HOME

TheInfoList



OR:

In
general topology In mathematics, general topology (or point set topology) is the branch of topology that deals with the basic set-theoretic definitions and constructions used in topology. It is the foundation of most other branches of topology, including differ ...
and related areas of
mathematics Mathematics is a field of study that discovers and organizes methods, Mathematical theory, theories and theorems that are developed and Mathematical proof, proved for the needs of empirical sciences and mathematics itself. There are many ar ...
, the final topology (or coinduced, weak, colimit, or inductive topology) on a
set Set, The Set, SET or SETS may refer to: Science, technology, and mathematics Mathematics *Set (mathematics), a collection of elements *Category of sets, the category whose objects and morphisms are sets and total functions, respectively Electro ...
X, with respect to a family of functions from
topological spaces In mathematics, a topological space is, roughly speaking, a geometrical space in which closeness is defined but cannot necessarily be measured by a numeric distance. More specifically, a topological space is a set whose elements are called point ...
into X, is the finest topology on X that makes all those functions continuous. The quotient topology on a quotient space is a final topology, with respect to a single surjective function, namely the quotient map. The disjoint union topology is the final topology with respect to the
inclusion map In mathematics, if A is a subset of B, then the inclusion map is the function \iota that sends each element x of A to x, treated as an element of B: \iota : A\rightarrow B, \qquad \iota(x)=x. An inclusion map may also be referred to as an inclu ...
s. The final topology is also the topology that every
direct limit In mathematics, a direct limit is a way to construct a (typically large) object from many (typically smaller) objects that are put together in a specific way. These objects may be groups, rings, vector spaces or in general objects from any cate ...
in the
category of topological spaces In mathematics, the category of topological spaces, often denoted Top, is the category whose objects are topological spaces and whose morphisms are continuous maps. This is a category because the composition of two continuous maps is again con ...
is endowed with, and it is in the context of direct limits that the final topology often appears. A topology is
coherent Coherence is, in general, a state or situation in which all the parts or ideas fit together well so that they form a united whole. More specifically, coherence, coherency, or coherent may refer to the following: Physics * Coherence (physics ...
with some collection of subspaces if and only if it is the final topology induced by the natural inclusions. The dual notion is the
initial topology In general topology and related areas of mathematics, the initial topology (or induced topology or strong topology or limit topology or projective topology) on a set X, with respect to a family of functions on X, is the coarsest topology on X that ...
, which for a given family of functions from a set X into topological spaces is the coarsest topology on X that makes those functions continuous.


Definition

Given a set X and an I-indexed family of
topological space In mathematics, a topological space is, roughly speaking, a Geometry, geometrical space in which Closeness (mathematics), closeness is defined but cannot necessarily be measured by a numeric Distance (mathematics), distance. More specifically, a to ...
s \left(Y_i, \upsilon_i\right) with associated functions f_i : Y_i \to X, the is the finest topology \tau_ on X such that f_i : \left(Y_i, \upsilon_i\right) \to \left(X, \tau_\right) is continuous for each i\in I. The final topology always exists, and is unique. Explicitly, the final topology may be described as follows: :a subset U of X is open in the final topology \left(X, \tau_\right) (that is, U \in \tau_)
if and only if In logic and related fields such as mathematics and philosophy, "if and only if" (often shortened as "iff") is paraphrased by the biconditional, a logical connective between statements. The biconditional is true in two cases, where either bo ...
f_i^(U) is open in \left(Y_i, \upsilon_i\right) for each i\in I. The closed subsets have an analogous characterization: :a subset C of X is closed in the final topology \left(X, \tau_\right) if and only if f_i^(C) is closed in \left(Y_i, \upsilon_i\right) for each i\in I. The family \mathcal of functions that induces the final topology on X is usually a ''set'' of functions. But the same construction can be performed if \mathcal is a
proper class Proper may refer to: Mathematics * Proper map, in topology, a property of continuous function between topological spaces, if inverse images of compact subsets are compact * Proper morphism, in algebraic geometry, an analogue of a proper map f ...
of functions, and the result is still well-defined in
Zermelo–Fraenkel set theory In set theory, Zermelo–Fraenkel set theory, named after mathematicians Ernst Zermelo and Abraham Fraenkel, is an axiomatic system that was proposed in the early twentieth century in order to formulate a theory of sets free of paradoxes suc ...
. In that case there is always a subfamily \mathcal of \mathcal with \mathcal a set, such that the final topologies on X induced by \mathcal and by \mathcal coincide. For more on this, see for example the discussion here. As an example, a commonly used variant of the notion of
compactly generated space In topology, a topological space X is called a compactly generated space or k-space if its topology is determined by compact spaces in a manner made precise below. There is in fact no commonly agreed upon definition for such spaces, as different a ...
is defined as the final topology with respect to a proper class of functions.


