F.E. Baker Ltd
   HOME

TheInfoList



OR:

F. E. Baker Ltd was a British
motorcycle engine A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankel engine, Wankels and electric motors, have been used. Altho ...
and
cyclecar A cyclecar was a type of small, lightweight and inexpensive motorized car manufactured in Europe and the United States between 1910 and the early 1920s. The purpose of cyclecars was to fill a gap in the market between the motorcycle and the c ...
engine manufacturer based in the Precision Works, Moorsom Street,
Birmingham Birmingham ( ) is a City status in the United Kingdom, city and metropolitan borough in the metropolitan county of West Midlands (county), West Midlands, within the wider West Midlands (region), West Midlands region, in England. It is the Lis ...
, England. Founded in 1906 by Frank Edward Baker, the company produced motorcycle engines under the Precision trademark until 1919. Precision engines were used by a wide range of motorcycle manufacturers in the
United Kingdom The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom (UK) or Britain, is a country in Northwestern Europe, off the coast of European mainland, the continental mainland. It comprises England, Scotlan ...
and in other parts of the
Commonwealth A commonwealth is a traditional English term for a political community founded for the common good. The noun "commonwealth", meaning "public welfare, general good or advantage", dates from the 15th century. Originally a phrase (the common-wealth ...
and were also used in cyclecars. Many manufacturers used the 'Precision' trademark as part of their model names, and in 1912 there was a 'Precision' motorcycle sold in Australia, but it is unclear if this was manufactured by F. E. Baker or just permitted use of the trademark by a motorcycle manufacturer.


History

Frank Baker's engine production business grew at a fast rate, and in 1911 they added an 'excellently equipped fitting shop at the works of Messrs Webley and Scott' and by the 1911 Olympia Motorcycle Show in
London London is the Capital city, capital and List of urban areas in the United Kingdom, largest city of both England and the United Kingdom, with a population of in . London metropolitan area, Its wider metropolitan area is the largest in Wester ...
there were 96 motorcycles with Baker's Precision engines. Tom Biggs was appointed as chief designer in 1913. Frank Baker stopped motorcycle & engine production during the
First World War World War I or the First World War (28 July 1914 – 11 November 1918), also known as the Great War, was a World war, global conflict between two coalitions: the Allies of World War I, Allies (or Entente) and the Central Powers. Fighting to ...
. After the war they announced their own motorcycle with 350cc Precision 2-stroke engine designed by Tom Biggs. This had front and rear suspension, unit construction, and a pressed steel petrol tank that formed part of the frame. To inject capital into the company in 1919 the company came to a financial arrangement with
William Beardmore and Company William Beardmore and Company was a British engineering and shipbuilding Conglomerate (company), conglomerate based in Glasgow and the surrounding Clydeside area. It was active from 1886 to the mid-1930s and at its peak employed about 40,000 peo ...
, a Scottish engineering and shipbuilding company based in
Glasgow Glasgow is the Cities of Scotland, most populous city in Scotland, located on the banks of the River Clyde in Strathclyde, west central Scotland. It is the List of cities in the United Kingdom, third-most-populous city in the United Kingdom ...
, and became
Beardmore Precision Motorcycles Beardmore Precision Motorcycles was a British motorcycle manufacturer formed in 1919 when the engine manufacturer F. E. Baker Ltd, who produced motorcycle and cyclecar engines under the 'Precision' trademark before World War I, entered into an a ...
.


