Body styles
The Wizard was first released with five body styles, each available in a choice of three colours. The models were the five-seater family saloon, £270; saloon de luxe, £285; coupe-cabriolet, £299; four-door sports saloon, £299; five-seater tourer, £270. The bare chassis was available for £198. The cheaper family saloon and touring car models came with 19 inch steel artillery wheels. Wire wheels were available for an additional £7 10/-. All other models had wire wheels as standard, and Triplex Safety Glass throughout instead of only for the windscreen. A Hillman Wizard was supplied to the Mechanical Warfare Experimental Establishment MWEE seemingly for testing between 26 September 1931 and 10 November 1932. Source National Archives KewPowertrain
Both engines had a 106 mm stroke, meaning the 65 model measured 2,110 cc and the 75 model measured 2,810 cc The 75 model was predominately targeted towards export markets, given the additional £5 horse-power tax that was payable owing to its larger capacity. TheSuspension and brakes
Suspension was provided by half-elliptic springs at both front and back, with hydraulicSales
It is estimated that about 3,250 Wizards were sold in 1931, approximately 2,186 in 1932, and numbers for 1933 are unknown. These were disappointing results for a car with so much promise, however the tough economic circumstances of the times almost certainly contributed to the weak sales results for a car that provided its owners with a then unfashionable perception of exuberance. Meanwhile, the four-cylinder Hillman Minx was having a far more successful time, selling around 20,000 vehicles per year. The Wizard was discontinued from production in 1933. Rootes entered the six-cylinder market again in 1934, with the introduction of the Hillman 16hp & 20/70 models.References
External links
{{commons category, Hillman Wizard