling any future lens releases.

References

External links

Advanced Camera with Interchangeable Lens Nikon 1 J1 / V1
Nikon
Full list of 1 Nikkor lenses at Nikon USA
{{Nikkor lenses, Nikon 1-mount lenses Lens mounts

Compatibility to Nikon F-mount The Nikon F-mount is a type of interchangeable lens mount developed by Nikon for its 35mm format single-lens reflex cameras. The F-mount was first introduced on the Nikon F camera in 1959, and features a three-lug bayonet mount with a 44mm thro ...