A linear response function describes the input-output relationship of a
signal transducer
Signal transduction is the process by which a chemical or physical signal is transmitted through a cell as a series of molecular events, most commonly protein phosphorylation catalyzed by protein kinases, which ultimately results in a cellula ...
such as a radio turning
electromagnetic wave
In physics, electromagnetic radiation (EMR) consists of waves of the electromagnetic (EM) field, which propagate through space and carry momentum and electromagnetic radiant energy. It includes radio waves, microwaves, infrared, (visible ...
s into music or a
neuron
A neuron, neurone, or nerve cell is an membrane potential#Cell excitability, electrically excitable cell (biology), cell that communicates with other cells via specialized connections called synapses. The neuron is the main component of nervous ...
turning
synaptic input into a response. Because of its many applications in
information theory
Information theory is the scientific study of the quantification, storage, and communication of information. The field was originally established by the works of Harry Nyquist and Ralph Hartley, in the 1920s, and Claude Shannon in the 1940s. ...
,
physics
Physics is the natural science that studies matter, its fundamental constituents, its motion and behavior through space and time, and the related entities of energy and force. "Physical science is that department of knowledge which rel ...
and
engineering
Engineering is the use of scientific method, scientific principles to design and build machines, structures, and other items, including bridges, tunnels, roads, vehicles, and buildings. The discipline of engineering encompasses a broad rang ...
there exist alternative names for specific linear response functions such as
susceptibility,
impulse response
In signal processing and control theory, the impulse response, or impulse response function (IRF), of a dynamic system is its output when presented with a brief input signal, called an impulse (). More generally, an impulse response is the reac ...
or
impedance, see also
transfer function
In engineering, a transfer function (also known as system function or network function) of a system, sub-system, or component is a mathematical function that theoretically models the system's output for each possible input. They are widely used ...
. The concept of a
Green's function
In mathematics, a Green's function is the impulse response of an inhomogeneous linear differential operator defined on a domain with specified initial conditions or boundary conditions.
This means that if \operatorname is the linear differenti ...
or
fundamental solution
In mathematics, a fundamental solution for a linear partial differential operator is a formulation in the language of distribution theory of the older idea of a Green's function (although unlike Green's functions, fundamental solutions do not a ...
of an
ordinary differential equation
In mathematics, an ordinary differential equation (ODE) is a differential equation whose unknown(s) consists of one (or more) function(s) of one variable and involves the derivatives of those functions. The term ''ordinary'' is used in contras ...
is closely related.
Mathematical definition
Denote the input of a system by
(e.g. a
force
In physics, a force is an influence that can change the motion of an object. A force can cause an object with mass to change its velocity (e.g. moving from a state of rest), i.e., to accelerate. Force can also be described intuitively as a ...
), and the response of the system by
(e.g. a position). Generally, the value of
will depend not only on the present value of
, but also on past values. Approximately
is a weighted sum of the previous values of
, with the weights given by the linear response function
:
The explicit term on the right-hand side is the
leading order The leading-order terms (or corrections) within a mathematical equation, expression or model are the terms with the largest order of magnitude.J.K.Hunter, ''Asymptotic Analysis and Singular Perturbation Theory'', 2004. http://www.math.ucdavis.edu/~ ...
term of a
Volterra expansion for the full nonlinear response. If the system in question is highly non-linear, higher order terms in the expansion, denoted by the dots, become important and the signal transducer cannot adequately be described just by its linear response function.
The complex-valued
Fourier transform
A Fourier transform (FT) is a mathematical transform that decomposes functions into frequency components, which are represented by the output of the transform as a function of frequency. Most commonly functions of time or space are transformed, ...
of the linear response function is very useful as it describes the output of the system if the input is a sine wave
with frequency
. The output reads
with
amplitude gain and
phase shift
In physics and mathematics, the phase of a periodic function F of some real variable t (such as time) is an angle-like quantity representing the fraction of the cycle covered up to t. It is denoted \phi(t) and expressed in such a scale that it ...
.
Example
Consider a
damped harmonic oscillator with input given by an external driving force
,
The complex-valued
Fourier transform
A Fourier transform (FT) is a mathematical transform that decomposes functions into frequency components, which are represented by the output of the transform as a function of frequency. Most commonly functions of time or space are transformed, ...
of the linear response function is given by
The amplitude gain is given by the magnitude of the complex number
and the phase shift by the arctan of the imaginary part of the function divided by the real one.
