Hebrew script

The Hebrew alphabet (, ), known variously by scholars as the Ktav Ashuri, Jewish script, square script and block script, is a unicameral abjad script used in the writing of the Hebrew language and other Jewish languages, most notably Yiddish, Ladino, Judeo-Arabic, and Judeo-Persian. In modern Hebrew, vowels are increasingly introduced. It is also used informally in Israel to write Levantine Arabic, especially among Druze. It is an offshoot of the Imperial Aramaic alphabet, which flourished during the Achaemenid Empire and which itself derives from the Phoenician alphabet.

Historically, a different abjad script was used to write Hebrew: the original, old Hebrew script, now known as the Paleo-Hebrew alphabet, has been largely preserved in a variant form as the Samaritan alphabet, and is still used by the Samaritans. The present ''Jewish script'' or ''square script'', on the contrary, is a stylized form of the Aramaic alphabet and was technically known by Jewish sages as Ashurit (), since its origins were known to be from Assyria (Mesopotamia).

Various ''styles'' (in current terms, ''fonts'') of representation of the Jewish script letters described in this article also exist, including a variety of cursive Hebrew styles. In the remainder of this article, the term ''Hebrew alphabet'' refers to the square script unless otherwise indicated.

The Hebrew alphabet has 22 letters. It does not have case. Five letters have different forms when used at the end of a word. Hebrew is written from right to left. Originally, the alphabet was an abjad consisting only of consonants, but is now considered an impure abjad. As with other abjads, such as the Arabic alphabet, during its centuries-long use scribes devised means of indicating vowel sounds by separate vowel points, known in Hebrew as ''niqqud.'' In both biblical and rabbinic Hebrew, the letters can also function as '' matres lectionis'', which is when certain consonants are used to indicate vowels. There is a trend in Modern Hebrew towards the use of ''matres lectionis'' to indicate vowels that have traditionally gone unwritten, a practice known as '' full spelling''.

The Yiddish alphabet, a modified version of the Hebrew alphabet used to write Yiddish, is a true alphabet, with all vowels rendered in the spelling, except in the case of inherited Hebrew words, which typically retain their Hebrew consonant-only spellings.

The Arabic and Hebrew alphabets have similarities in acrophony because it is said that they are both derived from the Aramaic alphabet, which in turn derives from the Phoenician alphabet, both being slight regional variations of the Proto-Canaanite alphabet used in ancient times to write the various Canaanite languages (including Hebrew, Moabite, Phoenician, Punic, et cetera).

History

The Canaanite dialects were largely indistinguishable before around 1000 BCE. An example of related early Semitic inscriptions from the area include the tenth-century Gezer calendar over which scholars are divided as to whether its language is Hebrew or Phoenician and whether the script is Proto-Canaanite or Paleo-Hebrew.

A Hebrew variant of the Proto-Canaanite alphabet, called the Paleo-Hebrew alphabet by scholars, began to emerge around 800 BCE. An example is the Siloam inscription ().

The Paleo-Hebrew alphabet was used in the ancient kingdoms of Israel and Judah. Following the Babylonian exile of the Kingdom of Judah in the 6th century BCE, Jews began using a form of the Imperial Aramaic alphabet, another offshoot of the same family of scripts, which flourished during the Achaemenid Empire (and which in turn had been adopted from the Assyrians). The Samaritans, who remained in the Land of Israel, continued to use the Paleo-Hebrew alphabet. During the 3rd century BCE (after the end of the Achaemenid Empire in 330 BCE), Jews began to use a stylized, "square" form of the Imperial Aramaic alphabet, while the Samaritans continued to use a form of the Paleo-Hebrew script called the Samaritan alphabet. For a few centuries, Jews used both scripts (although use of Paleo-Hebrew was limited then) before eventually, after the 1st century BCE, settling on the square Assyrian form.

