Low insertion force (LIF) is a technology used in

integrated circuit An integrated circuit (IC), also known as a microchip or simply chip, is a set of electronic circuits, consisting of various electronic components (such as transistors, resistors, and capacitors) and their interconnections. These components a ...

sockets that are designed so the force required to insert or remove a package is low. Initially, the LIF connectors were designed as a cheaper alternative compared to

zero insertion force Zero insertion force (ZIF) is a type of IC socket or electrical connector that requires very little (but not literally zero) force for insertion. With a ZIF socket, before the IC is inserted, a lever or slider on the side of the socket is m ...

(ZIF) connectors, to facilitate programming and testing of equipment. Compared with standard IC sockets, they achieve a lower friction force between the contacts of the device and the socket, making insertion and removal of the device easier, while at the same time eliminating the need for the complex mechanism that is used in ZIF sockets. The disadvantages of LIF connectors are that the grip force between the contacts is lower, and the contacts can oxidize faster and decrease the lifespan of the connector. With the advent of frequent changes in PC processors, a need arose for these systems. Intel introduced the LIF socket system, in which the processor is inserted into the socket, rather than fixed by a lever. This type of socket was used for some types of 386s and early 486s. This type of socket has been replaced by the ZIF socket, although LIF sockets are now used in modern 1.8" hard disks.

References

Further reading