The Metrication Board was a

non-departmental public body In the United Kingdom, non-departmental public body (NDPB) is a classification applied by the Cabinet Office, Treasury, the Scottish Government and the Northern Ireland Executive to public sector organisations that have a role in the process of ...

that existed in the United Kingdom to promote and co-ordinate metrication within the country. It was set up in 1969, four years after the metrication programme was announced, and wound down in 1981.

Prelude to metrication

The question of whether or not to convert British trade and industry to

metric Metric or metrical may refer to: * Metric system, an internationally adopted decimal system of measurement * An adjective indicating relation to measurement in general, or a noun describing a specific type of measurement Mathematics In mathem ...

was the subject of a UK Government White Paper in 1951, itself the result of the Hodgson Committee Report of 1949 which unanimously recommended compulsory metrication and currency decimalisation within ten years. The report said "The real problem facing Great Britain is not whether to adhere either to the Imperial or to the metric system, but to maintain two legal systems or to abolish the Imperial." The report also recommended that any change should be done in concert with the

Commonwealth A commonwealth is a traditional English term for a political community founded for the common good. Historically, it has been synonymous with " republic". The noun "commonwealth", meaning "public welfare, general good or advantage", dates from th ...

(former Empire) and the US, that the UK adopt a decimal currency and that the UK and US harmonise their respective definitions of the yard using the metre as a reference. Although most of the Hodgson Report was rejected at the time as being premature, within a decade and a half changing patterns in British trade meant that in 1963 a poll by the British Standards Institute (BSI) revealed that the majority of its members favoured a transition to the metric system. Two years later, after taking a poll of its members, the Confederation of British Industry informed the government that they favoured the adoption of the metric system, though some sectors emphasised the need for a voluntary system of adoption. The metrication programme in the United Kingdom was to have five phases: announcement of policy; metrication of the documentation for materials, specification and engineering design; metrication of engineering-related industries; initiation of a national education programme in the schools and metrication of the wholesale, retail and consumer industries.

Establishment of the Board

In March 1966 the arliamentaryStanding Joint Committee on Metrication was appointed and on 26 July 1968, when accepting the committee's report, the government announced that: :*The target date for the completion of the metrication programme was 1975. :*An advisory Metrication Board would be set up. :*Legislation would be passed where necessary. :*There would be no compensation – costs would be borne where they fell. The Metrication Board was set up with a mandate to "consult, advise, inform, stimulate and coordinate". Its mandate specifically excluded a campaigning role. The board held its first meeting in May 1969 under the chairmanship of Lord Ritchie-Calder when eight committees were set up to deal with the most important sectors of British Industry: :*Agriculture, Forestry, Fisheries and Land :*Distribution, Food and Consumer Goods Industries :*Education and Industrial Training :*Engineering Industries :*Fuel and Power Industries :*Industrial Materials and Construction Industries :*Transport and Communications Industries :*Information Policy By the time the board was set up, much of the groundwork, especially rewriting of many British Standards using metric units had been done and many of the industries that stood to benefit from metrication had already metricated, or had a metrication programme in progress. Traditionally the British Government had imposed little regulation on British industry – standards were usually defined by the industry itself, often in conjunction with the

British Standards Institution The British Standards Institution (BSI) is the national standards body of the United Kingdom. BSI produces technical standards on a wide range of products and services and also supplies certification and standards-related services to busines ...

. Legislation relating to units of measure were normally directed at trade with industry being allowed to develop its own standards. After the general election and change of government in 1970, the incoming government announced its intention to continue to "encourage these voluntary developments, including the use of metric specifications for public purposes as soon as consultation with the suppliers shows this to be practicable".

White paper

In 1972, three years before the target date for completion of the metrication programme, the Metrication Board published a

white paper A white paper is a report or guide that informs readers concisely about a complex issue and presents the issuing body's philosophy on the matter. It is meant to help readers understand an issue, solve a problem, or make a decision. A white pape ...

laying out the political and economic rationale behind the adoption of the metric system, identifying the practicalities and potential difficulties of the changeover and outlining the programme. The report emphasised that unlike currency

decimalisation Decimalisation or decimalization (see spelling differences) is the conversion of a system of currency or of weights and measures to units related by powers of 10. Most countries have decimalised their currencies, converting them from non-decimal ...

, the emainder ofthe programme would be on a phased basis with no M-Day. The report also emphasised the need for co-ordination between the various sectors as all were interdependent and thus that partial metrication was undesirable.

Activities of the Board

Completion of metrication as cited in the Final report of the Metrication Board was: *1970 – Electric Cables,

British Aerospace British Aerospace plc (BAe) was a British aircraft, munitions and defence-systems manufacturer. Its head office was at Warwick House in the Farnborough Aerospace Centre in Farnborough, Hampshire. Formed in 1977, in 1999 it purchased Marconi ...

designs,

London Metal Exchange The London Metal Exchange (LME) is a futures and forwards exchange with the world's largest market in standarised forward contracts, futures contracts and options on base metals. The exchange also offers contracts on ferrous metals and precious ...