The square Hebrew alphabet was later adapted and used for writing languages of the Jewish diasporasuch as Karaim, the Judeo-Arabic languages, Judaeo-Spanish, and Yiddish. The Hebrew alphabet continued in use for scholarly writing in Hebrew and came again into everyday use with the rebirth of the Hebrew language as a spoken language in the 18th and 19th centuries, especially in Israel.

Description

General

In the traditional form, the Hebrew alphabet is an abjad consisting only of consonants, written from right to left. It has 22 letters, five of which use different forms at the end of a word.

Vowels

In the traditional form, vowels are indicated by the weak consonants Aleph (), He (), Waw/Vav (), or Yodh () serving as vowel letters, or ''matres lectionis'': the letter is combined with a previous vowel and becomes silent, or by imitation of such cases in the spelling of other forms. Also, a system of vowel points to indicate vowels (diacritics), called niqqud, was developed. In modern forms of the alphabet, as in the case of Yiddish and to some extent Modern Hebrew, vowels may be indicated. Today, the trend is toward full spelling with the weak letters acting as true vowels.

When used to write Yiddish, vowels are indicated, using certain letters, either with niqqud diacritics (e.g. or ) or without (e.g. or ), except for Hebrew words, which in Yiddish are written in their Hebrew spelling.

To preserve the proper vowel sounds, scholars developed several different sets of vocalization and diacritical symbols called ''nequdot'' (, literally "points"). One of these, the Tiberian system, eventually prevailed. Aaron ben Moses ben Asher, and his family for several generations, are credited for refining and maintaining the system. These points are normally used only for special purposes, such as Biblical books intended for study, in poetry or when teaching the language to children. The Tiberian system also includes a set of cantillation marks, called ''trope'' or , used to indicate how scriptural passages should be chanted in synagogue recitations of scripture (although these marks do not appear in the scrolls). In everyday writing of modern Hebrew, ''niqqud'' are absent; however, patterns of how words are derived from Hebrew roots (called ''shorashim'' or ''triliterals'') allow Hebrew speakers to determine the vowel-structure of a given word from its consonants based on the word's context and part of speech.

Alphabet

Unlike the Paleo-Hebrew writing script, the modern Hebrew script has five letters that have special final forms, called sofit (, meaning in this context "final" or "ending") form, used only at the end of a word, somewhat as in the Greek or in the Arabic and Mandaic alphabets. These are shown below the normal form in the following table (letter names are Unicode standardUnicode names of Hebrew characters at fileformat.info
). Although Hebrew is read and written from right to left, the following table shows the letters in order from left to right:

Order

As far back as the 13th century BCE, ancient Hebrew abecedaries indicate a slightly different ordering of the alphabet. The Zayit Stone, Izbet Sartah ostracon, and one inscription from Kuntillet Ajrud each contain a number of reverse letter orders; such as -, -, -, etc.

A reversal to can be clearly seen in the Book of Lamentations, whose first four chapters are ordered as alphabetical acrostics. In the Masoretic text, the first chapter has the now-usual ordering, and the second, third and fourth chapters exhibit . In the Dead Sea Scrolls version (4QLam/4Q111), reversed ordering also appears in the first chapter (i.e. in all the first four chapters). The fact that these chapters follows the pre-exilic order is evidence for them being written shortly after the events described, rather than being later, post-exilic compositions.

Pronunciation

Alphabet

The descriptions that follow are based on the pronunciation of modern standard Israeli Hebrew.

Shin and sin

Historically, ''left-dot-sin'' corresponds to Proto-Semitic *, which in biblical-Judaic-Hebrew corresponded to the voiceless alveolar lateral fricative (or /ś/).

