LFG Roland D.XVI
   HOME

TheInfoList



OR:

The LFG Roland D.XVI, initially designated the LFG Roland E.I, was a single-seat, single-engine,
parasol wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple wings. A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
German German(s) may refer to: * Germany, the country of the Germans and German things **Germania (Roman era) * Germans, citizens of Germany, people of German ancestry, or native speakers of the German language ** For citizenship in Germany, see also Ge ...
fighter aircraft Fighter aircraft (early on also ''pursuit aircraft'') are military aircraft designed primarily for air-to-air combat. In military conflict, the role of fighter aircraft is to establish air supremacy, air superiority of the battlespace. Domina ...
flown close to the end of
World War I World War I or the First World War (28 July 1914 – 11 November 1918), also known as the Great War, was a World war, global conflict between two coalitions: the Allies of World War I, Allies (or Entente) and the Central Powers. Fighting to ...
. Only two were built.


Design and development

The D.XVI had a fully
cantilever A cantilever is a rigid structural element that extends horizontally and is unsupported at one end. Typically it extends from a flat vertical surface such as a wall, to which it must be firmly attached. Like other structural elements, a cantilev ...
ed fabric covered parasol wing mounted above the
fuselage The fuselage (; from the French language, French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds Aircrew, crew, passengers, or cargo. In single-engine aircraft, it will usually contain an Aircraft engine, engine as wel ...
on a pair of N-form
strut A strut is a structural component commonly found in engineering, aeronautics, architecture and anatomy. Struts generally work by resisting longitudinal compression, but they may also serve in tension. A stay is sometimes used as a synonym for ...
s from the lower fuselage. These struts were laterally stabilized with a near horizontal strut on each side, joining the upper fuselage and the upper end of the rear member of the N. In plan the wing was straight tapered with blunt tips and included a
trailing edge The trailing edge of an aerodynamic surface such as a wing is its rear edge, where the airflow separated by the leading edge meets.Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 521. Aviation Supplies & Academics, 1997. ...
cut-out to improve upward vision from the
cockpit A cockpit or flight deck is the area, on the front part of an aircraft, spacecraft, or submersible, from which a pilot controls the vehicle. The cockpit of an aircraft contains flight instruments on an instrument panel, and the controls th ...
. The wing was quite thick and the
ailerons An aileron (French for "little wing" or "fin") is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft. Ailerons are used in pairs to control the aircraft in roll (or movement around ...
short. Its fuselage was flat-sided and rectangular in cross-section, with
plywood Plywood is a composite material manufactured from thin layers, or "plies", of wood veneer that have been stacked and glued together. It is an engineered wood from the family of manufactured boards, which include plywood, medium-density fibreboa ...
covering. The prototypes differed in the way this covering was applied; on one the grain ran diagonally, on the other longitudinally. They also differed in their vertical tails, one broader and lower than the other. Both had deep horn balanced rudders which extended to the keel. The horizontal tail was mounted at mid-fuselage, with a straight-edged, unswept
tailplane A tailplane, also known as a horizontal stabilizer, is a small lift (force), lifting surface located on the tail (empennage) behind the main lifting surfaces of a fixed-wing aircraft as well as other non-fixed-wing aircraft such as helicopters ...
bearing overhung, balanced
elevator An elevator (American English) or lift (Commonwealth English) is a machine that vertically transports people or freight between levels. They are typically powered by electric motors that drive traction cables and counterweight systems suc ...
s with outward increasing chord. Both prototypes had
conventional undercarriage Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Ter ...
s with a rigid axle mounted to the lower fuselage by V-form struts. The main difference between the two prototypes was in the engines, both fully cowled rotaries. One had a 9-cylinder,
Goebel Goe.III Goebel is a surname. Notable people with the surname include: * Brad Goebel (born 1969), professional American football player * Ed Goebel (1898–1959), Major League Baseball player * Evandro Goebel (born 1986), Brazilian footballer * Florian Goe ...
, the other an 11-cylinder
Siemens-Halske Sh.III The Siemens-Halske Sh.III was an 11-cylinder, air-cooled counter rotary engine developed in Germany during World War I. The engine was a development of the earlier 9-cylinder Siemens-Halske Sh.I. Design The Siemens-Halske Sh.III was an 11-cyli ...
of about the same power. Both two and four blade
propeller A propeller (often called a screw if on a ship or an airscrew if on an aircraft) is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral which, when rotated, exerts linear thrust upon a working flu ...
s were used. The
Idflieg The Idflieg (''Inspektion der Fliegertruppen'' - "Inspectorate of Flying Troops") was the bureau of the German Empire that oversaw German military aviation prior to and during World War I. Founded in 1911, the Idflieg was part of the ''Fliegert ...
allowed the Sh.III engined version to take part in the third D-type competition for fighters even though that engine was not on its approved list. It was faster than either the
Fokker D.VII The Fokker D.VII is a German World War I fighter aircraft designed by Reinhold Platz of the '' Fokker-Flugzeugwerke''. Germany produced around 3,300 D.VII aircraft in the second half of 1918. In service with the ''Luftstreitkräfte'', the D.VII ...
or the Siemens-Schuckert D.IV below but slower at higher altitude.


Specifications (Siemens-Halske engine)


See also

*
LFG Roland D.XVII The LFG Roland D.XVII was a single-seat, single-engine, parasol wing Germany, German fighter aircraft flown close to the end of World War I. Only one was built. Design and development The D.XVII was the last of LFG's line of single-seat fighter ...
*
Fokker D.VIII The Fokker E.V was a German parasol wing, parasol-monoplane fighter aircraft designed by Reinhold Platz and built by Fokker, Fokker-Flugzeugwerke. The E.V was the last Fokker design to become operational with the ''Luftstreitkräfte,'' entering s ...
* Kondor E 3 * Siemens-Schuckert D.VI * Rumpler D.I * Zeppelin-Lindau D.I


Notes


References

{{Idflieg E-class designations Parasol-wing aircraft 1910s German fighter aircraft LFG Roland D.XVI Rotary-engined aircraft Aircraft first flown in 1918