Motorcycle engines

F. E. Baker sold engines to motorcycle manufacturers and to dealers under the Precision name, and for some of the larger customers they had their own name cast into the timing cover and the word Precision absent from the crankcase casting. An article in 1914 says that the Peerless Precision V-twin made solely for export was now to be made available in the home market 'under certain circumstances'. Differences from the UK engines included round cylinder fins instead of square and an external flywheel. There was a thriving export market for Precision engines, especially in Australia, where companies like Lewis of Adelaide used the Precision engines. Engines were distributed through sole agents as follows : A. G. Healing of Melbourne for Australia Victor S. Welsford of Durban for South Africa, Rhodesia and Portuguese East Africa J. B. Clarkson Ltd of Wellington for New Zealand is added to adverts from c1913 Whether F. E. Baker manufactured a complete motorcycle before WW1 is unclear, even though a 1912 Precision motorcycle is featured on an Australian postage stamp issued in 2018. It seems more likely the motorcycle was built by another manufacturer using a Precision engine and allowed to use the Precision name. Many Precision engined motorcycles used 'Precision' as part of the model name, hence Ivy-Precision, Grandex-Precision, etc. The 350cc 2-stroke announced in 1919, though, was a complete Precision motorcycle. A remarkably wide range of engines was developed over just a few years - this list is mainly taken from the home market motorcycle engine catalogue circa 1913 (except where otherwise indicated) so does not include variants specific to the overseas market, or the engines adapted for cyclecar use which had modifications like alternative magneto locations. The "Green" engine was unusual in that it was water cooled but with heat exchangers mounted directly on either side of the cylinder. It was used by Ernest Smith and Woodhouse, who were motorcycle manufacturers (1912–1915), in their Regal-Green motorcycle in 1914. They had used other Baker 'Precision' engines in their previous motorcycles which they marketed as Regal-Precision. Another unusual engine project was the development during 1912 of the engine invented by Dr
Archibald Low Archibald Montgomery Low (17 October 1888 – 13 September 1956) developed the first powered drone aircraft. He was an English consulting engineer, research physicist and inventor, and author of more than 40 books. Low has been called the "f ...
in 1911. The engine was titled the ''Forced Induction Engine'', but it used normal atmospheric induction but high pressure fuel admitted directly into the cylinder at peak compression, so in modern parlance would be a petrol direct injection engine. The engine was 104mm bore by 78mm stroke producing 15 bhp at 3,300rpm. It appears this engine did not make it into production, but it embodied some principles that have parallels in diesel engine and petrol direct injection engines of the future. Details of the engine can be found in US Patent 1124157 of 1913. The 170cc engine had the unusual characteristic of horizontal overhead valves located at the rear of the cylinder, as well as unit-construction (see images). The valves were changed the next year to normal side-valves but remained across the rear of the engine, so this was an unusual engine. Engine capacity was increased to 199cc at the same time. The 225cc Precision 2-stroke engine that appears against 3 different manufacturers in the November 1914 buyers guide (see info below) also appears in the 1915 Buyers Guide in the model by Grandex and in a short article on 1916 Torpedo motorcycles in November 1915,The 1916 Torpedos, The Motor Cycle, 25 November 1915, p525 suggesting this engine did enter into production, though production may have been restricted due to the war effort. Even before war orders instructed companies to turn to making parts solely for the war effort, there were serious problems with loss of staff who volunteered for war service.


Motorcycles that used Precision engines

Before WW1 there was a booming business with mainly cycle makers adding motorcycles to their production. This was facilitated by companies that provided engines, forks, seats, gearboxes, magnetos, lights and belt drives, allowing the frame maker to assemble his motorcycle. One of the main engine suppliers was
JA Prestwich Industries J. A. Prestwich Industries, was a British engineering equipment manufacturing company named after founder John Alfred Prestwich, which was formed in 1951 by the amalgamation of J. A. Prestwich and Company Limited and Pencils Ltd. History John ...
(known as JAP), and to some extent F. E. Baker were targeting their market. The Precision V-twin introduced at the Olympia show in November 1911, followed the same 50 degree V angle as the existing JAP V-twin. While some motorcycle and cyclecar manufacturers stuck to a single supplier, others swapped between engine suppliers, and some allowed customers to decide which engine they wanted fitting. In November each year the Motor Cycle show was held at Olympia, and a Buyers Guide published which in most cases revealed the engine supplier used by the companies, enabling an idea of the large number of motorcycles using Precision engines in the UK. Other makes of motorcycle to use Precision engines before WW1, include
Zenith The zenith (, ) is the imaginary point on the celestial sphere directly "above" a particular location. "Above" means in the vertical direction (Vertical and horizontal, plumb line) opposite to the gravity direction at that location (nadir). The z ...
, Cleveland,
New Imperial New Imperial was a British motorcycle manufacturer founded by Norman Downes in Birmingham, between 1887 and 1901, and became New Imperial Motors Ltd in 1912, when serious production commenced. New Imperial made innovative motorcycles that emplo ...
, Coventry-Eagle, Armis,
Chater-Lea Chater-Lea was a British bicycle, car and motorcycle maker with a purpose-built five-storey factory in Banner Street, EC1, in the City of London (now converted into flats) and, from 1928, premises at Letchworth, Hertfordshire. It was founded by ...
, S. G. Neal (Neal Precision) and in Australia
A. G. Healing A is the first letter of the Latin and English alphabet. A may also refer to: Science and technology Quantities and units * ''a'', a measure for the attraction between particles in the Van der Waals equation * ''A'' value, a measure of s ...
had distribution rights for the engines, making their own motorcycles under the tradename 'Peerless', but also supplying others such as Vivian Lewis Ltd, and Bullock.