Dagesh

Historically, the consonants ''bet'', ''gimmel'', ''daleth'', ''kaf'', ''pe'' and ''tav'' each had two sounds: one hard (plosive), and one soft (fricative), depending on the position of the letter and other factors. When vowel diacritics are used, the hard sounds are indicated by a central dot called ''dagesh'' (), while the soft sounds lack a ''dagesh''. In modern Hebrew, however, the ''dagesh'' only changes the pronunciation of ''bet'', ''kaf'', and ''pe'', and does not affect the name of the letter. The differences are as follows:

In other dialects (mainly liturgical) there are variations from this pattern.
*In some Sephardi and Mizrahi dialects, ''bet'' without dagesh is pronounced , like ''bet'' with dagesh
*In Syrian and Yemenite Hebrew, ''gimel'' without dagesh is pronounced .
*In Yemenite Hebrew, and in the Iraqi pronunciation of the word ''Adonai'', ''dalet'' without dagesh is pronounced as in ''these''
*In Ashkenazi Hebrew, as well as Krymchaki Hebrew, ''tav'' without dagesh is pronounced as in ''silk''
*In Iraqi and Yemenite Hebrew, and formerly in some other dialects, ''tav'' without dagesh is pronounced as in ''thick''

Sounds represented with diacritic geresh

The sounds , , , written ⟨⟩, ⟨⟩, ⟨⟩, and , non-standardly sometimes transliterated ⟨⟩, are often found in slang and loanwords that are part of the everyday Hebrew colloquial vocabulary. The symbol resembling an apostrophe after the Hebrew letter modifies the pronunciation of the letter and is called a '' geresh''.

The pronunciation of the following letters can also be modified with the geresh diacritic. The represented sounds are however foreign to Hebrew phonology, i.e., these symbols mainly represent sounds in foreign words or names when transliterated with the Hebrew alphabet, and not loanwords.

''Geresh'' is also used to denote an abbreviation consisting of a single Hebrew letter, while ''gershayim'' (a doubled ''geresh'') are used to denote acronyms pronounced as a string of letters; ''geresh'' and ''gershayim'' are also used to denote Hebrew numerals consisting of a single Hebrew letter or of multiple Hebrew letters, respectively. Geresh is also the name of a cantillation mark used for Torah recitation, though its visual appearance and function are different in that context.

Identical pronunciation

In much of Israel's general population, especially where Ashkenazic pronunciation is prevalent, many letters have the same pronunciation. They are as follows:

* Varyingly

Ancient Hebrew pronunciation

Some of the variations in sound mentioned above are due to a systematic feature of Ancient Hebrew. The six consonants were pronounced differently depending on their position. These letters were also called '' BeGeD KeFeT'' letters . The full details are very complex; this summary omits some points. They were pronounced as plosives at the beginning of a syllable, or when doubled. They were pronounced as fricatives when preceded by a vowel (commonly indicated with a macron, ḇ ḡ ḏ ḵ p̄ ṯ). The plosive and double pronunciations were indicated by the ''dagesh''. In Modern Hebrew the sounds ḏ and ḡ have reverted to and , respectively, and ṯ has become , so only the remaining three consonants show variation. ''resh'' may have also been a "doubled" letter, making the list ''BeGeD KePoReT''. (Sefer Yetzirah, 4:1)

* ''chet'' and ''ayin'' represented the pharyngeal fricatives and , respectively, ''tsadi'' represented the emphatic consonant , ''tet'' represented the emphatic consonant , and ''qof'' represented the uvular plosive . All these are common Semitic consonants.
* ''sin'' (the variant of ''shin'') was originally different from both ''shin'' and ''samekh'', but had become the same as ''samekh'' by the time the vowel pointing was devised. Because of cognates with other Semitic languages, this phoneme is known to have originally been a lateral consonant, most likely the voiceless alveolar lateral fricative (the sound of modern Welsh ''ll'') or the voiceless alveolar lateral affricate (like Náhuatl ''tl'').