, Flat glass. *1971 – Paper and Board,

National Coal Board The National Coal Board (NCB) was the statutory corporation created to run the nationalised coal mining industry in the United Kingdom. Set up under the Coal Industry Nationalisation Act 1946, it took over the United Kingdom's collieries on "v ...

designs, Pharmaceuticals. *1972 – Steel industry, Building regulations *1974 – Textile and wool transactions, clothing (dual units) *1975 – Retail trade in fabrics and floor coverings, Post office tariffs, medical practice *1976 – Bulk sales of petroleum, agriculture and horticulture *1977 – Livestock auctions *1978 – Solid fuel, cheese wholesaling, London Commodity Market *Metrication of retail pre-packaged foodstuffs was phased in during 1977 and 1978

Winding up of the Board

Following the 1979 general election and another change of government, Sally Oppenheim, described by the last director of the Metrication Board, Jim Humble, as having "been almost the lone but persistent critic of the metric programme" was appointed

Minister of State Minister of State is a title borne by politicians in certain countries governed under a parliamentary system. In some countries a Minister of State is a Junior Minister of government, who is assigned to assist a specific Cabinet Minister. In ...

for Consumer Affairs. On 14 November 1979, six months after her appointment, she announced that no more statutory orders would be made regarding metrication – continued progress would be on a voluntary basis. The following year the Metrication Board was wound up, one of the 457

Quango A quango or QUANGO (less often QuANGO or QANGO) is an organisation to which a government has devolved power, but which is still partly controlled and/or financed by government bodies. The term was originally a shortening of "quasi-NGO", where N ...

s that were wound up in the "Quango bonfire" of 1979–81. The author of the final report of the Metrication Board wrote "Today metric units are used in many important areas of British life – including education; agriculture; construction; industrial materials; much of manufacturing; the wholesaling of petrol, milk, cheese and textiles; fatstock markets and many port fish auctions, nearly all the principal prepacked foods; posts and telecommunications: most freight and customs tariffs; all new and revised Ordnance Survey maps; and athletics. Nevertheless, taken as a whole, Britain is far from being wholly metric." The report identified major areas that had not yet been metricated as being the retail petrol trade (metricated early 1980s), retail sale of loose goods (metricated in 2000) and road signs (as of 2020, only weights are metricated, but not distance).

Comparable institutions

Similar bodies were instituted in other jurisdictions around the world: * Australia – Metric Conversion Board (1970) * Canada – the Metric Commission *Hong Kong – the Metrication Committee *

New Zealand New Zealand ( mi, Aotearoa ) is an island country in the southwestern Pacific Ocean. It consists of two main landmasses—the North Island () and the South Island ()—and over 700 List of islands of New Zealand, smaller islands. It is the ...

– Metric Advisory Board (1970) * South Africa – Metrication Advisory Board (1967) * United States of America – the United States Metric Board

References

* * {{Reflist, refs= Metrication Board White Paper: para 45 Metrication Board Final Report: para 1.6 Metrication Board Final Report para 1.10 Metrication Board White Paper; para 12, 60 Metrication Board White Paper: para 47 Metrication Board White Paper; para 57 Final Report of the Metrication Board, Appendix A {{cite web , url = http://www.cleavebooks.co.uk/dictunit/dictunit2.htm , title = Historical Perspectives on Metrication by Jim Humble ast Director of the UK Metrication Board , accessdate = 20 March 2012 {{cite report , url = http://eric.ed.gov/PDFS/ED104725.pdf , title = Going Metric: An analysis of experiences in five nations and their implications for U.S. Educational Planning , year = 1974 , first1 = Albert B , last1 = Chalupsky , first2 = Jack J , last2 = Crawford , first3 = Edwin M , last3 = Carr , page = 23 , accessdate = 19 October 2011 , id = AIR-41800-2/74-FR , publisher = U.S. Department of Health, Education & Welfare, Department of Health {{cite web , url = https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19770008274_1977008274.pdf , title = U.S. Metric Study Mission to the United Kingdom and the Federal Republic of Germany , date = October 1976 , first = PN , last = Vlannes , id = NASA-TM-X-74307 , publisher = National Aeronautics and Space Administration (NASA) , location = Washington DC {{cite hansard , jurisdiction=United Kingdom , title=Metrication , url= http://hansard.millbanksystems.com/lords/1970/nov/30/metrication , house= House of Lords , date= 30 November 1970 , column_start= 326 , column_end= 347 {{cite web , url=http://gsi.nist.goc/global/docs/GCR%2079-172.pdf , title=Standards systems in Canada, the U.K., West Germany and Denmark: An overview , first=David , last=Hemenway , publisher= nited StatesNational Bureau of Standards , date=April 1979 , location=Washington DC {{dead link, date=June 2017 , bot=InternetArchiveBot , fix-attempted=yes {{cite journal , url = http://www.ntu.ac.uk/nls/document_uploads/83372.pdf , journal = The Trent Law Journal , first = Peter , last = Holland , title = The Quango in Britain , year = 1981 , volume = 5 , pages = 1–9 , accessdate = 13 March 2012 {{cite book , publisher = Metric Conversion Board , title = Official Year Book of the Commonwealth of Australia , page = 1025 , year = 1972 {{cite encyclopedia , url = http://www.thecanadianencyclopedia.com/articles/metric-conversion , title = Metric Conversion , encyclopedia = The Canadian Encyclopedia , first1 = N , last1 = Ganapathy , year = 2012 , accessdate = 23 April 2012 {{cite web , url =https://www.nist.gov/pml/wmd/metric/upload/1136a.pdf , title = The United States and the Metric System , publisher = National Institute of Standards and Technology (NIST) , accessdate = 23 April 2012 , location = Gaithersburg, Maryland , id = NIST LC1136 , date = October 1997 Metrication in the United Kingdom Defunct non-departmental public bodies of the United Kingdom government 20th century in the United Kingdom 1969 establishments in the United Kingdom 1981 disestablishments in the United Kingdom