Examples

The important special case where the family of maps \mathcal consists of a single surjective map can be completely characterized using the notion of quotient map. A surjective function f : (Y, \upsilon) \to \left(X, \tau\right) between topological spaces is a quotient map if and only if the topology \tau on X coincides with the final topology \tau_ induced by the family \mathcal=\. In particular: the
quotient topology In topology and related areas of mathematics, the quotient space of a topological space under a given equivalence relation is a new topological space constructed by endowing the quotient set of the original topological space with the quotient to ...
is the final topology on the quotient space induced by the quotient map. The final topology on a set X induced by a family of X-valued maps can be viewed as a far reaching generalization of the quotient topology, where multiple maps may be used instead of just one and where these maps are not required to be surjections. Given topological spaces X_i, the disjoint union topology on the
disjoint union In mathematics, the disjoint union (or discriminated union) A \sqcup B of the sets and is the set formed from the elements of and labelled (indexed) with the name of the set from which they come. So, an element belonging to both and appe ...
\coprod_i X_i is the final topology on the disjoint union induced by the natural injections. Given a
family Family (from ) is a Social group, group of people related either by consanguinity (by recognized birth) or Affinity (law), affinity (by marriage or other relationship). It forms the basis for social order. Ideally, families offer predictabili ...
of topologies \left(\tau_i\right)_ on a fixed set X, the final topology on X with respect to the identity maps \operatorname_ : \left(X, \tau_i\right) \to X as i ranges over I, call it \tau, is the
infimum In mathematics, the infimum (abbreviated inf; : infima) of a subset S of a partially ordered set P is the greatest element in P that is less than or equal to each element of S, if such an element exists. If the infimum of S exists, it is unique ...
(or meet) of these topologies \left(\tau_i\right)_ in the
lattice of topologies In topology and related areas of mathematics, the set of all possible topologies on a given set forms a partially ordered set. This order relation can be used for comparison of the topologies. Definition A topology on a set may be defined as the ...
on X. That is, the final topology \tau is equal to the
intersection In mathematics, the intersection of two or more objects is another object consisting of everything that is contained in all of the objects simultaneously. For example, in Euclidean geometry, when two lines in a plane are not parallel, their ...
\tau = \bigcap_ \tau_i. Given a topological space (X,\tau) and a family \mathcal C=\ of subsets of X each having the
subspace topology In topology and related areas of mathematics, a subspace of a topological space (''X'', ''𝜏'') is a subset ''S'' of ''X'' which is equipped with a topology induced from that of ''𝜏'' called the subspace topology (or the relative topology ...
, the final topology \tau_ induced by all the inclusion maps of the C_i into X is finer than (or equal to) the original topology \tau on X. The space X is called
coherent Coherence is, in general, a state or situation in which all the parts or ideas fit together well so that they form a united whole. More specifically, coherence, coherency, or coherent may refer to the following: Physics * Coherence (physics ...
with the family \mathcal C of subspaces if the final topology \tau_ coincides with the original topology \tau. In that case, a subset U\subseteq X will be open in X exactly when the intersection U\cap C_i is open in C_i for each i\in I. (See the coherent topology article for more details on this notion and more examples.) As a particular case, one of the notions of
compactly generated space In topology, a topological space X is called a compactly generated space or k-space if its topology is determined by compact spaces in a manner made precise below. There is in fact no commonly agreed upon definition for such spaces, as different a ...
can be characterized as a certain coherent topology. The
