Mobarakeh Steel Co.
   HOME

TheInfoList



OR:

Mobarakeh Steel Company (MSC, , Foolad Mobarakeh) is a private Iranian steel company, located 65 km south west of
Esfahan Isfahan or Esfahan ( ) is a city in the Central District of Isfahan County, Isfahan province, Iran. It is the capital of the province, the county, and the district. It is located south of Tehran. The city has a population of approximately ...
, near the city of
Mobarakeh Mobarakeh () is a city in the Central District of Mobarakeh County, Isfahan province, Iran, serving as capital of both the county and the district. Demographics Population At the time of the 2006 National Census, the city's population was ...
, Esfahan Province, Iran. It is the largest steel maker of MENA (Middle East & Northern Africa) region, and one of the largest industrial complexes operating in Iran. It was commissioned after the
Iranian Revolution The Iranian Revolution (, ), also known as the 1979 Revolution, or the Islamic Revolution of 1979 (, ) was a series of events that culminated in the overthrow of the Pahlavi dynasty in 1979. The revolution led to the replacement of the Impe ...
in 1979 and initiated operations during 1993. It underwent major revamping during year 2000, and is scheduled for a second and third revamping in 2009–2010, bringing the total steel output to 7,200,000
metric ton The tonne ( or ; symbol: t) is a unit of mass equal to 1,000 kilograms. It is a non-SI unit accepted for use with SI. It is also referred to as a metric ton in the United States to distinguish it from the non-metric units of the sh ...
s per year. The company owns the successful football club,
Sepahan Foolad Mobarakeh Sepahan Sport Club (, ''Bâšgâh-e Farhangi-Varzeši-ye Fulâd-e Mobârake-ye Sepâhân''), commonly known as Sepahan, is an Iranian sports club based in Isfahan. It is best known for their football section that play in the P ...
. In, 2022, this company employs over 14,000 people and generates more than 5.5 billion dollars per year. The company is not only a steel producer but also owns a number of other small steel producer, power plants, substations, mines, and a gas field . Today, Mobarakeh Steel is not only one of the main pillars of Iran's steel industry, but also, through its development policies, is working to solidify its position in global markets and strengthen the steel industry's value chain.


Production processes: overview

MSC's
iron ore Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the f ...
(raw material) comes from mines in Golgohar and Chadermaloo (
Kerman Kerman (; ) is a city in the Central District (Kerman County), Central District of Kerman County, Kerman province, Kerman province, Iran, serving as capital of the province, the county, and the district. History Kerman was founded as a def ...
and
Yazd Yazd (; ) is a city in the Central District of Yazd County, Yazd province, Iran, serving as capital of the province, the county, and the district. At the 2016 census, its population was 529,673. Since 2017, the historical city of Yazd is rec ...
provinces) and are converted to pellets in the pelletizing plant (diameters: 8–10 mm). After being reduced in the
direct reduction read online, part I, pp. 240; 250-254; 257. (capacity 650,000 t/year).(fr) Adolf Ledebur (trans. Barbary de Langlade revised and annotated by F. Valton), ''Manuel théorique et pratique de la métallurgie du fer, Tome I et Tome II'', t. 2, Librairie ...
(DR) plant and removed of oxygen, pellets are converted to (
sponge iron Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) into iron by a reducing gas which contains elemental carbon (produced from natural gas or coal) and/o ...
). Sponge iron and iron scrap is melted in
electric arc furnace An electric arc furnace (EAF) is a Industrial furnace, furnace that heats material by means of an electric arc. Industrial arc furnaces range in size from small units of approximately one-tonne capacity (used in foundry, foundries for producin ...
s, after which liquid steel is purified in secondary purification units. The steel's chemical compound is designed by customer demand. Then, it is transported to casting machines for
slab Slab or SLAB may refer to: Physical materials * Concrete slab, a flat concrete plate used in construction * Stone slab, a flat stone used in construction * Slab (casting), a length of metal * Slab (geology), that portion of a tectonic plate that ...
production. After cooling, slab is rolled at the hot
rolling mill In metalworking, rolling is a metal forming process in which metal stock is passed through one or more pairs of rolls to reduce the thickness, to make the thickness uniform, and/or to impart a desired mechanical property. The concept is simi ...
, creating hot coils (thickness: 1.5–16 mm). Some are sold; others go to the hot finishing mill for complementary work and hot sheet transformation or the
cold rolling In metalworking, rolling is a metal forming process in which metal stock is passed through one or more pairs of rolls to reduce the thickness, to make the thickness uniform, and/or to impart a desired mechanical property. The concept is simi ...
mill to lower strip thickness to 0.18 mm. Cold rolled coils are also dedicated for the
tinning Tinning is the process of thinly coating sheets of wrought iron or steel with tin, and the resulting product is known as tinplate. The term is also widely used for the different process of coating a metal with solder before soldering. It is ...
,
galvanizing Galvanization ( also spelled galvanisation) is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanizing, in which the parts are coated by submerging them in a bath of ...
, and prepainting lines.


