A skidder is any type of

heavy vehicle Heavy may refer to: Measures * Heavy, a characterization of objects with substantial weight * Heavy, a wake turbulence category used by pilots and air traffic controllers to refer to aircraft with a maximum takeoff mass of 136,000 kgs or mo ...

used in a

logging Logging is the process of cutting, processing, and moving trees to a location for transport. It may include skidder, skidding, on-site processing, and loading of trees or trunk (botany), logs onto logging truck, truckstrees In botany, a tree is a perennial plant with an elongated stem, or trunk, usually supporting branches and leaves. In some usages, the definition of a tree may be narrower, e.g., including only woody plants with secondary growth, only p ...

out of a forest in a process called "skidding", in which the logs are transported from the cutting site to a landing. There they are loaded onto trucks (or railroad cars or a

flume A flume is a human-made channel for water, in the form of an open declined gravity chute whose walls are raised above the surrounding terrain, in contrast to a trench or ditch. Flumes are not to be confused with aqueducts, which are built to t ...

), and sent to the mill. One exception is that in the early days of logging, when distances from the timberline to the mill were shorter, the landing stage was omitted altogether, and the "skidder" would have been used as the main road vehicle, in place of the trucks, railroad, or flume. Modern forms of skidders can pull trees with a

cable Cable may refer to: Mechanical * Nautical cable, an assembly of three or more ropes woven against the weave of the ropes, rendering it virtually waterproof * Wire rope, a type of rope that consists of several strands of metal wire laid into a hel ...

and

winch A winch is a mechanical device that is used to pull in (wind up) or let out (wind out) or otherwise adjust the tension (physics), tension of a rope or wire rope (also called "cable" or "wire cable"). In its simplest form, it consists of a Bobb ...

(''cable skidder''), just like the old

steam donkey A steam donkey or donkey engine is a steam-powered winch once widely used in logging, mining, maritime, and other industrial applications. Steam-powered donkeys were commonly found on large metal-hulled multi-masted cargo vessels in the lat ...

s, or with a hydraulic grapple either on boom (''grapple skidder'') or on the back of the frame ''(clambunk skidder)''.

History

Early skidders were pulled by a team of

oxen An ox (: oxen), also known as a bullock (in BrE, British, AusE, Australian, and IndE, Indian English), is a large bovine, trained and used as a draft animal. Oxen are commonly castration, castrated adult male cattle, because castration i ...

horse The horse (''Equus ferus caballus'') is a domesticated, one-toed, hoofed mammal. It belongs to the taxonomic family Equidae and is one of two extant subspecies of ''Equus ferus''. The horse has evolved over the past 45 to 55 mi ...

s or

mule The mule is a domestic equine hybrid between a donkey, and a horse. It is the offspring of a male donkey (a jack) and a female horse (a mare). The horse and the donkey are different species, with different numbers of chromosomes; of the two ...

s. The driver would straddle the cart over felled logs, where dangling tongs would be positioned to raise the end of the log off the ground. The team pulled the tongue forward, allowing the log to "skid" along between the rolling wheels. These were known as "slip-tongue wheels" Starting in the early 1920s, animals were gradually replaced by

gasoline Gasoline ( North American English) or petrol ( Commonwealth English) is a petrochemical product characterized as a transparent, yellowish, and flammable liquid normally used as a fuel for spark-ignited internal combustion engines. When for ...

-powered crawlers, although some small operations continue to use horses. In other places, steel "arches" were used behind the crawlers. Similar in function to the slip-tongue wheels, arches were used to reduce friction by raising up one end of the load, which was dangled from a cable which in turn ran down the back of the arch, and was raised or lowered by the crawler's winch. Another piece similar to the arch was the "bummer", which was simply a small trailer to be towed behind a crawler, on top of which one end of the log load would rest. The early mechanical skidders were steam powered. They traveled on railroads, known as "dummylines" and the felled trees were dragged or "skidded" to the railroad where they were later loaded onto rail cars. Some, such as the

s, were relatively simple but other mechanical skidders were more complex. The largest of these mechanical skidders was the

Lidgerwood Lidgerwood was a historic American engineering company famous for its boilers, winches, scrapers, hoists and cranes, particularly ones that helped build the Panama Canal. They later built logging yarders and aerial tramway An aerial t ...

skidder, which not only brought logs to the landing from the cutting site, but loaded them onto railroad cars as well, making it both a skidder and loader. One popular brand was the Clyde Skidder, built by Clyde Ironworks in

Duluth, Minnesota Duluth ( ) is a Port, port city in the U.S. state of Minnesota and the county seat of St. Louis County, Minnesota, St. Louis County. Located on Lake Superior in Minnesota's Arrowhead Region, the city is a hub for cargo shipping. The population ...

