Within
radio
Radio is the technology of communicating using radio waves. Radio waves are electromagnetic waves of frequency between 3 hertz (Hz) and 300 gigahertz (GHz). They are generated by an electronic device called a transmitter connec ...
technology, LTR (Logic Trunked Radio) Standard systems have no dedicated
control channel
In radio communication, a control channel is a central channel that controls other constituent radios by handling data streams. It is most often used in the context of a trunked radio system, where the control channel sends various data which coor ...
. All control data is sent as subaudible data along with voice transmissions. Each system site can have any number of radio channels from 1 through a maximum of 20. Each channel is made up of one channel controller connected to one radio repeater operating on one frequency. One controller is assigned as the master or system controller and all the other controllers report to it via a trunking data buss. This connection allows all the repeaters at a site to operate as one LTR system.
Each channel in the system is assigned a unique number (01 through 20) and these need not be sequentially assigned. Each subscriber radio must be programmed with all channels in the system in proper logical channel order (the same requirement as
EDACS
The Enhanced Digital Access Communication System (EDACS) is a radio communications protocol and product family invented in the General Electric Corporation in the mid 1980s. The rights were eventually bought by Harris Corporation, which eventual ...
systems).
LTR Standard
Talkgroups are written in the format A-HH-GGG.
[http://www.gbppr.net/scanner/LTR-FAQ.pdf
4.4 DATA MESSAGE FORMAT]
* "A" is the area code and is either 0 or 1. The area code is the same for all
Talkgroups in a given system site and is arbitrarily chosen by the system operator; the most common use is to simply distinguish between Talkgroups on multiple systems with geographical overlap.
* "HH" is the home
repeater
In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction. Some ...
number and has twenty possible values, 01 through 20, always noted as two digits. Talkgroups usually use their home
repeater
In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction. Some ...
by default, unless the repeater is already in use by other
Talkgroups. If the home repeater is in use, the
system controller will assign another free
repeater
In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction. Some ...
at random. If no
repeater
In telecommunications, a repeater is an electronic device that receives a signal and retransmits it. Repeaters are used to extend transmissions so that the signal can cover longer distances or be received on the other side of an obstruction. Some ...
is free (all are in use), then the radio will receive a busy signal.
* "GGG" is the group number and has 254 possible binary values, 001 through 254, always noted as three digits. Only values 001-250 are valid LTR IDs, the rest are used internally. For example 253 is used by some controllers while the channel is sending it's FCC required Morse code ID. This flags the channel as unavailable during that time.
References
{{DEFAULTSORT:Ltr Standard
Logic Trunked Radio