direct limit In mathematics, a direct limit is a way to construct a (typically large) object from many (typically smaller) objects that are put together in a specific way. These objects may be groups, rings, vector spaces or in general objects from any cate ...
of any direct system of spaces and continuous maps is the set-theoretic direct limit together with the final topology determined by the canonical morphisms. Explicitly, this means that if \operatorname_Y = \left(Y_i, f_, I\right) is a direct system in the category Top of topological spaces and if \left(X, \left(f_i\right)_\right) is a direct limit of \operatorname_Y in the category Set of all sets, then by endowing X with the final topology \tau_ induced by \mathcal := \left\, \left(\left(X, \tau_\right), \left(f_i\right)_\right) becomes the direct limit of \operatorname_Y in the category Top. The étalé space of a sheaf is topologized by a final topology. A
first-countable In topology, a branch of mathematics, a first-countable space is a topological space satisfying the "first axiom of countability". Specifically, a space X is said to be first-countable if each point has a countable neighbourhood basis (local base ...
Hausdorff space In topology and related branches of mathematics, a Hausdorff space ( , ), T2 space or separated space, is a topological space where distinct points have disjoint neighbourhoods. Of the many separation axioms that can be imposed on a topologi ...
(X, \tau) is
locally path-connected In topology and other branches of mathematics, a topological space ''X'' is locally connected if every point admits a neighbourhood basis consisting of open connected sets. As a stronger notion, the space ''X'' is locally path connected if e ...
if and only if \tau is equal to the final topology on X induced by the set C\left(
, 1 The comma is a punctuation mark that appears in several variants in different languages. Some typefaces render it as a small line, slightly curved or straight, but inclined from the vertical; others give it the appearance of a miniature fille ...
X\right) of all continuous maps
, 1 The comma is a punctuation mark that appears in several variants in different languages. Some typefaces render it as a small line, slightly curved or straight, but inclined from the vertical; others give it the appearance of a miniature fille ...
\to (X, \tau), where any such map is called a
path A path is a route for physical travel – see Trail. Path or PATH may also refer to: Physical paths of different types * Bicycle path * Bridle path, used by people on horseback * Course (navigation), the intended path of a vehicle * Desir ...
in (X, \tau). If a Hausdorff
locally convex In functional analysis and related areas of mathematics, locally convex topological vector spaces (LCTVS) or locally convex spaces are examples of topological vector spaces (TVS) that generalize normed spaces. They can be defined as topological vec ...
topological vector space In mathematics, a topological vector space (also called a linear topological space and commonly abbreviated TVS or t.v.s.) is one of the basic structures investigated in functional analysis. A topological vector space is a vector space that is als ...
(X, \tau) is a Fréchet-Urysohn space then \tau is equal to the final topology on X induced by the set \operatorname\left(
, 1 The comma is a punctuation mark that appears in several variants in different languages. Some typefaces render it as a small line, slightly curved or straight, but inclined from the vertical; others give it the appearance of a miniature fille ...
X\right) of all arcs in (X, \tau), which by definition are continuous paths
, 1 The comma is a punctuation mark that appears in several variants in different languages. Some typefaces render it as a small line, slightly curved or straight, but inclined from the vertical; others give it the appearance of a miniature fille ...
\to (X, \tau) that are also
topological embedding In mathematics, an embedding (or imbedding) is one instance of some mathematical structure contained within another instance, such as a group that is a subgroup. When some object X is said to be embedded in another object Y, the embedding is g ...
s.