From this representation, we see that for small
the Fourier transform
of the linear response function yields a pronounced maximum ("
Resonance
Resonance describes the phenomenon of increased amplitude that occurs when the frequency of an applied periodic force (or a Fourier component of it) is equal or close to a natural frequency of the system on which it acts. When an oscillat ...
") at the frequency
. The linear response function for a harmonic oscillator is mathematically identical to that of an
RLC circuit
An RLC circuit is an electrical circuit consisting of a resistor (R), an inductor (L), and a capacitor (C), connected in series or in parallel. The name of the circuit is derived from the letters that are used to denote the constituent components ...
. The width of the maximum,
typically is much smaller than
so that the
Quality factor
In physics and engineering, the quality factor or ''Q'' factor is a dimensionless parameter that describes how underdamped an oscillator or resonator is. It is defined as the ratio of the initial energy stored in the resonator to the energy l ...
can be extremely large.
Kubo formula
The exposition of linear response theory, in the context of
quantum statistics
Particle statistics is a particular description of multiple particles in statistical mechanics. A key prerequisite concept is that of a statistical ensemble (an idealization comprising the state space of possible states of a system, each labeled w ...
, can be found in a paper by
Ryogo Kubo
was a Japanese mathematical physicist, best known for his works in statistical physics and non-equilibrium statistical mechanics.
Work
In the early 1950s, Kubo transformed research into the linear response properties of near-equilibrium co ...
. This defines particularly the
Kubo formula
The Kubo formula, named for Ryogo Kubo who first presented the formula in 1957, is an equation which expresses the linear response of an observable quantity due to a time-dependent perturbation.
Among numerous applications of the Kubo formula, one ...
, which considers the general case that the "force" is a perturbation of the basic operator of the system, the
Hamiltonian,
where
corresponds to a measurable quantity as input, while the output is the perturbation of the thermal expectation of another measurable quantity
. The Kubo formula then defines the quantum-statistical calculation of the
susceptibility by a general formula involving only the mentioned operators.
As a consequence of the principle of
causality
Causality (also referred to as causation, or cause and effect) is influence by which one event, process, state, or object (''a'' ''cause'') contributes to the production of another event, process, state, or object (an ''effect'') where the ca ...
the complex-valued function
has poles only in the lower half-plane. This leads to the
Kramers–Kronig relations
The Kramers–Kronig relations are bidirectional mathematical relations, connecting the real and imaginary parts of any complex function that is analytic in the upper half-plane. The relations are often used to compute the real part from the im ...
, which relates the real and the imaginary parts of
by integration. The simplest example is once more the
damped harmonic oscillator.
[De Clozeaux,''Linear Response Theory'', in: E. Antončik et al., ''Theory of condensed matter'', IAEA Vienna, 1968]
See also
*
Convolution
In mathematics (in particular, functional analysis), convolution is a mathematical operation on two functions ( and ) that produces a third function (f*g) that expresses how the shape of one is modified by the other. The term ''convolution' ...
*
Green–Kubo relations
*
Fluctuation theorem
*
Dispersion (optics)
In optics, and by analogy other branches of physics dealing with wave propagation, dispersion is the phenomenon in which the phase velocity of a wave depends on its frequency; sometimes the term chromatic dispersion is used for specificity to o ...
*
Lindblad equation
*
Semilinear response
*
Green's function
In mathematics, a Green's function is the impulse response of an inhomogeneous linear differential operator defined on a domain with specified initial conditions or boundary conditions.
This means that if \operatorname is the linear differenti ...
*
Impulse response
In signal processing and control theory, the impulse response, or impulse response function (IRF), of a dynamic system is its output when presented with a brief input signal, called an impulse (). More generally, an impulse response is the reac ...
*
Resolvent formalism In mathematics, the resolvent formalism is a technique for applying concepts from complex analysis to the study of the spectrum of operators on Banach spaces and more general spaces. Formal justification for the manipulations can be found in the fr ...
*
Propagator
In quantum mechanics and quantum field theory, the propagator is a function that specifies the probability amplitude for a particle to travel from one place to another in a given period of time, or to travel with a certain energy and momentum. ...
References
External links
Linear Response Functionsin Eva Pavarini, Erik Koch, Dieter Vollhardt, and Alexander Lichtenstein (eds.): DMFT at 25: Infinite Dimensions, Verlag des Forschungszentrum Jülich, 2014 {{ISBN, 978-3-89336-953-9
Equations of physics