HOME

TheInfoList



OR:

The Hall Cherokee II is an American
high-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple wings. A monoplane has inherently the highest efficiency and lowest drag of any wing config ...
, single seat glider that was designed by Stan Hall and introduced in 1956 as plans for amateur construction.Said, Bob: ''1983 Sailplane Directory,
Soaring Magazine ''SOARING'' is a magazine published monthly as a membership benefit of the Soaring Society of America. It was first published in 1937. The headquarters is in Hobbs, New Mexico. The magazine's article topics include safety issues and accounts of i ...
'', pages 8-9. Soaring Society of America, November 1983. USPS 499-920
Due to its low cost and ease of construction, the Cherokee II is one of the most produced home-built gliders.


Design and development

The Cherokee was designed by Hall to provide homebuilders with an easy-to-construct and inexpensive aircraft that would give performance at least equal to the
Schweizer SGS 1-26 The Schweizer SGS 1-26 is a United States One-Design, single-seat, mid-wing glider built by Schweizer Aircraft of Elmira, New York.Schweizer Aircraft Corp: The 1-26 Sailplane Flight - Erection - Maintenance Manual, Models A thru E', page 1. Schw ...
, which had flown two years earlier. The Cherokee structure is built from wood and covered in doped
aircraft fabric covering Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...
. The
fuselage The fuselage (; from the French language, French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds Aircrew, crew, passengers, or cargo. In single-engine aircraft, it will usually contain an Aircraft engine, engine as wel ...
features truss construction, with longerons and gussets and a fixed monowheel landing gear. The wing has two spars, with
geodetic Geodesy or geodetics is the science of measuring and representing the geometry, gravity, and spatial orientation of the Earth in temporally varying 3D. It is called planetary geodesy when studying other astronomical bodies, such as planets ...
braces handling the torsion loads and is built with a fixed center section and removable outer wing panels. The wings have spoilers on the top surfaces and use a Gö 549
airfoil An airfoil (American English) or aerofoil (British English) is a streamlined body that is capable of generating significantly more Lift (force), lift than Drag (physics), drag. Wings, sails and propeller blades are examples of airfoils. Foil (fl ...
. As with all plans-built aircraft, builders have made modifications to the design. Some examples have been built with
leading edge The leading edge is the part of the wing that first contacts the air;Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 305. Aviation Supplies & Academics, 1997. alternatively it is the foremost edge of an airfoil sectio ...
s made from
aluminium Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...
,
cardboard Cardboard is a generic term for heavy paper-based products. Their construction can range from a thick paper known as paperboard to corrugated fiberboard, made of multiple plies of material. Natural cardboards can range from grey to light brown ...
,
glass reinforced plastic Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cl ...
and
plywood Plywood is a composite material manufactured from thin layers, or "plies", of wood veneer that have been stacked and glued together. It is an engineered wood from the family of manufactured boards, which include plywood, medium-density fibreboa ...
and with many different styles of canopy.


Operational history

The first Cherokee II to fly was built by Frank Kerns and George McGinnis in 1956. The first flight was done by the designer, Stan Hall, in the late summer of 1956.Soaring Nov/Dec 1956 Cherokee IIs have been used to earn many
Gold badge Gold is a chemical element; it has chemical symbol Au (from Latin ) and atomic number 79. In its pure form, it is a bright, slightly orange-yellow, dense, soft, malleable, and ductile metal. Chemically, gold is a transition metal, a group 11 ...
s as well as some Diamond badge legs. The first 300 km flight of a Cherokee II, for Gold Distance and Diamond Goal, was done by Ray Proenneke in April 1960. To date, the longest distance flown in a Cherokee II is , flown by Jim Hard in June 1965. In July 2012, Tony Condon flew his Cherokee II on a 300 km FAI Triangle closed course flight. Cherokee IIs have occasionally been flown in competition, usually in regional handicapped contests. The prototype Cherokee II was entered in the 1956 US National Championships at
Grand Prairie, Texas Grand Prairie is a city in the U.S. state of Texas, located in Dallas County, Texas, Dallas, Tarrant County, Texas, Tarrant, and Ellis County, Texas, Ellis counties with a small part extending into Johnson County, Texas , Johnson county. It ...
, but was not allowed to compete as it had not flown the FAA-required 50 hours of flight test time within of its home airport. In 1959, two Cherokee IIs competed at the Canadian national contest, with Ross Grady placing second and a team of Jim Reid and Ken Lewandowski coming in third. In ''Class II'' of the 1960 US West Coast Championship, George Asdel and Stan Hall took first and second, respectively, in their Cherokee IIs. Ray Proenneke flew in many US west coast meets and contests in the early 1960s and won the Torrey Pines meet in 1964. Bud Brown flew several regional contests in the US midwest in the late 1960s, placing 7th, winning the handicap trophy, in the Wright Memorial Meet of 1967.Soaring, July 1967 In the 1968 Region 6 Contest Bud flew to 11th overall, but once again won the handicap trophy. In 1967, Peter Newgard flew his Cherokee to first place in the ''25:1 glide ratio and under'' category at the US Region 11 contest. Carl Herold won the 1976 US Region 11 Sports Class contest in a borrowed Cherokee II. In the 1978 US Region 4 Sports Class contest, Ted Garnett came in first in his Cherokee II. Dean Gradwell placed 5th in the US Region 11 Sports Class in 1983, winning one day's competition. Tony Condon placed 3rd in the 2011 US Region 10 Soaring Championships flying his Cherokee II, winning two days. In 2012, Condon flew his Cherokee to a 7th-place finish in the US 13.5 Meter Super Regionals. In March 2011 there were at least two Cherokee IIs in airworthy condition, one in the USA and another in Australia. The original Cherokee RM, built by Ree and Miller, had recently been flown after an extensive restoration. At least three Cherokee IIs were currently undergoing restoration, two in the US and one in Australia.


