A machine-tool dynamometer is a multi-component

dynamometer A dynamometer or "dyno" for short, is a device for simultaneously measuring the torque and rotational speed ( RPM) of an engine, motor or other rotating prime mover so that its instantaneous power may be calculated, and usually displayed by t ...

that is used to measure

force In physics, a force is an influence that can change the motion of an object. A force can cause an object with mass to change its velocity (e.g. moving from a state of rest), i.e., to accelerate. Force can also be described intuitively as a ...

s during the use of the

machine tool A machine tool is a machine for handling or machining metal or other rigid materials, usually by cutting, boring, grinding, shearing, or other forms of deformations. Machine tools employ some sort of tool that does the cutting or shaping. All ...

. Empirical calculations of these forces can be cross-checked and verified experimentally using these

s. With advances in technology, machine-tool dynamometers are increasingly used for the accurate measurement of forces and for optimizing the machining process. These multi-component forces are measured as an individual component force in each co-ordinate, depending on the coordinate system used. The forces during machining are dependent on depth of cut, feed rate, cutting speed, tool material and geometry, material of the work piece and other factors such as use of lubrication/cooling during machining.

Types

Lathe A lathe () is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling, drilling, deformation, facing, and turning, with tools that are applied to the workpiece to ...

Drill A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically decreasing in popularity and cordless battery-powered ones proliferating due to ...

Milling Milling may refer to: * Milling (minting), forming narrow ridges around the edge of a coin * Milling (grinding), breaking solid materials into smaller pieces by grinding, crushing, or cutting in a mill * Milling (machining), a process of using rota ...

Grinding Grind is the cross-sectional shape of a blade. Grind, grinds, or grinding may also refer to: Grinding action * Grinding (abrasive cutting), a method of crafting * Grinding (dance), suggestive club dancing * Grinding (video gaming), repetitive and ...

References

* Machining Technology, Machine Tools and Operations Helmi A. Youssef and Hassan El-Hofy CRC Press 2008 Pages 371–390 Print eBook
Machine Tool Dynamometers

External links

DOI.org
A book containing information on Machine Tool Dynamometers by

Springer Springer or springers may refer to: Publishers * Springer Science+Business Media, aka Springer International Publishing, a worldwide publishing group founded in 1842 in Germany formerly known as Springer-Verlag. ** Springer Nature, a multinationa ...

{{DEFAULTSORT:Machine Tool Dynamometer Machine tools Dynamometers