Extended Reach Drilling (ERD) is
directional drilling of very long non-vertical wells. The aims of ERD are: a) to reach a larger area from one surface drilling location, and b) to keep a well in a reservoir for a longer distance in order to maximize its productivity and drainage capability.
Today's challenges in ERD are hole cleaning, managing the mechanical loads on the
drill string
A drill string on a drilling rig is a column, or string, of drill pipe that transmits drilling fluid (via the mud pumps) and torque (via the kelly drive or top drive) to the Well drilling#Drill bits in mechanical drilling, drill bit. The term ...
and
downhole pressure, and cost.
Definition
Early ERD-well definitions related wells to those that exceeded some step-out/vertical-depth ratio (often 2:1). However, for most highly deviated wells in deepwater environments, this definition clearly does not fit. Some methods have evolved to categorize wells according to their stepout within different vertical-depth ranges. ERD wells then can be described conveniently as shallow, intermediate, deep, and ultradeep. Other variants are associated with operating in deep water and high-pressure/high-temperature environments. Currently, there is no generally accepted ERD-well definition.
What exactly determines a well to be "extended reach" varies over time and location with the development of technologies and of experiences.
* On 24 April 2015 the world's longest borehole was drilled and completed from the Orlan Platform in the Chayvo Field, Sakhalin-1 Project with a total measured depth of 13,500 m (44,294 ft) and a horizontal displacement of 12,030 m (39,469 ft)
Sakhalin-1 sets new extended reach drilling record, Rosneft says
2015
* The previous world record was drilled and completed 30 March 2014 by the Yastreb land drilling rig in the Chayvo Field, Sakhalin-1 Project to a total measured depth of 13,000 m (42,653 ft) and a horizontal displacement of 12,130 m (39,797 ft)
New developments
New technologies have emerged that claim to be pushing the existing boundaries of ERD. One of these is th
See also
* Underbalanced drilling
*Well drilling
Well drilling is the process of drilling a hole in the ground for the extraction of a natural resource such as ground water, brine, natural gas, or petroleum, for the injection of a fluid from surface to a subsurface reservoir or for subsurface ...
*Drilling fluid
In geotechnical engineering, drilling fluid, also known as drilling mud, is used to aid the drilling of boreholes into the earth. Used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also use ...
*Lost circulation
Lost or LOST may refer to getting lost, or to:
Arts, entertainment, and media Television
* ''Lost'' (TV series), a 2004 American drama series about people who become stranded on a mysterious island
* ''Lost'' (2001 TV series), a short-lived Ameri ...
References
{{Authority control
Drilling technology
Petroleum production