Variants

;Cherokee II :Original design with a wingspan. About 100 built in the USA, Canada and Australia. ;Cherokee RM :Modified version, designed by Terry Miller and John Ree, first flown in 1966 with a wingspan. The wing has an increased aspect ratio of 16.4:1, producing a wing area of less and a wing loading 1 lb per sq ft higher. The wing uses a
NACA The National Advisory Committee for Aeronautics (NACA) was a United States federal agency that was founded on March 3, 1915, to undertake, promote, and institutionalize aeronautical research. On October 1, 1958, the agency was dissolved and its ...
63(3)-618
laminar flow airfoil An airfoil (American English) or aerofoil (British English) is a streamlined body that is capable of generating significantly more lift than drag. Wings, sails and propeller blades are examples of airfoils. Foils of similar function designed w ...
and achieves a
glide ratio In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air. It describes the aerodynamic efficiency under give ...
of 28:1. About 6 were built. ;Cook LEC-1 Modified Cherokee :Built as a stock Cherokee II by Larry Cook of
Hershey, Pennsylvania Hershey is an Unincorporated area, unincorporated community and census-designated place (CDP) in Derry Township, Dauphin County, Pennsylvania, United States. It is home to the Hershey Company, which was founded by candy magnate Milton S. Hershey ...
the aircraft was damaged and rebuilt with the wing from a Miller Tern, giving it a wingspan of . The aircraft was later further modified by later owners adding span spoilers on the upper wing surfaces, removing the dorsal fin, increasing the fin chord, as well as adding flaps and small rear windows. The aircraft is listed by the FAA as having been built in 1966 and destroyed in 2002.Said, Bob: ''1983 Sailplane Directory,
Soaring Magazine ''SOARING'' is a magazine published monthly as a membership benefit of the Soaring Society of America. It was first published in 1937. The headquarters is in Hobbs, New Mexico. The magazine's article topics include safety issues and accounts of i ...
'', page 46.
Soaring Society of America The Soaring Society of America (SSA) was founded at the instigation of Warren E. Eaton to promote the sport of soaring in the USA and internationally. The first meeting was held in New York City in the McGraw–Hill Building on February 20, 193 ...
November 1983. USPS 499-920
; Leonard Annebula :Version with a wingspan, Prue-style
trailing edge The trailing edge of an aerodynamic surface such as a wing is its rear edge, where the airflow separated by the leading edge meets.Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 521. Aviation Supplies & Academics, 1997. ...
airbrakes and glide ratio of 31:1. One was completed in 1967. ; Jobagy Bagyjo :Version built by John Jobagy and completed in 1962. It featured a Briegleb BG-12 fuselage and empennage with Cherokee II wings.


Aircraft on display

* Aero Space Museum of Calgary - Jobagy Bagyjo * Classic Flyers Museum - Cherokee II *
Dakota Territory Air Museum The Dakota Territory Air Museum is an aviation museum on North Hill, Minot, North Hill in Minot, North Dakota near Minot International Airport. The mission of the Dakota Territory Air Museum is to be a historical aviation resource honoring the ...
- Cherokee II, currently in storage * Iowa Aviation Museum - Cherokee II *
National Soaring Museum The National Soaring Museum (NSM) is an aviation museum whose stated aim is to preserve the history of motorless flight. It is located in Big Flats Town, New York, on top of Harris Hill near Elmira. The NSM is the Soaring Society of America's ...
- Cherokee RM, currently in storage * Southwest Soaring Museum - Cherokee II and Cherokee RM *
Wings of History Museum A wing is a type of fin that produces both lift and drag while moving through air. Wings are defined by two shape characteristics, an airfoil section and a planform. Wing efficiency is expressed as lift-to-drag ratio, which compares the bene ...
- Cherokee II, currently in storage * Airpower Museum - Cherokee II, to be restored to flying condition


Specifications (Cherokee II)


See also


References


External links


List of all known Cherokee IIsPhoto of Cherokee II
in the Classic Flyers Museum
Another photo of Cherokee II
in the Classic Flyers Museum {{Stan Hall aircraft 1950s United States sailplanes Stan Hall gliders Aircraft first flown in 1956