. The Clyde was capable of retrieving logs from four different points at the same time. Each cable, or lead, was approximately in length. Once the logs were attached and a clearance signal was sent for retrieval, they could be skidded at a speed of . In New Zealand cables were run five miles. Working conditions around these machines were very dangerous.

Modern equivalents

Contemporary skidders are tracked or

four wheel drive The Four Wheel Drive Auto Company, more often known as Four Wheel Drive (FWD), was a pioneering American company that developed and produced all-wheel drive vehicles. It was founded in 1909 in Clintonville, Wisconsin, as the Badger Four-Wheel Dr ...

tractor A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a Trailer (vehicle), trailer or machinery such as that used in agriculture, mining or constructio ...

s with a

diesel engine The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...

and

steel Steel is an alloy of iron and carbon that demonstrates improved mechanical properties compared to the pure form of iron. Due to steel's high Young's modulus, elastic modulus, Yield (engineering), yield strength, Fracture, fracture strength a ...

, funnel-shaped guards on the rear to protect their wheels. They have articulated steering and usually a small, adjustable, push-blade on the front. The operator/ logger is protected from falling or flying debris (or parted cables, or rolling over) by a steel enclosure. They are one of the few logging machines that is capable of thinning or selective logging in larger timber. Forwarders can haul small short pieces out, however a skidder is one of the few options for taking out some trees while leaving others when thinning mature lumber. The skidder can also be used for pulling tree stumps, pushing over small trees, and preliminary grading of a logging path known as a " skid road". While wood is being yarded (pulled) by the skidder, tree particles and seeds are cultivated into the soil. Skidder logging can be disadvantageous in thinning operations due to the damage caused to remaining trees as branches and trunks are dragged against them, tearing away the protective bark of living trees. Another ecological concern is the deep furrows in the

topsoil Topsoil is the upper layer of soil. It has the highest concentration of organic matter and microorganisms and is where most of the Earth's biological soil activity occurs. Description Topsoil is composed of mineral particles and organic mat ...

sometimes made by skidders, especially when using tires with chains, which alter

surface runoff Surface runoff (also known as overland flow or terrestrial runoff) is the unconfined flow of water over the ground surface, in contrast to ''channel runoff'' (or ''stream flow''). It occurs when excess rainwater, stormwater, meltwater, or other ...

patterns and increases the costs of forest rehabilitation and

reforestation Reforestation is the practice of restoring previously existing forests and woodlands that have been destroyed or damaged. The prior forest destruction might have happened through deforestation, clearcutting or wildfires. Three important purpose ...

Versions

Logging arch

A device similar to a skip tongue log skidder except that it is made of

, including the

spoke A spoke is one of some number of rods radiating from the center of a wheel (the hub where the axle connects), connecting the hub with the round traction surface. The term originally referred to portions of a log that had been riven (split ...

wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...

Cable skidders

On a cable skidder, the cable is reeled out and attached to a pull of cut timber, then the winch pulls the load toward the skidder. The winch or grapple holds the trees while the skidder drags them to a landing area. Cable skidders are more labor-intensive than grapple skidders because someone (the operator or a second person) must drag the winch line out to the logs and hook them up manually. Nowadays, cable skidders are less popular than in the past. These machines are most useful in areas where it is not possible to drive the machine close to the log (such as in steep hills).

Grapple skidders

Grapple skidders use a loader crane boom with a

hydraulic Hydraulics () is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counterpart of pneumatics, which concer ...

grapple bucket to grab and lift the timber. There are three types of 'fixed boom' grapple skidders. A single-function boom type has two hydraulic cylinders, only allowing the boom to lower in one position. Dual-function booms (as pictured) have four cylinders, which allows for adjusting the boom in two different places. The third type permits the grapple boom to be swung from side to side, allowing spread out trees to be grabbed at once. In some areas, loggers have combined a hydraulic claw on the side with the blade of their grapple skidders, making it possible to pile logs in some cases. More common on cable skidders, this also permits hauling back bark and tops when returning from a landing area to fallen timber. Clambunk skidders Clambunk skidders are more of a middle ground between skidder and a

forwarder A forwarder is a forestry vehicle that carries big felling, felled Timber, logs cut by a Harvester (forestry), harvester from the stump to a roadside landing for later acquisition. Forwarders can use rubber tires or tracks. Unlike a skidder, a ...

. They have large free swiveling hydraulic jaws positioned on the back of the chassis that clamp the logs. They usually don't have self-loading capability and require

feller buncher A feller buncher is a type of harvester used in logging. It is a motorized vehicle with an attachment that can rapidly gather and cut a tree before felling it. ''Feller'' is a traditional name for someone who cuts down trees, and ''bunching'' i ...

or other machine with loader arm.

External links

Development of the Rubber Tired Log Skidder

RitchieWiki:Skidder
{{Forestry tools Engineering vehicles Log transport Logging Forestry equipment