Properties


Characterization via continuous maps

Given functions f_i : Y_i \to X, from topological spaces Y_i to the set X, the final topology on X with respect to these functions f_i satisfies the following property: :a function g from X to some space Z is continuous if and only if g \circ f_i is continuous for each i \in I. This property characterizes the final topology in the sense that if a topology on X satisfies the property above for all spaces Z and all functions g:X\to Z, then the topology on X is the final topology with respect to the f_i.


Behavior under composition

Suppose \mathcal := \left\ is a family of maps, and for every i \in I, the topology \upsilon_i on Y_i is the final topology induced by some family \mathcal_i of maps valued in Y_i. Then the final topology on X induced by \mathcal is equal to the final topology on X induced by the maps \left\. As a consequence: if \tau_ is the final topology on X induced by the family \mathcal := \left\ and if \pi : X \to (S, \sigma) is any
surjective map In mathematics, a surjective function (also known as surjection, or onto function ) is a function such that, for every element of the function's codomain, there exists one element in the function's domain such that . In other words, for a f ...
valued in some topological space (S, \sigma), then \pi : \left(X, \tau_\right) \to (S, \sigma) is a quotient map if and only if (S, \sigma) has the final topology induced by the maps \left\. By the
universal property In mathematics, more specifically in category theory, a universal property is a property that characterizes up to an isomorphism the result of some constructions. Thus, universal properties can be used for defining some objects independently fro ...
of the disjoint union topology we know that given any family of continuous maps f_i : Y_i \to X, there is a unique continuous map f : \coprod_i Y_i \to X that is compatible with the natural injections. If the family of maps f_i X (i.e. each x \in X lies in the image of some f_i) then the map f will be a quotient map if and only if X has the final topology induced by the maps f_i.


Effects of changing the family of maps

Throughout, let \mathcal := \left\ be a family of X-valued maps with each map being of the form f_i : \left(Y_i, \upsilon_i\right) \to X and let \tau_ denote the final topology on X induced by \mathcal. The definition of the final topology guarantees that for every index i, the map f_i : \left(Y_i, \upsilon_i\right) \to \left(X, \tau_\right) is continuous. For any subset \mathcal \subseteq \mathcal, the final topology \tau_ on X will be than (and possibly equal to) the topology \tau_; that is, \mathcal \subseteq \mathcal implies \tau_ \subseteq \tau_, where set equality might hold even if \mathcal is a
proper subset In mathematics, a set ''A'' is a subset of a set ''B'' if all elements of ''A'' are also elements of ''B''; ''B'' is then a superset of ''A''. It is possible for ''A'' and ''B'' to be equal; if they are unequal, then ''A'' is a proper subset ...
of \mathcal. If \tau is any topology on X such that \tau \neq \tau_ and f_i : \left(Y_i, \upsilon_i\right) \to (X, \tau) is continuous for every index i \in I, then \tau must be than \tau_ (meaning that \tau \subseteq \tau_ and \tau \neq \tau_; this will be written \tau \subsetneq \tau_) and moreover, for any subset \mathcal \subseteq \mathcal the topology \tau will also be than the final topology \tau_ that \mathcal induces on X (because \tau_ \subseteq \tau_); that is, \tau \subsetneq \tau_. Suppose that in addition, \mathcal := \left\ is an A-indexed family of X-valued maps g_a : Z_a \to X whose domains are topological spaces \left(Z_a, \zeta_a\right). If every g_a : \left(Z_a, \zeta_a\right) \to \left(X, \tau_\right) is continuous then adding these maps to the family \mathcal will change the final topology on X; that is, \tau_ = \tau_. Explicitly, this means that the final topology on X induced by the "extended family" \mathcal \cup \mathcal is equal to the final topology \tau_ induced by the original family \mathcal = \left\. However, had there instead existed even just one map g_ such that g_ : \left(Z_, \zeta_\right) \to \left(X, \tau_\right) was continuous, then the final topology \tau_ on X induced by the "extended family" \mathcal \cup \mathcal would necessarily be than the final topology \tau_ induced by \mathcal; that is, \tau_ \subsetneq \tau_ (see this footnoteBy definition, the map g_ : \left(Z_, \zeta_\right) \to \left(X, \tau_\right) not being continuous means that there exists at least one open set U \in \tau_ such that g_^(U) is not open in \left(Z_, \zeta_\right). In contrast, by definition of the final topology \tau_, the map g_ : \left(Z_, \zeta_\right) \to \left(X, \tau_\right) be continuous. So the reason why \tau_ must be strictly coarser, rather than strictly finer, than \tau_ is because the failure of the map g_ : \left(Z_, \zeta_\right) \to \left(X, \tau_\right) to be continuous necessitates that one or more open subsets of \tau_ must be "removed" in order for g_ to become continuous. Thus \tau_ is just \tau_ but some open sets "removed" from \tau_. for an explanation).


