The Maple Leaf 54 is a Canadian

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by

Stan Huntingford Stan or STAN may refer to: People * Stan (given name), a list of people with the given name ** Stan Laurel (1890–1965), English comic actor, part of duo Laurel and Hardy * Stan (surname), a Romanian surname * Stan! (born 1964), American author, ...

as a

motorsailer A motorsailer is a type of motor-powered Sail, sailing vessel, typically a yacht, that can derive power from its sails or engine, independently from each other during moderate seas or winds. A motorsailer may have a sail-to-engine power ratio in ...

and first built in 1978.

Production

The design was built by Cooper Enterprises in

Port Coquitlam Port Coquitlam ( ) is a city in British Columbia, Canada. It is one of 21 municipalities comprising Metro Vancouver. Located east of Vancouver, it is on the north bank of the confluence of the Fraser River and the Pitt River. Coquitlam borders ...

British Columbia British Columbia is the westernmost Provinces and territories of Canada, province of Canada. Situated in the Pacific Northwest between the Pacific Ocean and the Rocky Mountains, the province has a diverse geography, with rugged landscapes that ...

, starting in 1978, but the company went out of business in 1990 and it is now out of production.

Design

The Maple Leaf 54 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...

, built predominantly of

fibreglass Fiberglass (American English) or fibreglass ( Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass c ...

, with wood trim. It has a

cutter rig A cutter is any of various types of watercraft. The term can refer to the rig (sail plan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutt ...

, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a

reverse transom In some boats and ships, a transom is the aft transverse surface of the hull that forms the stern of a vessel. Historically, they are a development from the canoe stern (or "double-ender") wherein which both bow and stern are pointed. Transom ...

, a

skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...

-mounted

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...

controlled by a

wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...

. It displaces and carries of lead ballast. The boat has a draft of with the standard keel. The boat is fitted with a Ford Lehman

diesel engine The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...

of for docking and manoeuvring. The design has sleeping accommodation for six people, with two berths in the bow cabin, two more just aft of the bow cabin and an aft cabin with a double berth. The

galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...

is located on the port side just forward of the

companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly i ...

ladder. The galley is L-shaped and is equipped with a three-burner stove and a double sink. A navigation station is opposite the galley, on the starboard side. There are two heads, one just aft of the bow cabin on the starboard side and one on the starboard side in the aft cabin. The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...

of .

Operational history

In 1984 review in ''Yachting'' magazine, Chris Caswell wrote, "the Maple Leaf series (48, 50, 54, 56 and 68) is distinctive for powerful hulls, graceful deckhouses, and center cockpits.

References

{{Cooper Enterprises Keelboats 1970s sailboat type designs Sailing yachts Motorsailers Sailboat type designs by Stan Huntingford Sailboat types built by Cooper Enterprises

Production

Design

Operational history

See also

References