Regional and historical variation

The following table contains the pronunciation of the Hebrew letters in reconstructed historical forms and dialects using the International Phonetic Alphabet. The apostrophe-looking symbol after some letters is not a yud but a geresh. It is used for loanwords with non-native Hebrew sounds. The dot in the middle of some of the letters, called a '' dagesh kal'', also modifies the sounds of the letters , and in modern Hebrew (in some forms of Hebrew it modifies also the sounds of the letters , and/or ; the ''dagesh chazak''orthographically indistinguishable from the ''dagesh kal''designates gemination, which today is realized only rarelye.g. in biblical recitations or when using Arabic loanwords).

:

# velarized or pharyngealized
# pharyngealized
# sometimes said to be ejective but more likely glottalized.

Vowels

Matres lectionis

''alef'', ''ayin'', ''waw/vav'' and ''yod'' are letters that can sometimes indicate a vowel instead of a consonant (which would be, respectively, ). When they do, and are considered to constitute part of the vowel designation in combination with a niqqud symbola vowel diacritic (whether or not the diacritic is marked), whereas and are considered to be mute, their role being purely indicative of the non-marked vowel.

:

Vowel points

''Niqqud'' is the system of dots that help determine vowels and consonants. In Hebrew, all forms of ''niqqud'' are often omitted in writing, except for children's books, prayer books, poetry, foreign words, and words which would be ambiguous to pronounce. Israeli Hebrew has five vowel phonemes, , but many more written symbols for them:

Note 1: The circle represents whatever Hebrew letter is used.

Note 2: The pronunciation of ''tsere'' and sometimes ''segol''with or without the letter ''yod''is sometimes ''ei'' in Modern Hebrew. This is not correct in the normative pronunciation and not consistent in the spoken language.

Note 3: The '' dagesh'', ''mappiq'', and '' shuruk'' have different functions, even though they look the same.

Note 4: The letter (''waw/vav'') is used since it can only be represented by that letter.

=Meteg

=

By adding a vertical line (called '' Meteg'') underneath the letter and to the left of the vowel point, the vowel is made long. The ''meteg'' is only used in Biblical Hebrew, not Modern Hebrew.

=Sh'va

=

By adding two vertical dots (called '' sh'va'') underneath the letter, the vowel is made very short. When sh'va is placed on the first letter of the word, mostly it is "è" (but in some instances, it makes the first letter silent without a vowel (vowel-less): e.g. וְ ''wè'' to "w").

=Comparison table

=

Gershayim

The symbol is called a '' gershayim'' and is a punctuation mark used in the Hebrew language to denote acronyms. It is written before the last letter in the acronym, e.g. . ''Gershayim'' is also the name of a cantillation mark in the reading of the Torah, printed above the accented letter, e.g. .

Stylistic variants

The following table displays typographic and chirographic variants of each letter. For the letters that have different forms in word-final position, the final forms are displayed beneath the regular forms.

The block (''square'', or ''print'' form) and cursive (''handwritten'' form) are the only variants in widespread contemporary use. Rashi is also used, for historical reasons, in a handful of standard texts.

Yiddish symbols

Numeric values of letters

Following the adoption of Greek Hellenistic alphabetic numeration practice, Hebrew letters started being used to denote numbers in the late 2nd century BCE, and performed this arithmetic function for about a thousand years.

Transliterations and transcriptions

The following table lists transliterations and transcriptions of Hebrew letters used in Modern Hebrew.

Clarifications:
*For some letters, the Academy of the Hebrew Language offers a ''precise'' transliteration that differs from the ''regular'' standard it has set. When omitted, no such precise alternative exists and the regular standard applies.
*The IPA phonemic transcription is specified whenever it uses a different symbol from the one used for the regular standard Israeli transliteration.
*The IPA phonetic transcription is specified whenever it differs from IPA phonemic transcription.

Note: SBL's transliteration system, recommended in its ''Handbook of Style'', differs slightly from the 2006 ''precise'' transliteration system of the Academy of the Hebrew Language; for ⟨⟩ SBL uses ⟨ṣ⟩ (≠ AHL ⟨ẓ⟩), and for with no dagesh, SBL uses the same symbols as for with dagesh (i.e. ⟨b⟩, ⟨g⟩, ⟨d⟩, ⟨k⟩, ⟨f⟩, ⟨t⟩).