Cyclecar A cyclecar was a type of small, lightweight and inexpensive motorized car manufactured in Europe and the United States between 1910 and the early 1920s. The purpose of cyclecars was to fill a gap in the market between the motorcycle and the c ...
s that used Precision engines

The following cyclecars used 'Precision' engines. The
Premier Premier is a title for the head of government in central governments, state governments and local governments of some countries. A second in command to a premier is designated as a deputy premier. A premier will normally be a head of govern ...
cyclecar used a 7-9 hp Precision air-cooled engine.The Light Car - a technical history, C. F. Caunter, HMSO 1970, p38 The Morgan three-wheeler from 1912 to 1914 had a Precision V-twin engine option. The Bradwell 4-wheeled cyclecar. The Depford from Depford Co., Evelyn Street, Deptford, London used either the Blumfield, J.A.P., or Precision water-cooled engines. The
Dewcar The Dewcar was a British four-wheeled cyclecar made from 1913 to 1914 by D.E.W. Engineering Co Ltd of Eynsford, Kent. The car was designed by Harold E. Dew and was developed through a series of one-offs starting in 1910. The first production mo ...
, a British four-wheeled cyclecar made from 1913 to 1914 by D.E.W. Engineering Co Ltd of Eynsford, Kent using the single cylinder 597cc air-cooled engine. The J.A.R. cyclecar by J. A. Ryley of Martinean Street, Birmingham used the 964cc air-cooled Precision engine (J. A. Riley produced complete kits of parts to be built by manufacturers or private individuals). The Ranger made by the Ranger Cycle Co, West Orchard, Coventry used the water-cooled version of the 964cc V-twin. The V.A.L. monocar made by V.A.L. Motors, 314 Bradford Street, Birmingham made monocars, and at the 1913 show offered either a model using water cooled Precision V-twin (model KW), or the single cylinder 499cc water-cooled Green motor. The Walker 1912-1914 cyclecar made by R. Walker and Sons of Tyseley, Birmingham, used Precision engines. The Wall Tricarriage of 1913-1915 made by A. W. Wall of Hay Mills, Birmingham used 4 1/4 hp (for goods carrying) or 6 hp (for the two-seater) Precision engines.The Olympia Show - Cyclecars at the show, The Motor Cycle, 27th November 1913, pp1587-1593 The Warne cyclecar, was launched in 1912 with a JAP air-cooled engine, but by 1913 had swapped to air-cooled or water-cooled Precision engines (models K and KW). The Woodrow cyclecar changed from using JAP engines to Precision engines in 1914 or 1915. At the end of WW1 the
Grahame-White Grahame-White was an early British aircraft manufacturer, flying school and later manufacturer of cyclecars. The company was established as ''Grahame-White Aviation Company'' by Claude Grahame-White at Hendon in 1911. The firm built mostly aircra ...
buckboard used the 350cc Precision 2-stroke engine.Forgotten Makes No76 Graham-White, Motorsport, July 1987, p696 https://www.motorsportmagazine.com/archive/article/july-1987/66/simplicity-itself


References

{{British motorcycle manufacturers Motorcycle manufacturers of the United Kingdom Defunct motor vehicle manufacturers of England Defunct companies based in Birmingham, West Midlands