Final topology on the direct limit of finite-dimensional Euclidean spaces

Let \R^ ~:=~ \left\, denote the , where \R^ denotes the space of all real sequences. For every
natural number In mathematics, the natural numbers are the numbers 0, 1, 2, 3, and so on, possibly excluding 0. Some start counting with 0, defining the natural numbers as the non-negative integers , while others start with 1, defining them as the positive in ...
n \in \N, let \R^n denote the usual
Euclidean space Euclidean space is the fundamental space of geometry, intended to represent physical space. Originally, in Euclid's ''Elements'', it was the three-dimensional space of Euclidean geometry, but in modern mathematics there are ''Euclidean spaces ...
endowed with the
Euclidean topology In mathematics, and especially general topology, the Euclidean topology is the natural topology induced on n-dimensional Euclidean space \R^n by the Euclidean metric. Definition The Euclidean norm on \R^n is the non-negative function \, \cdot ...
and let \operatorname_ : \R^n \to \R^ denote the
inclusion map In mathematics, if A is a subset of B, then the inclusion map is the function \iota that sends each element x of A to x, treated as an element of B: \iota : A\rightarrow B, \qquad \iota(x)=x. An inclusion map may also be referred to as an inclu ...
defined by \operatorname_\left(x_1, \ldots, x_n\right) := \left(x_1, \ldots, x_n, 0, 0, \ldots\right) so that its
image An image or picture is a visual representation. An image can be Two-dimensional space, two-dimensional, such as a drawing, painting, or photograph, or Three-dimensional space, three-dimensional, such as a carving or sculpture. Images may be di ...
is \operatorname \left(\operatorname_\right) = \left\ = \R^n \times \left\ and consequently, \R^ = \bigcup_ \operatorname \left(\operatorname_\right). Endow the set \R^ with the final topology \tau^ induced by the family \mathcal := \left\ of all inclusion maps. With this topology, \R^ becomes a complete Hausdorff
locally convex In functional analysis and related areas of mathematics, locally convex topological vector spaces (LCTVS) or locally convex spaces are examples of topological vector spaces (TVS) that generalize normed spaces. They can be defined as topological vec ...
sequential
topological vector space In mathematics, a topological vector space (also called a linear topological space and commonly abbreviated TVS or t.v.s.) is one of the basic structures investigated in functional analysis. A topological vector space is a vector space that is als ...
that is a
Fréchet–Urysohn space In the field of topology, a Fréchet–Urysohn space is a topological space X with the property that for every subset S \subseteq X the closure of S in X is identical to the ''sequential'' closure of S in X. Fréchet–Urysohn spaces are a spec ...
. The topology \tau^ is strictly finer than the
subspace topology In topology and related areas of mathematics, a subspace of a topological space (''X'', ''𝜏'') is a subset ''S'' of ''X'' which is equipped with a topology induced from that of ''𝜏'' called the subspace topology (or the relative topology ...
induced on \R^ by \R^, where \R^ is endowed with its usual
product topology In topology and related areas of mathematics, a product space is the Cartesian product of a family of topological spaces equipped with a natural topology called the product topology. This topology differs from another, perhaps more natural-seemin ...
. Endow the image \operatorname \left(\operatorname_\right) with the final topology induced on it by the
bijection In mathematics, a bijection, bijective function, or one-to-one correspondence is a function between two sets such that each element of the second set (the codomain) is the image of exactly one element of the first set (the domain). Equival ...
\operatorname_ : \R^n \to \operatorname \left(\operatorname_\right); that is, it is endowed with the Euclidean topology transferred to it from \R^n via \operatorname_. This topology on \operatorname \left( \operatorname_ \right) is equal to the subspace topology induced on it by \left(\R^, \tau^\right). A subset S \subseteq \R^ is open (respectively, closed) in \left(\R^, \tau^\right) if and only if for every n \in \N, the set S \cap \operatorname \left(\operatorname_\right) is an open (respectively, closed) subset of \operatorname \left(\operatorname_\right). The topology \tau^ is coherent with the family of subspaces \mathbb := \left\. This makes \left(\R^, \tau^\right) into an LB-space. Consequently, if v \in \R^ and v_ is a sequence in \R^ then v_ \to v in \left(\R^, \tau^\right) if and only if there exists some n \in \N such that both v and v_ are contained in \operatorname \left(\operatorname_\right) and v_ \to v in \operatorname \left(\operatorname_\right). Often, for every n \in \N, the inclusion map \operatorname_ is used to identify \R^n with its image \operatorname \left(\operatorname_\right) in \R^; explicitly, the elements \left( x_1, \ldots, x_n \right) \in \R^n and \left(x_1, \ldots, x_n, 0, 0, 0, \ldots\right) are identified together. Under this identification, \left(\left(\R^, \tau^\right), \left(\operatorname_\right)_\right) becomes a
direct limit In mathematics, a direct limit is a way to construct a (typically large) object from many (typically smaller) objects that are put together in a specific way. These objects may be groups, rings, vector spaces or in general objects from any cate ...
of the direct system \left(\left(\R^n\right)_, \left(\operatorname_^\right)_, \N\right), where for every m \leq n, the map \operatorname_^ : \R^m \to \R^n is the inclusion map defined by \operatorname_^\left(x_1, \ldots, x_m\right) := \left(x_1, \ldots, x_m, 0, \ldots, 0\right), where there are n - m trailing zeros.