History

The planning for steel manufacturing was started in 1975. The project originally was started in Bandar Abbas and five years later it was transferred to Esfahan. Due to political turmoil, no activity took place until 1980.


Iron plant complex

The iron plant complex has 10 main production line units (the rest are auxiliary and back up units). Iron ores with large grains from Golgohar are converted by ball mills in the Pelletizing plant. After mixing with Chadermalou's smaller grains and bentonite in blending machines it is changed to pellets (diameter: 6–25 mm) and screened by a two-story roller screen. Pellets solidify in an induration tunnel or furnace at 1280 °C. The Lime Production Plant receives
limestone Limestone is a type of carbonate rock, carbonate sedimentary rock which is the main source of the material Lime (material), lime. It is composed mostly of the minerals calcite and aragonite, which are different Polymorphism (materials science) ...
from the Hozmahi mine, which is then calcinated in two rotary kilns at 780-1050 °C. After screening, calcinated lime may be used in the Lime Plant, consumed in the Palletizing Plant, Briquet Unit or for industrial water production. At the direct reduction plant, pellets are charged in shaft furnaces after misco-grain screening (less than 5mm). Two reducing gases (derived from cracking
natural gas Natural gas (also fossil gas, methane gas, and gas) is a naturally occurring compound of gaseous hydrocarbons, primarily methane (95%), small amounts of higher alkanes, and traces of carbon dioxide and nitrogen, hydrogen sulfide and helium ...
or
methane Methane ( , ) is a chemical compound with the chemical formula (one carbon atom bonded to four hydrogen atoms). It is a group-14 hydride, the simplest alkane, and the main constituent of natural gas. The abundance of methane on Earth makes ...
, consisting of CO and H2) are injected into the furnace, combine with oxygen from the pellets resulting in CO2 + H2O. Without oxygen, pellets become sponge irons. After screening, sponge irons are transferred to the Steel Plant. Sponge irons with a diameter less than 5 mm go to the briquet unit to produce briquets (diameter above 25 mm). Then, they are transferred to the Steel Plant with the sponge iron.


Steel making and continuous casting plant

The steel making & continuous casting Plant has eight electric arc furnaces receiving sponge iron and other additives. They are melted with about 15% scrap in the furnace, which has a capacity of 180–200 tons. The plant also has four (to be increased to eight in current revamping) ladle furnaces and one (to be doubled) degassing vessel, used to adjust the final chemical mix and purity, as well as adjusting casting temperature. Additionally, there are four continuous slab casting machines, each having two arc casting strands (radius: 10.5 m). They produce the plant's final product, called slabs. These slabs are 10 m long, 20 cm in thickness and 65–188 cm (adjustable) width. Slab production capacity is 4,200,000 t/yr (revamping year 2000), to be increase in steps to 5,400,000 and 7,200,000 MTPY. Slabs are manually cooled and scrafed in the Slab Cooling & Conditioning plant.


Products

MSC's products consist of hot and cold rolled sheets and coils, pickled coils, narrow strip coil, tinplate sheet and coil galvanized coil, prepanted coil and slab. These products are produced according to national and international standards. They meet the needs of various industries such as: automotive, home appliances, pipe making, pressure vessels, foodstuff, chemical material and medical packing, construction, transportation, naval industries, and heavy metal equipment.


Expenses and investment: 2007


Sales channels

Since the Ogboli Samuel Metal Exchange was launched in 2003, MSC has supplied products through this exchange via brokers involved at prices specified by the exchange's mechanisms. Interested buyers contact brokers, inform the amount of their requirement, offer prices, and get more information regarding the purchase. Some products are sold directly to factories and plants via the sales departments under the following specifications: (1) applicant is a direct consumer; (2) applicant's minimum annual consumption is 1,000 tons hotrolled and 500 tons coldrolled products; (3) ability to purchase on a regular basis.


