The Islander 24 is an American

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by Joseph McGlasson and first built in 1961. The Islander 24 is a

fiberglass Fiberglass (American English) or fibreglass (English in the Commonwealth of Nations, Commonwealth English) is a common type of fibre-reinforced plastic, fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened i ...

development of the wooden-hulled Catalina Islander. The design was developed into the Islander 24 Bahama in 1964.

Development

McGlasson approached Glas Laminates to build a version of his wooden Catalina Islander in fiberglass. The mold was created by using the hull of one of the wooden boats and the resulting fiberglass boats retained the distinctive wooden board imprints from the mold. The Islander 24 features a trunk cabin, but the raised deck Islander 24 Bahama version proved a bigger commercial success and the Islander 24 had a relatively short production run.

Production

The design was built by McGlasson Marine/ Islander Yachts in the

United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...

from 1961 to 1967, but it is now out of production.

Design

The Islander 24 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...

, built predominantly of

, with wood trim. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, a ...

rig, a spooned

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a raised transom, a keel-mounted

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...

controlled by a

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post, rudder post or stock to provide leverage in the form of torque for the helmsman to turn ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...

. It displaces and carries of lead ballast. The boat has a draft of with the standard keel fitted. The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...

of .

References

{{Islander Yachts Keelboats 1960s sailboat type designs Sailing yachts Sailboat type designs by Joseph McGlasson Sailboat types built by Islander Yachts

Development

Production

Design

See also

References