;Notes:
^A1234In transliterations of modern Israeli Hebrew, initial and final (in regular transliteration), silent or initial , and silent are ''not'' transliterated. To the eye of readers orientating themselves on Latin (or similar) alphabets, these letters might seem to be transliterated as vowel letters; however, these are in fact transliterations of the vowel diacriticsniqqud (or are representations of the spoken vowels). E.g., in ("if", ), ("mother", ) and (" nut", ), the letter always represents the same consonant: (glottal stop), whereas the vowels /i/, /e/ and /o/ respectively represent the spoken vowel, whether it is orthographically denoted by diacritics or not. Since the Academy of the Hebrew Language ascertains that in initial position is not transliterated, the symbol for the glottal stop  ʾ  is omitted from the transliteration, and only the subsequent vowels are transliterated (whether or not their corresponding vowel diacritics appeared in the text being transliterated), resulting in "im", "em" and "om", respectively.

^B123The diacritic geresh ⟨⟩ is used with some other letters as well (, , , , , ), but only to transliterate ''from'' other languages ''to'' Hebrewnever to spell Hebrew words; therefore they were not included in this table (correctly translating a Hebrew text with these letters would require using the spelling in the language from which the transliteration to Hebrew was originally made). The non-standard ⟨⟩ and ⟨⟩ are sometimes used to represent , which like , and appears in Hebrew slang and loanwords.

^C12The sound (as ⟨ch⟩ in loch) is often transcribed ⟨ch⟩, inconsistently with the guidelines specified by the Academy of the Hebrew Language: → "cham"; → "schach".

^DAlthough the Bible does include a single occurrence of a final pe with a dagesh (Book of Proverbs 30, 6: ), in modern Hebrew is always represented by pe in its regular, not final, form , even when in word-final position, which occurs with loanwords (e.g. "shop"), foreign names (e.g. "Philip") and some slang (e.g. "slept deeply").

Religious use

The letters of the Hebrew alphabet have played varied roles in Jewish religious literature over the centuries, primarily in mystical texts. Some sources in classical rabbinical literature seem to acknowledge the historical provenance of the currently used Hebrew alphabet and deal with them as a mundane subject (the Jerusalem Talmud, for example, records that "the Israelites took for themselves square calligraphy", and that the letters "came with the Israelites from Ashur ssyria); others attribute mystical significance to the letters, connecting them with the process of creation or the redemption. In mystical conceptions, the alphabet is considered eternal, pre-existent to the Earth, and the letters themselves are seen as having holiness and power, sometimes to such an extent that several stories from the Talmud illustrate the idea that they cannot be destroyed.

The supposed creative powers of the letters are also referenced in the Talmud and Zohar.Zohar 1:3; 2:152

Another book, the 13th-century Kabbalistic text Sefer HaTemunah, holds that a single letter of unknown pronunciation, held by some to be the four-pronged shin on one side of the teffilin box, is missing from the current alphabet. The world's flaws, the book teaches, are related to the absence of this letter, the eventual revelation of which will repair the universe.''The Book of Letters''. Woodstock, Vermont: Jewish Lights Publishing, Woodstock. 1990 Another example of messianic significance attached to the letters is the teaching of Rabbi Eliezer that the five letters of the alphabet with distinct final forms hold the "secret of redemption".

Extensive instructions about the proper methods of forming the letters are found in Mishnat Soferim, within Mishna Berura of Yisrael Meir Kagan.

Mathematical use

In set theory, $\aleph_0$, pronounced aleph-naught, aleph-zero, or aleph-null, is used to mark the cardinal number of an infinite countable set, such as $\mathbb Z$, the set of all integers. More generally, the $\aleph_\alpha$ aleph number notation marks the ordered sequence of all distinct infinite cardinal numbers.