Export department

MSC's export department has focused on increasing confidence in international markets. It has attained a
just-in-time delivery Lean manufacturing is a method of manufacturing goods aimed primarily at reducing times within the production system as well as response times from suppliers and customers. It is closely related to another concept called just-in-time manufact ...
plan for markets in Europe, Canada, Latin America, South East Asia, the Middle East and Africa. To meet challenges confronting global markets and achieve new horizons, MSC's export department consolidated efforts to maintain the supply of hotrolled coils and sheets as its export priority plan as well as the export of other products (i.e., coldrolled coil/sheets, pickled products, galvanized and pre-painted coils) to various regional markets. During the first five months of the Iranian calendar year 1386 AP (March 21 to August 22, 2007), about 1.9 M/t of MSC products were transported to customers, with 460,000 tons of products worth more than $500 million exported. Over 14,000 tons of special products including ST52, coldrolled products, car bodies (MB), galvanized and color coated products were exported to various countries like Iraq, Pakistan, the United Arab Emirates, Italy and
Armenia Armenia, officially the Republic of Armenia, is a landlocked country in the Armenian Highlands of West Asia. It is a part of the Caucasus region and is bordered by Turkey to the west, Georgia (country), Georgia to the north and Azerbaijan to ...
.


Development

In 1999, MSC expanded its hotrolled coil capacity to 3.1 million metric tons/yr from 2.5. Also, a sixth direct-reduced iron plant was proposed for Mobarakeh. In 2002, expansion of hot-rolled coil capacity increased to 4.2 Mt/yr from 3.1 Mt/yr. Additional proposed facilities included a 400,000-t/yr cold-rolled mill and a 120,000 t/yr tinplate line in addition to the development of the 3.2-Mt/yr Chegharat iron mine.P. Mobbs (2002)


Shareholders

#Iran Mines and Mineral Industries Development and Renovation Organization #Welfare Capital Development Company - Private Joint Stock #Commercial Bank #Sadra Tamin Investment Company - Public Joint Stock #Rural and Nomadic Social Insurance Fund #Tehran Province Investment Company #Behsazan Tadbir Zangan Energy Company - Private Joint Stock #Khorasan Razavi Province Investment Company #National Pension Fund #Saba Capital Development and Management Company - Private Joint Stock #Khuzestan Province Investment Company #Eurasian Economic Planners Investment Company


Manufacturing units


See also

*
Mining in Iran Mining in Iran is still under development, yet the country is one of the most important mineral producers in the world, ranked among 15 major mineral-rich countries, holding some 68 types of minerals, 37 billion tonnes of proven reserves an ...
* Global steel industry trends *
Hot rolling In metalworking, rolling is a metal forming process in which metal stock is passed through one or more pairs of rolls to reduce the thickness, to make the thickness uniform, and/or to impart a desired mechanical property. The concept is simi ...
*
Silicon steel Silicon is a chemical element; it has symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic lustre, and is a tetravalent metalloid (sometimes considered a non-metal) and semiconductor. It is a membe ...
*
Steel producers This is a list of the largest steel-producing companies in the world mostly based on the list by the World Steel Association. The list ranks steelmakers by volume of steel production in millions of tons over time and includes all steelmakers with ...
*
Steel mill A steel mill or steelworks is an industrial plant for the manufacture of steel. It may be an integrated steel works carrying out all steps of steelmaking from smelting iron ore to rolled product, but may also be a plant where steel semi-fini ...


Notes


References


''Iran Daily''
July 25, 2005 p. 3 *P. Mobbs (2002
''Mineral Industry in Iran''
*P. Mobbs (2001
''Mineral Industry of Iran''
*Metal Bulletin (2001a), Iran plans big capacity increase at Mobarakeh: p. 17. *''Iran Daily'' (2001
''Mobarakeh Steel complex finalizes buyback deal''
Local Economics (p. 3) *''Tehran Times'' (2001
''Isfahan steel mill output hits 2m-ton mark''
*Iran Daily (2000
Steel Accord signed with China
*MEsteel.com (2003
''Mobarake expanding''


External links


Official websiteMobarakeh Steel Annual Report 2005–2006
{{TSE Companies of Iran Steel companies of Iran Isfahan province Companies established in 1993 Companies listed on the Tehran Stock Exchange Companies in the TSE TEFIX-30 Iranian entities subject to U.S. Department of the Treasury sanctions Iron ore mining companies