Extrusion coating is the coating of a molten web of

synthetic resin Synthetic resins are industrially produced resins, typically viscous substances that convert into rigid polymers by the process of curing. In order to undergo curing, resins typically contain reactive end groups, such as acrylates or epoxides. ...

onto a substrate material. It is a versatile coating technique used for the economic application of various

plastics Plastics are a wide range of synthetic or semisynthetic materials composed primarily of polymers. Their defining characteristic, plasticity, allows them to be molded, extruded, or pressed into a diverse range of solid forms. This adaptab ...

, notably

polyethylene Polyethylene or polythene (abbreviated PE; IUPAC name polyethene or poly(methylene)) is the most commonly produced plastic. It is a polymer, primarily used for packaging (plastic bags, plastic films, geomembranes and containers including bott ...

, onto

paperboard Paperboard is a thick paper-based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker (usually over 0.30 mm, 0.012 in, or 12 Inch#Equivalents, points) than paper and has certain superior ...

corrugated fiberboard Corrugated fiberboard, corrugated cardboard, or corrugated is a type of packaging material consisting of a fluted corrugated sheet and one or two flat linerboards. It is made on "flute lamination machines" or "corrugators" and is used for maki ...

paper Paper is a thin sheet material produced by mechanically or chemically processing cellulose fibres derived from wood, Textile, rags, poaceae, grasses, Feces#Other uses, herbivore dung, or other vegetable sources in water. Once the water is dra ...

aluminium foil Aluminium foil (or aluminum foil in American English; occasionally called tin foil) is aluminium prepared in thin metal leaves. The foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes ...

cellulose Cellulose is an organic compound with the chemical formula, formula , a polysaccharide consisting of a linear chain of several hundred to many thousands of glycosidic bond, β(1→4) linked glucose, D-glucose units. Cellulose is an important s ...

, non-wovens, or plastic films. It was. first developed in the 1940s for polyethylene coated paper for bags and packaging.

Process

Coating

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a

rubber Rubber, also called India rubber, latex, Amazonian rubber, ''caucho'', or ''caoutchouc'', as initially produced, consists of polymers of the organic compound isoprene, with minor impurities of other organic compounds. Types of polyisoprene ...

covered pressure roller and a chrome plated cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Laminating

Extrusion

laminating Simulated flight (using image stack created by μCT scanning) through the length of a knitting needle that consists of laminated wooden layers: the layers can be differentiated by the change of direction of the wood's vessels Shattered windshi ...

is a similar process except that the extruded hot molten resin acts as the bonding medium to a second web of material.

Co-extrusion

Co-extrusion is, again, a similar process but with two, or more, extruders coupled to a single die head in which the individually extruded melts are brought together and finally extruded as a multi-layer film.

Uses

The market for extrusion coating includes a variety of end-use applications such as liquid packaging, photographic, flexible packaging, mill and industrial wrappings, transport packaging, sack linings, building, envelopes, medical/hygiene, and release base.

References