HOME

TheInfoList



OR:

In
wireless networks A wireless network is a computer network that uses wireless data connections between network nodes. Wireless networking allows homes, telecommunications networks, and business installations to avoid the costly process of introducing cables in ...
, the exposed node problem occurs when a node is prevented from sending packets to other nodes because of
co-channel interference Co-channel interference or CCI is crosstalk from two different radio transmitters using the same channel. Co-channel interference can be caused by many factors from weather conditions to administrative and design issues. Co-channel interferen ...
with a neighboring transmitter. Consider an example of four nodes labeled R1, S1, S2, and R2, where the two receivers (R1, R2) are out of range of each other, yet the two transmitters (S1, S2) in the middle are in range of each other. Here, if a transmission between S1 and R1 is taking place, node S2 is prevented from transmitting to R2 as it concludes after carrier sense that it will interfere with the transmission by its neighbor S1. However note that R2 could still receive the transmission of S2 without interference because it is out of range of S1. IEEE 802.11 RTS/CTS mechanism helps to solve this problem only if the nodes are synchronized and packet sizes and data rates are the same for both the transmitting nodes. When a node hears an RTS from a neighboring node, but not the corresponding CTS, that node can deduce that it is an exposed node and is permitted to transmit to other neighboring nodes. If the nodes are not synchronised (or if the packet sizes are different or the data rates are different) the problem may occur that the sender will not hear the CTS or the ACK during the transmission of data of the second sender. The exposed node problem is not an issue in
cellular network A cellular network or mobile network is a telecommunications network where the link to and from end nodes is wireless network, wireless and the network is distributed over land areas called ''cells'', each served by at least one fixed-locatio ...
s as the power and distance between cells is controlled to avoid it.


See also

*
Hidden node problem In wireless networking, the hidden node problem or hidden terminal problem occurs when a Node (networking), node can communicate with a wireless access point (AP), but cannot directly communicate with other nodes that are communicating with that ...
* IEEE 802.11 RTS/CTS *
Multiple Access with Collision Avoidance for Wireless Multiple Access with Collision Avoidance for Wireless (MACAW) is a slotted medium access control (MAC) protocol widely used in ad hoc networks. Furthermore, it is the foundation of many other MAC protocols used in wireless sensor networks (WSN). T ...
(MACAW)


References


Further reading

* {{cite web, author=Jayasuriya , title=Hidden vs. Exposed Terminal Problem in Ad hoc Networks, url=http://sandilands.info/sgordon/doc/jayasuriya2004-hidden.pdf, display-authors=etal Wireless networking E