HOME

TheInfoList



OR:

Karl Gustaf Patrik de Laval (; 9 May 1845 – 2 February 1913) was a Swedish engineer and inventor who made important contributions to the design of
steam turbine A steam turbine or steam turbine engine is a machine or heat engine that extracts thermal energy from pressurized steam and uses it to do mechanical work utilising a rotating output shaft. Its modern manifestation was invented by Sir Charles Par ...
s and centrifugal separation machinery for
dairy A dairy is a place where milk is stored and where butter, cheese, and other dairy products are made, or a place where those products are sold. It may be a room, a building, or a larger establishment. In the United States, the word may also des ...
.


Life

Gustaf de Laval was born at Orsa in
Dalarna Dalarna (; ), also referred to by the English exonyms Dalecarlia and the Dales, is a (historical province) in central Sweden. Dalarna adjoins Härjedalen, Hälsingland, Gästrikland, Västmanland and Värmland. It is also bordered by Nor ...
in the Swedish de Laval
Huguenot The Huguenots ( , ; ) are a Religious denomination, religious group of French people, French Protestants who held to the Reformed (Calvinist) tradition of Protestantism. The term, which may be derived from the name of a Swiss political leader, ...
family (immigrated 1622 - Claude de Laval, soldier - knighted de Laval 1647). He enrolled at the Institute of Technology in Stockholm (later the Royal Institute of Technology, KTH) in 1863, receiving a degree in mechanical engineering in 1866, after which he matriculated at
Uppsala University Uppsala University (UU) () is a public university, public research university in Uppsala, Sweden. Founded in 1477, it is the List of universities in Sweden, oldest university in Sweden and the Nordic countries still in operation. Initially fou ...
in 1867. He was then employed by the Swedish mining company, Stora Kopparberg. From there he returned to Uppsala University and completed his doctorate in 1872. He was further employed in Kloster Iron works in Husby parish, Sweden. de Laval was a member of the
Royal Swedish Academy of Sciences The Royal Swedish Academy of Sciences () is one of the Swedish Royal Academies, royal academies of Sweden. Founded on 2 June 1739, it is an independent, non-governmental scientific organization that takes special responsibility for promoting nat ...
from 1886. He was a successful engineer and businessman. He also held national office, being elected to Swedish parliament, from 1888 to 1890 and later became a member of the senate. De Laval died in Stockholm in 1913 at the age of 67.


Contributions


de Laval nozzle A de Laval nozzle (or convergent-divergent nozzle, CD nozzle or con-di nozzle) is a tube which is pinched in the middle, with a rapid convergence and gradual divergence. It is used to accelerate a compressible fluid to supersonic speeds in the a ...

In 1882 he introduced his concept of an impulse steam turbine and in 1887 built a small steam turbine to demonstrate that such devices could be constructed on that scale. In 1890, Laval developed a
nozzle A nozzle is a device designed to control the direction or characteristics of a fluid flow (specially to increase velocity) as it exits (or enters) an enclosed chamber or pipe (material), pipe. A nozzle is often a pipe or tube of varying cross ...
to increase the steam jet to supersonic speed, working from the kinetic energy of the steam, rather than its pressure. The nozzle, now known as a
de Laval nozzle A de Laval nozzle (or convergent-divergent nozzle, CD nozzle or con-di nozzle) is a tube which is pinched in the middle, with a rapid convergence and gradual divergence. It is used to accelerate a compressible fluid to supersonic speeds in the a ...
, is used in modern
rocket engine nozzle A rocket engine nozzle is a propelling nozzle (usually of the de Laval type) used in a rocket engine to expand and accelerate combustion products to high supersonic velocities. Simply: propellants pressurized by either pumps or high pressure ...
s. De Laval turbines can run at up to 30,000 rpm. The turbine wheel was mounted on a long flexible shaft, its two bearings spaced far apart on either side. The higher speed of the turbine demanded that he also design new approaches to reduction gearing, which are still in use today. Since the materials available at the time were not strong enough for the immense centrifugal forces, the output from the turbine was limited, and large scale electric steam generators were dominated by designs using the alternative compound steam turbine approach of Charles Parsons. Using high pressure steam in a turbine that had oil-fed bearings meant that some of the steam contaminated the lube-oil, and as a result, perfecting commercial steam-turbines required that he also develop an effective oil/water separator. After trying several methods, he concluded that a centrifugal separator was the most affordable and effective method. He developed several types, and their success established the centrifugal separator as a useful device in a variety of applications.


De Laval cream separators and Alfa Laval

De Laval also made important contributions to the dairy industry, including the first centrifugal
milk Milk is a white liquid food produced by the mammary glands of lactating mammals. It is the primary source of nutrition for young mammals (including breastfeeding, breastfed human infants) before they are able to digestion, digest solid food. ...
-
cream Cream is a dairy product composed of the higher-fat layer skimmed from the top of milk before homogenization. In un-homogenized milk, the fat, which is less dense, eventually rises to the top. In the industrial production of cream, this proces ...
separator and early
milking machine Milking is the act of removing milk from the mammary glands of cattle, water buffalo, humans, goats, sheep, and, more rarely, camels, horses, and donkeys. Milking may be done by hand or by machine, and requires the animal to be currently or rec ...
, the first of which he patented in 1894. It was not until after his death, however, that the company he founded marketed the first commercially practical milking machine, in 1918. Together with Oscar Lamm, de Laval founded the company Alfa Laval in 1883, which was known as ''AB Separator'' until 1963 when the present name was introduced.


DeLaval

In 1991, Alfa Laval Agri, a company producing dairy and farming machinery was split from Alfa Laval when it was bought by the
Tetra Pak Tetra Pak is a Swedish multinational food packaging and processing company headquartered in Switzerland. The company offers packaging, filling machines and processing for dairy, beverages, cheese, ice cream and prepared food, including distr ...
Group. When Alfa Laval was sold, Alfa Laval Agri remained a part of the Tetra Pak group and was renamed DeLaval, after the company's founder.


Image gallery Gustaf de Laval

File:GustafDeLaval.jpg, Gustaf de Laval at the age around 50. File:Impulse Turbine.jpg, Impulse Turbine by Gustaf de Laval. Built in Sweden, 1888. Deutsches Museum, Munich. File:De Leval boat.jpg, A unique submarine invented by Gustaf de Laval File:De Lavals ångturbinfabrik Järla Nacka 2005-07-31.jpg, The former De Laval steam turbine factory in
Nacka Nacka () is the municipal seat of Nacka Municipality and part of Stockholm urban area in Sweden. The municipality's name harks back to a 16th-century industrial operation established by the Crown at Nacka farmstead where conditions for water mi ...
outside Stockholm, now converted to a conference centre.
He is interred at
Norra begravningsplatsen Norra begravningsplatsen, literally "The Northern Burial Place" in Swedish, is a major cemetery of the Stockholm urban area, located in Solna Municipality. Inaugurated on 9 June 1827, it is the burial site for a number of Swedish notables. Th ...
in Stockholm, Sweden.


See also

* History of the internal combustion engine


References


External links


Alfa Laval
- Official site
DeLaval
- Official site

- Unofficial site {{DEFAULTSORT:Laval, Gustaf de 1845 births 1913 deaths 19th-century Swedish inventors Swedish people of French descent Swedish mechanical engineers Uppsala University alumni KTH Royal Institute of Technology alumni Fluid dynamicists Members of the Royal Swedish Academy of Sciences Swedish company founders Members of the Första kammaren Members of the Andra kammaren Burials at Norra begravningsplatsen 19th-century Swedish businesspeople