G.9972
   HOME

TheInfoList



OR:

G.9972 (also known as G.cx) is a Recommendation developed by ITU-T that specifies a coexistence mechanism for networking transceivers capable of operating over electrical power line wiring. It allows
G.hn Gigabit Home Networking (G.hn) is a specification for wired home networking that supports speeds up to 2 Gbit/s and operates over four types of legacy wires: telephone wiring, Coaxial cable, coaxial cables, Power line, power lines and pla ...
devices to coexist with other devices implementing G.9972 and operating on the same power line wiring. G.9972 received consent during the meeting of ITU-T Study Group 15, on October 9, 2009, and final approval on June 11, 2010.United Nations ITU-T's G.hn Approved as Global Standard for Wired Home Networking
/ref> G.9972 specifies two mechanisms for coexistence between
G.hn Gigabit Home Networking (G.hn) is a specification for wired home networking that supports speeds up to 2 Gbit/s and operates over four types of legacy wires: telephone wiring, Coaxial cable, coaxial cables, Power line, power lines and pla ...
home networks and
broadband over power lines Broadband over power lines (BPL) is a method of power-line communication (PLC) that allows relatively high-speed digital data transmission over public electric power distribution wiring. BPL uses higher frequencies, a wider frequency range, and di ...
(BPL)
Internet access Internet access is a facility or service that provides connectivity for a computer, a computer network, or other network device to the Internet, and for individuals or organizations to access or use applications such as email and the World Wide ...
networks: *
Frequency-division multiplexing In telecommunications, frequency-division multiplexing (FDM) is a technique by which the total bandwidth (signal processing), bandwidth available in a communication channel, communication medium is divided into a series of non-overlapping freque ...
(FDM), in which the available spectrum is divided into two parts: frequencies below 10 or 14 MHz (specific value can be selected by the access network) are reserved for the access network, while frequencies above them are reserved for the in-home network. * Time-division multiplexing (TDM), in which the available channel time is split equally between both networks. 50% of time slots are allocated for the access network, and 50% are allocated to the in-home network.


References

Networking standards Network protocols Open standards International standards Computer networks ITU-T recommendations ITU-T G Series Recommendations {{telecom-stub