Less frequently used, the $\beth_\alpha$ beth number notation is used for the iterated power sets of $\aleph_0$. The second element $\beth_1$ is the cardinality of the continuum. Very occasionally, a gimel function is used in cardinal notation.

Unicode and HTML

The Unicode Hebrew block extends from U+0590 to U+05FF and from U+FB1D to U+FB4F. It includes letters, ligatures, combining diacritical marks (''Niqqud'' and cantillation marks) and punctuation. The Numeric Character References is included for HTML. These can be used in many markup languages, and they are often used in Wiki to create the Hebrew glyphs compatible with the majority of web browsers.

Standard Hebrew keyboards have a 101-key layout. Like the standard QWERTY layout, the Hebrew layout was derived from the order of letters on Hebrew typewriters.

See also

* Hebrew braille
* Hebrew diacritics
* Cursive Hebrew
* Hebrew punctuation
* Hebrew spelling
* Help:Hebrew
*Inverted nun
* Koren Type
* Ktiv hasar niqqud ("spelling lacking niqqud")
* Significance of numbers of Judaism

Notes

^a"Alef-bet" is commonly written in Israeli Hebrew without the ' (, " ebrewhyphen"), , as opposed to with the hyphen, .

^bThe Arabic letters generally have four forms each, though six of the primary letters can have only two variants, according to their places in words (initial, medial, final, and isolate). The same applies the Mandaic letters, except for three of the 22 letters, which each have only one form.

^cIn forms of Hebrew older than Modern Hebrew, , , and can only be read ''b'', ''k'' and ''p'', respectively, at the beginning of a word, while they will have the sole value of ''v'', ''kh'' and ''f'' in a ''sofit'' (final) position, with few exceptions. In medial positions, both pronunciations are possible. In Modern Hebrew this restriction is not absolute, e.g. and never (= "physicist"), and never (= "snob"). A '' dagesh'' may be inserted to unambiguously denote the plosive variant: = , = , =; similarly (though today very rare in Hebrew and common only in Yiddish) a rafé placed above the letter unambiguously denotes the fricative variant: = , = and = . In Modern Hebrew orthography, the sound at the end of a word is denoted by the regular form , as opposed to the final form , which always denotes (see table of transliterations and transcriptions, comment).

^dHowever, (two separate vavs), used in Ktiv male, is to be distinguished from the ''Yiddish ligature'' (also two vavs but together as one character).

^e1e2e3e4e5The Academy of the Hebrew Language states that both and be indistinguishably represented in Hebrew using the letter vav. Sometimes the vav is indeed doubled, however not to denote as opposed to but rather, when spelling without niqqud, to denote the phoneme /v/ at a non-initial and non-final position in the word, whereas a single vav at a non-initial and non-final position in the word in spelling without niqqud denotes one of the phonemes /u/ or /o/. To pronounce foreign words and loanwords containing the sound , Hebrew readers must therefore rely on former knowledge and context.

Explanatory footnotes

References

Bibliography

* ff.
*
*
*
*

Hoffman, Joel M. 2004. ''In the Beginning: A Short History of the Hebrew Language.'' New York: New York University Press.
*
*

External links

General

How to draw letters

Official Unicode standards document for Hebrew

Unicode collation charts
ncluding Hebrew letters, sorted by shape

Keyboards

LiteType.com
irtual & Interactive Hebrew Keyboard

Mikledet.com
or typing Hebrew with an English keyboard (Hebrew keyboard, Hebrew layout)

Prize Find: Oldest Hebrew Inscription
Biblical Archaeology Review

{{DEFAULTSORT:Hebrew Alphabet

1st-millennium BC introductions
Alphabets
Assyrian (Ashuri) script
Language and mysticism
Right-to-left writing systems
Hebrew language
Abjad writing systems