Categorical description

In the language of
category theory Category theory is a general theory of mathematical structures and their relations. It was introduced by Samuel Eilenberg and Saunders Mac Lane in the middle of the 20th century in their foundational work on algebraic topology. Category theory ...
, the final topology construction can be described as follows. Let Y be a
functor In mathematics, specifically category theory, a functor is a Map (mathematics), mapping between Category (mathematics), categories. Functors were first considered in algebraic topology, where algebraic objects (such as the fundamental group) ar ...
from a
discrete category In mathematics, in the field of category theory, a discrete category is a category whose only morphisms are the identity morphisms: :hom''C''(''X'', ''X'') = {id''X''} for all objects ''X'' :hom''C''(''X'', ''Y'') = ∅ for all objects ''X'' ≠ '' ...
J to the
category of topological spaces In mathematics, the category of topological spaces, often denoted Top, is the category whose objects are topological spaces and whose morphisms are continuous maps. This is a category because the composition of two continuous maps is again con ...
Top that selects the spaces Y_i for i \in J. Let \Delta be the
diagonal functor In category theory, a branch of mathematics, the diagonal functor \mathcal \rightarrow \mathcal \times \mathcal is given by \Delta(a) = \langle a,a \rangle, which maps objects as well as morphisms. This functor can be employed to give a succinct a ...
from Top to the
functor category In category theory, a branch of mathematics, a functor category D^C is a category where the objects are the functors F: C \to D and the morphisms are natural transformations \eta: F \to G between the functors (here, G: C \to D is another object i ...
Top''J'' (this functor sends each space X to the constant functor to X). The
comma category In mathematics, a comma category (a special case being a slice category) is a construction in category theory. It provides another way of looking at morphisms: instead of simply relating objects of a Category (mathematics), category to one another ...
(Y \,\downarrow\, \Delta) is then the category of co-cones from Y, i.e. objects in (Y \,\downarrow\, \Delta) are pairs (X, f) where f = (f_i : Y_i \to X)_ is a family of continuous maps to X. If U is the
forgetful functor In mathematics, more specifically in the area of category theory, a forgetful functor (also known as a stripping functor) "forgets" or drops some or all of the input's structure or properties mapping to the output. For an algebraic structure of ...
from Top to Set and Δ′ is the diagonal functor from Set to Set''J'' then the comma category \left(UY \,\downarrow\, \Delta^\right) is the category of all co-cones from UY. The final topology construction can then be described as a functor from \left(UY \,\downarrow\, \Delta^\right) to (Y \,\downarrow\, \Delta). This functor is
left adjoint In mathematics, specifically category theory, adjunction is a relationship that two functors may exhibit, intuitively corresponding to a weak form of equivalence between two related categories. Two functors that stand in this relationship are k ...
to the corresponding forgetful functor.


See also

* * * * *


Notes


Citations


References

* * . ''(Provides a short, general introduction in section 9 and Exercise 9H)'' * {{Topology, expanded General topology