HOME

TheInfoList



OR:

In
numerical mathematics Numerical analysis is the study of algorithms that use numerical approximation (as opposed to symbolic manipulations) for the problems of mathematical analysis (as distinguished from discrete mathematics). It is the study of numerical methods th ...
, the gradient discretisation method (GDM) is a framework which contains classical and recent numerical schemes for diffusion problems of various kinds: linear or non-linear, steady-state or time-dependent. The schemes may be conforming or non-conforming, and may rely on very general polygonal or polyhedral meshes (or may even be meshless). Some core properties are required to prove the convergence of a GDM. These core properties enable complete proofs of convergence of the GDM for elliptic and parabolic problems, linear or non-linear. For linear problems, stationary or transient, error estimates can be established based on three indicators specific to the GDM (the quantities C_, S_ and W_, see below). For non-linear problems, the proofs are based on compactness techniques and do not require any non-physical strong regularity assumption on the solution or the model data.J. Droniou, R. Eymard, T. Gallouët, and R. Herbin. Gradient schemes: a generic framework for the discretisation of linear, nonlinear and nonlocal elliptic and parabolic equations. Math. Models Methods Appl. Sci. (M3AS), 23(13):2395–2432, 2013. Non-linear models for which such convergence proof of the GDM have been carried out comprise: the
Stefan problem In mathematics and its applications, particularly to phase transitions in matter, a Stefan problem is a particular kind of boundary value problem for a system of partial differential equations (PDE), in which the boundary between the phases can ...
which is modelling a melting material, two-phase flows in porous media, the
Richards equation The Richards equation represents the movement of water in Vadose zone, unsaturated soils, and is attributed to Lorenzo A. Richards who published the equation in 1931. It is a Differential equation, quasilinear partial differential equation; its anal ...
of underground water flow, the fully non-linear Leray—Lions equations. Any scheme entering the GDM framework is then known to converge on all these problems. This applies in particular to conforming Finite Elements, Mixed Finite Elements, nonconforming Finite Elements, and, in the case of more recent schemes, the
Discontinuous Galerkin method In applied mathematics, discontinuous Galerkin methods (DG methods) form a class of numerical methods for solving differential equations. They combine features of the finite element and the finite volume framework and have been successfully applie ...
, Hybrid Mixed Mimetic method, the Nodal Mimetic Finite Difference method, some Discrete Duality Finite Volume schemes, and some Multi-Point Flux Approximation schemes


The example of a linear diffusion problem

Consider
Poisson's equation Poisson's equation is an elliptic partial differential equation of broad utility in theoretical physics. For example, the solution to Poisson's equation is the potential field caused by a given electric charge or mass density distribution; with t ...
in a bounded open domain \Omega\subset \mathbb^d, with homogeneous
Dirichlet boundary condition In the mathematical study of differential equations, the Dirichlet (or first-type) boundary condition is a type of boundary condition, named after Peter Gustav Lejeune Dirichlet (1805–1859). When imposed on an ordinary or a partial differenti ...
where f\in L^2(\Omega). The usual sense of weak solution to this model is: In a nutshell, the GDM for such a model consists in selecting a finite-dimensional space and two reconstruction operators (one for the functions, one for the gradients) and to substitute these discrete elements in lieu of the continuous elements in (2). More precisely, the GDM starts by defining a Gradient Discretization (GD), which is a triplet D = (X_,\Pi_D,\nabla_D), where: * the set of discrete unknowns X_ is a finite dimensional real vector space, * the function reconstruction \Pi_D~:~X_\to L^2(\Omega) is a linear mapping that reconstructs, from an element of X_, a function over \Omega, * the gradient reconstruction \nabla_D~:~X_\to L^2(\Omega)^d is a linear mapping which reconstructs, from an element of X_, a "gradient" (vector-valued function) over \Omega. This gradient reconstruction must be chosen such that \Vert \nabla_D \cdot \Vert_ is a norm on X_. The related Gradient Scheme for the approximation of (2) is given by: find u\in X_ such that The GDM is then in this case a nonconforming method for the approximation of (2), which includes the nonconforming finite element method. Note that the reciprocal is not true, in the sense that the GDM framework includes methods such that the function \nabla_D u cannot be computed from the function \Pi_D u. The following error estimate, inspired by G. Strang's second lemma, holds and defining: which measures the coercivity (discrete Poincaré constant), which measures the interpolation error, which measures the defect of conformity. Note that the following upper and lower bounds of the approximation error can be derived: Then the core properties which are necessary and sufficient for the convergence of the method are, for a family of GDs, the coercivity, the GD-consistency and the limit-conformity properties, as defined in the next section. More generally, these three core properties are sufficient to prove the convergence of the GDM for linear problems and for some nonlinear problems like the p-Laplace problem. For nonlinear problems such as nonlinear diffusion, degenerate parabolic problems..., we add in the next section two other core properties which may be required.


The core properties allowing for the convergence of a GDM

Let (D_m)_ be a family of GDs, defined as above (generally associated with a sequence of regular meshes whose size tends to 0).


Coercivity

The sequence (C_)_ (defined by ()) remains bounded.


GD-consistency

For all \varphi\in H^1_0(\Omega), \lim_ S_ (\varphi) = 0 (defined by ()).


Limit-conformity

For all \varphi\in H_\operatorname(\Omega), \lim_ W_(\varphi) = 0 (defined by ()). This property implies the coercivity property.


Compactness (needed for some nonlinear problems)

For all sequence (u_m)_ such that u_m \in X_ for all m\in\mathbb and (\Vert u_m \Vert_)_ is bounded, then the sequence (\Pi_ u_m)_ is relatively compact in L^2(\Omega) (this property implies the coercivity property).


