Kodak High-Speed Infrared
   HOME

TheInfoList



OR:

Kodak High-Speed Infrared film, also known as Kodak HIE, was a popular black-and-white infrared photographic film from
Kodak The Eastman Kodak Company, referred to simply as Kodak (), is an American public company that produces various products related to its historic basis in film photography. The company is headquartered in Rochester, New York, and is incorporated i ...
. The film was sensitive to the visible light spectrum (with decreased green sensitivity),
infrared radiation Infrared (IR; sometimes called infrared light) is electromagnetic radiation (EMR) with wavelengths longer than that of visible light but shorter than microwaves. The infrared spectral band begins with the waves that are just longer than those ...
up to 900nm in wavelength, and some
ultraviolet radiation Ultraviolet radiation, also known as simply UV, is electromagnetic radiation of wavelengths of 10–400 nanometers, shorter than that of visible light, but longer than X-rays. UV radiation is present in sunlight and constitutes about 10% of t ...
as well. The prominent blooming or "glow" often seen in the highlights of infrared photographs is an artifact of HIE and not of infrared light itself (nor even of all IR-sensitive films). This is because conventional photographic films have an anti-halation layer that absorbs scattered light, while HIE lacks this backing. As a result, Kodak HIE (which also had a completely transparent base, whereas most films have slightly gray bases) had to be loaded and unloaded in total darkness. Light can enter the film through the tail protruding from a 35mm canister and without a gray base it will be piped into the film and expose it; without an anti-halation layer any light entering the substrate through the emulsion will be reflected back and forth inside the film, becoming diffuse as it travels and causing halation. Nonetheless, HIE was produced without a gray base and anti-halation layers so that sensitivity would be increased by allowing light to reflect back and forth, and because it was difficult to find any way of treating the film that would be effective at infrared wavelengths. HIE featured a
polyester Polyester is a category of polymers that contain one or two ester linkages in every repeat unit of their main chain. As a specific material, it most commonly refers to a type called polyethylene terephthalate (PET). Polyesters include some natura ...
film base A film base is a transparent substrate which acts as a support medium for the photosensitive emulsion that lies atop it. Despite the numerous layers and coatings associated with the emulsion layer, the base generally accounts for the vast majorit ...
that was very stable but susceptible to scratches, and therefore required extra care during development, processing and scanning.


Discontinuation

As of November 2, 2007, "Kodak is preannouncing the discontinuance" of HIE Infrared 35 mm film stating the reasons that, "Demand for these products has been declining significantly in recent years, and it is no longer practical to continue to manufacture given the low volume, the age of the product formulations and the complexity of the processes involved."Kodak
Discontinuance notice
/ref>''"Due to declining demand, Kodak High-Speed Infrared Film / HIE has been discontinued, effective YE 2007."''; Kodak, At the time of this notice, HIE Infrared 135-36 was available at a street price of around $12 a roll at US mail order outlets. Despite the discontinuance of HIE, other newer infrared sensitive emulsions from Rollei and Ilford are still available, but have differing sensitivity and specifications from the long-established HIE.


References

High-Speed Infrared {{photo-stub