Piecewise constant reconstruction (needed for some nonlinear problems)

Let D = (X_, \Pi_D,\nabla_D) be a gradient discretisation as defined above. The operator \Pi_D is a piecewise constant reconstruction if there exists a basis (e_i)_ of X_ and a family of disjoint subsets (\Omega_i)_ of \Omega such that \Pi_D u = \sum_u_i\chi_ for all u=\sum_ u_i e_i\in X_, where \chi_ is the characteristic function of \Omega_i.


Some non-linear problems with complete convergence proofs of the GDM

We review some problems for which the GDM can be proved to converge when the above core properties are satisfied.


Nonlinear stationary diffusion problems

:-\operatorname(\Lambda(\overline)\nabla \overline) = f In this case, the GDM converges under the coercivity, GD-consistency, limit-conformity and compactness properties.


''p''-Laplace problem for ''p'' > 1

:-\operatorname\left(, \nabla \overline, ^\nabla \overline\right) = f In this case, the core properties must be written, replacing L^2(\Omega) by L^p(\Omega), H^1_0(\Omega) by W^_0(\Omega) and H_\operatorname(\Omega) by W_\operatorname^(\Omega) with \frac 1 p +\frac 1 =1, and the GDM converges only under the coercivity, GD-consistency and limit-conformity properties.


Linear and nonlinear heat equation

:\partial_t \overline- \operatorname(\Lambda (\overline) \nabla \overline) = f In this case, the GDM converges under the coercivity, GD-consistency (adapted to space-time problems), limit-conformity and compactness (for the nonlinear case) properties.


Degenerate parabolic problems

Assume that \beta and \zeta are nondecreasing Lipschitz continuous functions: :\partial_t \beta(\overline)-\Delta \zeta(\overline) = f Note that, for this problem, the piecewise constant reconstruction property is needed, in addition to the coercivity, GD-consistency (adapted to space-time problems), limit-conformity and compactness properties.


Review of some numerical methods which are GDM

All the methods below satisfy the first four core properties of GDM (coercivity, GD-consistency, limit-conformity, compactness), and in some cases the fifth one (piecewise constant reconstruction).


Galerkin method In mathematics, in the area of numerical analysis, Galerkin methods, named after the Russian mathematician Boris Galerkin, convert a continuous operator problem, such as a differential equation, commonly in a weak formulation, to a discrete prob ...
s and conforming finite element methods

Let V_h\subset H^1_0(\Omega) be spanned by the finite basis (\psi_i)_. The
Galerkin method In mathematics, in the area of numerical analysis, Galerkin methods, named after the Russian mathematician Boris Galerkin, convert a continuous operator problem, such as a differential equation, commonly in a weak formulation, to a discrete prob ...
in V_h is identical to the GDM where one defines *X_ = \ = \mathbb^I, *\Pi_D u = \sum_ u_i \psi_i *\nabla_D u = \sum_ u_i \nabla\psi_i. In this case, C_D is the constant involved in the continuous Poincaré inequality, and, for all \varphi\in H_\operatorname(\Omega), W_(\varphi) = 0 (defined by ()). Then () and () are implied by Céa's lemma. The "mass-lumped" P^1 finite element case enters the framework of the GDM, replacing \Pi_D u by \widetilde_D u = \sum_ u_i \chi_, where \Omega_i is a dual cell centred on the vertex indexed by i\in I. Using mass lumping allows to get the piecewise constant reconstruction property.


Nonconforming finite element

On a mesh T which is a conforming set of simplices of \mathbb^d, the nonconforming P^1 finite elements are defined by the basis (\psi_i)_ of the functions which are affine in any K\in T, and whose value at the centre of gravity of one given face of the mesh is 1 and 0 at all the others (these finite elements are used in rouzeix ''et al''for the approximation of the Stokes and Navier-Stokes equations). Then the method enters the GDM framework with the same definition as in the case of the Galerkin method, except for the fact that \nabla\psi_i must be understood as the "broken gradient" of \psi_i, in the sense that it is the piecewise constant function equal in each simplex to the gradient of the affine function in the simplex.


Mixed finite element

The mixed finite element method consists in defining two discrete spaces, one for the approximation of \nabla \overline and another one for \overline. It suffices to use the discrete relations between these approximations to define a GDM. Using the low degree Raviart–Thomas basis functions allows to get the piecewise constant reconstruction property.


Discontinuous Galerkin method

The Discontinuous Galerkin method consists in approximating problems by a piecewise polynomial function, without requirements on the jumps from an element to the other. It is plugged in the GDM framework by including in the discrete gradient a jump term, acting as the regularization of the gradient in the distribution sense.


Mimetic finite difference method and nodal mimetic finite difference method

This family of methods is introduced by rezzi ''et al''and completed in ipnikov ''et al''K. Lipnikov, G. Manzini, and M. Shashkov. Mimetic finite difference method. J. Comput. Phys., 257-Part B:1163–1227, 2014. It allows the approximation of elliptic problems using a large class of polyhedral meshes. The proof that it enters the GDM framework is done in roniou ''et al''


See also

*
Finite element method The finite element method (FEM) is a popular method for numerically solving differential equations arising in engineering and mathematical modeling. Typical problem areas of interest include the traditional fields of structural analysis, heat ...


References


External links


The Gradient Discretisation Method
by Jérôme Droniou, Robert Eymard, Thierry Gallouët, Cindy Guichard and
Raphaèle Herbin Raphaèle Herbin is a French applied mathematician; she is known for her work on the finite volume method. Herbin has been a professor at Aix-Marseille University since 1995, and directs the Institut de Mathématiques de Marseille. She earned her ...
{{Numerical PDE, state=expanded Numerical differential equations Numerical analysis